! Started logfile: /scr/pima/bg219a_uvs/J2357-2451_S_uvs.log on Wed Apr  6 23:05:59 2016
obs /scr/pima/bg219a_uvs/J2357-2451_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2357-2451_S_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2357-2451
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3120 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J2357-2451_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021744Jy  sigma=20.301350
! Fit after  self-cal, rms=0.860975Jy  sigma=17.085343
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.203 mas, bmaj=5.653 mas, bpa=0.3629 degrees
! Estimated noise=1.06879 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108668 Jy
! Component: 100  -  total flux cleaned = 0.136819 Jy
! Total flux subtracted in 100 components = 0.136819 Jy
! Clean residual min=-0.007776 max=0.013018 Jy/beam
! Clean residual mean=-0.000042 rms=0.002205 Jy/beam
! Combined flux in latest and established models = 0.136819 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.136819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066349Jy  sigma=1.239171
! Fit after  self-cal, rms=0.066315Jy  sigma=1.237770
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.636 mas, bmaj=6.669 mas, bpa=-1.876 degrees
! Estimated noise=0.674299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140024 Jy
! Component: 100  -  total flux cleaned = 0.0201931 Jy
! Component: 150  -  total flux cleaned = 0.0230522 Jy
! Component: 200  -  total flux cleaned = 0.0237992 Jy
! Total flux subtracted in 200 components = 0.0237992 Jy
! Clean residual min=-0.003682 max=0.004198 Jy/beam
! Clean residual mean=-0.000012 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.160618 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 25 components and 0.160618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063560Jy  sigma=1.181126
! Fit after  self-cal, rms=0.063502Jy  sigma=1.179411
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.636 x 6.669 at -1.876 degrees (North through East)
! Clean map  min=-0.0034256  max=0.13872 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        0.97     OV        1.02     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.98     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.95     NL        1.00     OV        1.06     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.06     NL        0.98     OV        0.96     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.063502Jy  sigma=1.179411
! Fit after  self-cal, rms=0.062414Jy  sigma=1.174748
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.631 mas, bmaj=6.651 mas, bpa=-1.634 degrees
! Estimated noise=0.668816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194809 Jy
! Component: 100  -  total flux cleaned = 0.00210401 Jy
! Component: 150  -  total flux cleaned = 0.00215104 Jy
! Component: 200  -  total flux cleaned = 0.0021537 Jy
! Total flux subtracted in 200 components = 0.0021537 Jy
! Clean residual min=-0.003037 max=0.003042 Jy/beam
! Clean residual mean=-0.000001 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.162772 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.162772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062302Jy  sigma=1.172834
! Fit after  self-cal, rms=0.062272Jy  sigma=1.172543
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062272Jy  sigma=1.172543
! Fit after  self-cal, rms=0.061975Jy  sigma=1.169494
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.625 mas, bmaj=6.621 mas, bpa=-1.748 degrees
! Estimated noise=0.667446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121911 Jy
! Component: 100  -  total flux cleaned = 0.0013179 Jy
! Component: 150  -  total flux cleaned = 0.00135771 Jy
! Component: 200  -  total flux cleaned = 0.00137538 Jy
! Total flux subtracted in 200 components = 0.00137538 Jy
! Clean residual min=-0.002725 max=0.002896 Jy/beam
! Clean residual mean=-0.000007 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.164147 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 50 components and 0.164148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061946Jy  sigma=1.169015
! Fit after  self-cal, rms=0.061940Jy  sigma=1.168907
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (112.5, -65).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025883 Jy
! Component: 100  -  total flux cleaned = 0.00302631 Jy
! Component: 150  -  total flux cleaned = 0.00331684 Jy
! Component: 200  -  total flux cleaned = 0.003588 Jy
! Total flux subtracted in 200 components = 0.003588 Jy
! Clean residual min=-0.002419 max=0.002202 Jy/beam
! Clean residual mean=-0.000009 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.167736 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 70 components and 0.167735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061817Jy  sigma=1.166403
! Fit after  self-cal, rms=0.061813Jy  sigma=1.166173
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061813Jy  sigma=1.166173
! Fit after  self-cal, rms=0.061736Jy  sigma=1.165920
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.624 mas, bmaj=6.617 mas, bpa=-1.763 degrees
! Estimated noise=0.666206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000785743 Jy
! Component: 100  -  total flux cleaned = 0.00114195 Jy
