! Started logfile: /scr/pima/bg219a_uvs/J2357-2451_X_dfm.log on Fri May 20 00:24:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2357-2451_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2357-2451_X_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J2357-2451
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 8424 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2357-2451_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005449Jy  sigma=25.653832
! Fit after  self-cal, rms=0.925312Jy  sigma=23.454660
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5524 mas, bmaj=1.47 mas, bpa=3.014 degrees
! Estimated noise=0.72985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0560053 Jy
! Component: 100  -  total flux cleaned = 0.0755795 Jy
! Total flux subtracted in 100 components = 0.0755795 Jy
! Clean residual min=-0.005219 max=0.008677 Jy/beam
! Clean residual mean=-0.000013 rms=0.001348 Jy/beam
! Combined flux in latest and established models = 0.0755795 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0755795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058677Jy  sigma=1.359738
! Fit after  self-cal, rms=0.058333Jy  sigma=1.349938
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00889508 Jy
! Component: 100  -  total flux cleaned = 0.0126981 Jy
! Total flux subtracted in 100 components = 0.0126981 Jy
! Clean residual min=-0.003063 max=0.003662 Jy/beam
! Clean residual mean=-0.000007 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.0882776 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.0882776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056809Jy  sigma=1.300365
! Fit after  self-cal, rms=0.056812Jy  sigma=1.299875
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7305 mas, bmaj=1.863 mas, bpa=5.261 degrees
! Estimated noise=0.321221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00338214 Jy
! Component: 100  -  total flux cleaned = 0.00491048 Jy
! Component: 150  -  total flux cleaned = 0.00565741 Jy
! Component: 200  -  total flux cleaned = 0.00580629 Jy
! Total flux subtracted in 200 components = 0.00580629 Jy
! Clean residual min=-0.002668 max=0.003767 Jy/beam
! Clean residual mean=-0.000020 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.0940839 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.0940839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056650Jy  sigma=1.294468
! Fit after  self-cal, rms=0.056698Jy  sigma=1.294273
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7305 x 1.863 at 5.261 degrees (North through East)
! Clean map  min=-0.002417  max=0.075182 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.14     NL        1.04     OV        1.01     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.14     NL        1.00     OV        1.07     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.07     NL        1.02     OV        1.01     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.07     NL        1.09     OV        1.03     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.10     NL        1.08     OV        1.07     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.09     OV        1.03     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.00     NL        1.03     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.05     OV        1.00     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.07     OV        1.00     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.84     NL        0.98     OV        1.04     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.056698Jy  sigma=1.294273
! Fit after  self-cal, rms=0.057331Jy  sigma=1.289776
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7344 mas, bmaj=1.878 mas, bpa=5.558 degrees
! Estimated noise=0.323084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.4, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312723 Jy
! Component: 100  -  total flux cleaned = 0.00411859 Jy
! Component: 150  -  total flux cleaned = 0.00443731 Jy
! Component: 200  -  total flux cleaned = 0.00467731 Jy
! Total flux subtracted in 200 components = 0.00467731 Jy
! Clean residual min=-0.001621 max=0.001756 Jy/beam
! Clean residual mean=-0.000003 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.0987612 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.0987612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057179Jy  sigma=1.285286
! Fit after  self-cal, rms=0.057152Jy  sigma=1.284346
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057152Jy  sigma=1.284346
! Fit after  self-cal, rms=0.056712Jy  sigma=1.281909
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7338 mas, bmaj=1.878 mas, bpa=5.469 degrees
! Estimated noise=0.320852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000676791 Jy
! Component: 100  -  total flux cleaned = 0.000840104 Jy
! Component: 150  -  total flux cleaned = 0.000952803 Jy
! Component: 200  -  total flux cleaned = 0.0010777 Jy
! Total flux subtracted in 200 components = 0.0010777 Jy
! Clean residual min=-0.001358 max=0.001487 Jy/beam
! Clean residual mean=-0.000001 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.0998389 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 40 components and 0.0998389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056676Jy  sigma=1.281011
! Fit after  self-cal, rms=0.056684Jy  sigma=1.280739
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (23.6, 30.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103282 Jy
! Component: 100  -  total flux cleaned = 0.00119938 Jy
! Component: 150  -  total flux cleaned = 0.00128847 Jy
! Component: 200  -  total flux cleaned = 0.00134222 Jy
! Total flux subtracted in 200 components = 0.00134222 Jy
! Clean residual min=-0.001307 max=0.001296 Jy/beam
! Clean residual mean=-0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.101181 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 54 components and 0.101181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056633Jy  sigma=1.279749
! Fit after  self-cal, rms=0.056621Jy  sigma=1.279598
! Inverting map 
! Added new window around map position (-36.2, 41.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105598 Jy
! Component: 100  -  total flux cleaned = 0.00128067 Jy
! Component: 150  -  total flux cleaned = 0.00133547 Jy
! Component: 200  -  total flux cleaned = 0.0013613 Jy
! Total flux subtracted in 200 components = 0.0013613 Jy
! Clean residual min=-0.001174 max=0.001203 Jy/beam
! Clean residual mean=-0.000001 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.102542 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 64 components and 0.102542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056577Jy  sigma=1.278688
! Fit after  self-cal, rms=0.056568Jy  sigma=1.278569
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056568Jy  sigma=1.278569
! Fit after  self-cal, rms=0.056400Jy  sigma=1.278338
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7349 mas, bmaj=1.885 mas, bpa=5.631 degrees