! Component: 150  -  total flux cleaned = 0.00133776 Jy
! Component: 200  -  total flux cleaned = 0.00143904 Jy
! Total flux subtracted in 200 components = 0.00143904 Jy
! Clean residual min=-0.002377 max=0.002120 Jy/beam
! Clean residual mean=-0.000013 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.169175 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 77 components and 0.169175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061705Jy  sigma=1.165327
! Fit after  self-cal, rms=0.061708Jy  sigma=1.165289
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361202 Jy
! Component: 100  -  total flux cleaned = 0.00047871 Jy
! Component: 150  -  total flux cleaned = 0.000522384 Jy
! Component: 200  -  total flux cleaned = 0.000583796 Jy
! Total flux subtracted in 200 components = 0.000583796 Jy
! Clean residual min=-0.002303 max=0.002113 Jy/beam
! Clean residual mean=-0.000013 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.169758 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.169758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061693Jy  sigma=1.165013
! Fit after  self-cal, rms=0.061693Jy  sigma=1.165003
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061693Jy  sigma=1.165003
! Fit after  self-cal, rms=0.061685Jy  sigma=1.164961
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.119 mas, bmaj=19.1 mas, bpa=-0.5247 degrees
! Estimated noise=0.910192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000701211 Jy
! Component: 100  -  total flux cleaned = 0.00115412 Jy
! Component: 150  -  total flux cleaned = 0.00132983 Jy
! Component: 200  -  total flux cleaned = 0.00140066 Jy
! Total flux subtracted in 200 components = 0.00140066 Jy
! Clean residual min=-0.002245 max=0.001873 Jy/beam
! Clean residual mean=-0.000027 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.171159 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 96 components and 0.171159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061680Jy  sigma=1.164901
! Fit after  self-cal, rms=0.061679Jy  sigma=1.164882
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211448 Jy
! Component: 100  -  total flux cleaned = 0.000265408 Jy
! Component: 150  -  total flux cleaned = 0.000329743 Jy
! Component: 200  -  total flux cleaned = 0.000378918 Jy
! Total flux subtracted in 200 components = 0.000378918 Jy
! Clean residual min=-0.002243 max=0.001828 Jy/beam
! Clean residual mean=-0.000028 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.171538 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 97 components and 0.171538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061679Jy  sigma=1.164892
! Fit after  self-cal, rms=0.061678Jy  sigma=1.164884
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.623 mas, bmaj=6.615 mas, bpa=-1.765 degrees
! Estimated noise=0.666349 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.623 x 6.615 at -1.765 degrees (North through East)
! Clean map  min=-0.0020665  max=0.13735 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.2 mas, bmaj=5.615 mas, bpa=0.5142 degrees
! Estimated noise=1.04824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106465 Jy
! Component: 100  -  total flux cleaned = 0.134693 Jy
! Component: 150  -  total flux cleaned = 0.147072 Jy
! Component: 200  -  total flux cleaned = 0.153523 Jy
! Total flux subtracted in 200 components = 0.153523 Jy
! Clean residual min=-0.005330 max=0.004756 Jy/beam
! Clean residual mean=-0.000016 rms=0.001394 Jy/beam
! Combined flux in latest and established models = 0.153523 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.153523 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.623 mas, bmaj=6.615 mas, bpa=-1.765 degrees
! Estimated noise=0.666349 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00564658 Jy
! Component: 100  -  total flux cleaned = 0.00906062 Jy
! Component: 150  -  total flux cleaned = 0.0112957 Jy
! Component: 200  -  total flux cleaned = 0.0126424 Jy
! Total flux subtracted in 200 components = 0.0126424 Jy
! Clean residual min=-0.002834 max=0.002372 Jy/beam
! Clean residual mean=-0.000017 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.166165 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 36 components and 0.166165 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.119 mas, bmaj=19.1 mas, bpa=-0.5247 degrees
! Estimated noise=0.910192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001708 Jy
! Component: 100  -  total flux cleaned = 0.00275307 Jy
! Component: 150  -  total flux cleaned = 0.00354341 Jy
! Component: 200  -  total flux cleaned = 0.0039651 Jy
! Total flux subtracted in 200 components = 0.0039651 Jy
! Clean residual min=-0.002249 max=0.001950 Jy/beam
! Clean residual mean=-0.000027 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.17013 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128837 Jy
! Component: 100  -  total flux cleaned = 0.000229838 Jy
! Component: 150  -  total flux cleaned = 0.000326826 Jy
! Component: 200  -  total flux cleaned = 0.000420492 Jy
! Total flux subtracted in 200 components = 0.000420492 Jy
! Clean residual min=-0.002242 max=0.001910 Jy/beam
! Clean residual mean=-0.000025 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.170551 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.170551 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.623 mas, bmaj=6.615 mas, bpa=-1.765 degrees