! Estimated noise=0.320592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000478308 Jy
! Component: 100  -  total flux cleaned = 0.000568794 Jy
! Component: 150  -  total flux cleaned = 0.000647394 Jy
! Component: 200  -  total flux cleaned = 0.000670846 Jy
! Total flux subtracted in 200 components = 0.000670846 Jy
! Clean residual min=-0.001109 max=0.001173 Jy/beam
! Clean residual mean=-0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.103213 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 74 components and 0.103213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056367Jy  sigma=1.277756
! Fit after  self-cal, rms=0.056362Jy  sigma=1.277676
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000242629 Jy
! Component: 100  -  total flux cleaned = 0.000268846 Jy
! Component: 150  -  total flux cleaned = 0.00026872 Jy
! Component: 200  -  total flux cleaned = 0.000246166 Jy
! Total flux subtracted in 200 components = 0.000246166 Jy
! Clean residual min=-0.001080 max=0.001109 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.103459 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 79 components and 0.103459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056336Jy  sigma=1.277262
! Fit after  self-cal, rms=0.056325Jy  sigma=1.277215
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056325Jy  sigma=1.277215
! Fit after  self-cal, rms=0.056209Jy  sigma=1.277165
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.058 mas, bmaj=6.212 mas, bpa=0.8832 degrees
! Estimated noise=0.413156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.71691e-05 Jy
! Component: 100  -  total flux cleaned = -2.12607e-05 Jy
! Component: 150  -  total flux cleaned = -4.74992e-05 Jy
! Component: 200  -  total flux cleaned = -7.03456e-05 Jy
! Total flux subtracted in 200 components = -7.03456e-05 Jy
! Clean residual min=-0.000764 max=0.000662 Jy/beam
! Clean residual mean=-0.000002 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.103389 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 92 components and 0.103389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056204Jy  sigma=1.277066
! Fit after  self-cal, rms=0.056200Jy  sigma=1.277051
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.96964e-05 Jy
! Component: 100  -  total flux cleaned = 1.30856e-05 Jy
! Component: 150  -  total flux cleaned = 6.96343e-06 Jy
! Component: 200  -  total flux cleaned = 1.50106e-06 Jy
! Total flux subtracted in 200 components = 1.50106e-06 Jy
! Clean residual min=-0.000739 max=0.000615 Jy/beam
! Clean residual mean=-0.000002 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.103391 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 0.103391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056198Jy  sigma=1.277016
! Fit after  self-cal, rms=0.056197Jy  sigma=1.277012
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7354 mas, bmaj=1.889 mas, bpa=5.714 degrees
! Estimated noise=0.320588 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7354 x 1.889 at 5.714 degrees (North through East)
! Clean map  min=-0.0028764  max=0.075474 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5543 mas, bmaj=1.488 mas, bpa=3.655 degrees
! Estimated noise=0.738251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.056517 Jy
! Component: 100  -  total flux cleaned = 0.0765852 Jy
! Component: 150  -  total flux cleaned = 0.0850594 Jy
! Component: 200  -  total flux cleaned = 0.0897661 Jy
! Total flux subtracted in 200 components = 0.0897661 Jy
! Clean residual min=-0.003771 max=0.003956 Jy/beam
! Clean residual mean=-0.000005 rms=0.000899 Jy/beam
! Combined flux in latest and established models = 0.0897661 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0897661 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7354 mas, bmaj=1.889 mas, bpa=5.714 degrees
! Estimated noise=0.320588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00422416 Jy
! Component: 100  -  total flux cleaned = 0.00686496 Jy
! Component: 150  -  total flux cleaned = 0.00795826 Jy
! Component: 200  -  total flux cleaned = 0.00885481 Jy
! Total flux subtracted in 200 components = 0.00885481 Jy
! Clean residual min=-0.001719 max=0.001657 Jy/beam
! Clean residual mean=-0.000007 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0986209 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.0986209 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.058 mas, bmaj=6.212 mas, bpa=0.8832 degrees
! Estimated noise=0.413156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150293 Jy
! Component: 100  -  total flux cleaned = 0.00242547 Jy
! Component: 150  -  total flux cleaned = 0.0030976 Jy
! Component: 200  -  total flux cleaned = 0.00349418 Jy
! Total flux subtracted in 200 components = 0.00349418 Jy
! Clean residual min=-0.000936 max=0.000749 Jy/beam
! Clean residual mean=-0.000006 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.102115 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265252 Jy
! Component: 100  -  total flux cleaned = 0.000471174 Jy
! Component: 150  -  total flux cleaned = 0.000634728 Jy
! Component: 200  -  total flux cleaned = 0.000727402 Jy
! Total flux subtracted in 200 components = 0.000727402 Jy
! Clean residual min=-0.000811 max=0.000658 Jy/beam
! Clean residual mean=-0.000003 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.102843 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 54 components and 0.102843 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7354 mas, bmaj=1.889 mas, bpa=5.714 degrees
! Estimated noise=0.320588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267542 Jy
! Component: 100  -  total flux cleaned = 0.000224559 Jy
! Component: 150  -  total flux cleaned = 0.000107456 Jy
! Component: 200  -  total flux cleaned = 7.12161e-05 Jy
! Total flux subtracted in 200 components = 7.12161e-05 Jy
! Clean residual min=-0.001220 max=0.001242 Jy/beam
! Clean residual mean=-0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.102914 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.102914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056246Jy  sigma=1.277702
! Fit after  self-cal, rms=0.056265Jy  sigma=1.277430
wmodel /J2357-2451_X_map.mod
! wmodel: Unable to open new model file: /J2357-2451_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2357-2451_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7354 x 1.889 at 5.714 degrees (North through East)
! Clean map  min=-0.0016834  max=0.075165 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2357-2451_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0751649 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000294306 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.17464 1.17464 2.34928 4.69857 9.39713 18.7943 37.5885 75.177
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  255.397 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2357-2451_X_dfm.log closed on Fri May 20 00:24:48 2016