! Estimated noise=0.666349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013006 Jy
! Component: 100  -  total flux cleaned = -7.72931e-05 Jy
! Component: 150  -  total flux cleaned = 1.25547e-05 Jy
! Component: 200  -  total flux cleaned = 0.000132961 Jy
! Total flux subtracted in 200 components = 0.000132961 Jy
! Clean residual min=-0.002494 max=0.002309 Jy/beam
! Clean residual mean=-0.000013 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.170684 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 65 components and 0.170684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061762Jy  sigma=1.166325
! Fit after  self-cal, rms=0.061764Jy  sigma=1.166064
wmodel /scr/pima/bg219a_uvs/J2357-2451_S_map.mod
! Writing 65 model components to file: /scr/pima/bg219a_uvs/J2357-2451_S_map.mod
wobs /scr/pima/bg219a_uvs/J2357-2451_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J2357-2451_S_uvs.fits
wwins /scr/pima/bg219a_uvs/J2357-2451_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219a_uvs/J2357-2451_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234558 Jy
! Component: 100  -  total flux cleaned = -0.000624251 Jy
! Component: 150  -  total flux cleaned = -0.000805575 Jy
! Component: 200  -  total flux cleaned = -0.000874271 Jy
! Component: 250  -  total flux cleaned = -0.000938693 Jy
! Component: 300  -  total flux cleaned = -0.00106216 Jy
! Component: 350  -  total flux cleaned = -0.00109153 Jy
! Component: 400  -  total flux cleaned = -0.0011491 Jy
! Component: 450  -  total flux cleaned = -0.00123235 Jy
! Component: 500  -  total flux cleaned = -0.00123272 Jy
! Component: 550  -  total flux cleaned = -0.00123327 Jy
! Component: 600  -  total flux cleaned = -0.00123405 Jy
! Component: 650  -  total flux cleaned = -0.00123462 Jy
! Component: 700  -  total flux cleaned = -0.00123467 Jy
! Component: 750  -  total flux cleaned = -0.00125794 Jy
! Component: 800  -  total flux cleaned = -0.00125807 Jy
! Component: 850  -  total flux cleaned = -0.00121432 Jy
! Component: 900  -  total flux cleaned = -0.0010846 Jy
! Component: 950  -  total flux cleaned = -0.00104298 Jy
! Component: 1000  -  total flux cleaned = -0.00104352 Jy
! Component: 1050  -  total flux cleaned = -0.00102288 Jy
! Component: 1100  -  total flux cleaned = -0.000983024 Jy
! Component: 1150  -  total flux cleaned = -0.00100218 Jy
! Component: 1200  -  total flux cleaned = -0.00100187 Jy
! Component: 1250  -  total flux cleaned = -0.00102129 Jy
! Component: 1300  -  total flux cleaned = -0.00104009 Jy
! Component: 1350  -  total flux cleaned = -0.00116849 Jy
! Component: 1400  -  total flux cleaned = -0.00120405 Jy
! Component: 1450  -  total flux cleaned = -0.00113262 Jy
! Component: 1500  -  total flux cleaned = -0.0011326 Jy
! Component: 1550  -  total flux cleaned = -0.00111505 Jy
! Component: 1600  -  total flux cleaned = -0.00109753 Jy
! Component: 1650  -  total flux cleaned = -0.00109744 Jy
! Component: 1700  -  total flux cleaned = -0.00119896 Jy
! Component: 1750  -  total flux cleaned = -0.00126609 Jy
! Component: 1800  -  total flux cleaned = -0.00136578 Jy
! Component: 1850  -  total flux cleaned = -0.00141513 Jy
! Component: 1900  -  total flux cleaned = -0.00149693 Jy
! Component: 1950  -  total flux cleaned = -0.0015782 Jy
! Component: 2000  -  total flux cleaned = -0.00165895 Jy
! Component: 2050  -  total flux cleaned = -0.00175509 Jy
! Component: 2100  -  total flux cleaned = -0.00185077 Jy
! Component: 2150  -  total flux cleaned = -0.00189826 Jy
! Component: 2200  -  total flux cleaned = -0.00196139 Jy
! Component: 2250  -  total flux cleaned = -0.00200846 Jy
! Component: 2300  -  total flux cleaned = -0.00207094 Jy
! Component: 2350  -  total flux cleaned = -0.00210209 Jy
! Component: 2400  -  total flux cleaned = -0.00213312 Jy
! Component: 2450  -  total flux cleaned = -0.00213313 Jy
! Component: 2500  -  total flux cleaned = -0.00214854 Jy
! Component: 2550  -  total flux cleaned = -0.00217934 Jy
! Component: 2600  -  total flux cleaned = -0.00219474 Jy
! Component: 2650  -  total flux cleaned = -0.00222529 Jy
! Component: 2700  -  total flux cleaned = -0.00224048 Jy
! Component: 2750  -  total flux cleaned = -0.00227083 Jy
! Component: 2800  -  total flux cleaned = -0.00228603 Jy
! Component: 2850  -  total flux cleaned = -0.0023162 Jy
! Component: 2900  -  total flux cleaned = -0.0023161 Jy
! Component: 2950  -  total flux cleaned = -0.00234627 Jy
! Component: 3000  -  total flux cleaned = -0.00239138 Jy
! Component: 3050  -  total flux cleaned = -0.0024214 Jy
! Component: 3100  -  total flux cleaned = -0.00246631 Jy
! Component: 3150  -  total flux cleaned = -0.00249646 Jy
! Component: 3200  -  total flux cleaned = -0.00249642 Jy
! Component: 3250  -  total flux cleaned = -0.00252655 Jy
! Component: 3300  -  total flux cleaned = -0.00251147 Jy
! Component: 3350  -  total flux cleaned = -0.00252648 Jy
! Component: 3400  -  total flux cleaned = -0.00251124 Jy
! Component: 3450  -  total flux cleaned = -0.00257202 Jy
! Component: 3500  -  total flux cleaned = -0.00254145 Jy
! Component: 3550  -  total flux cleaned = -0.00257211 Jy
! Component: 3600  -  total flux cleaned = -0.0026182 Jy
! Component: 3650  -  total flux cleaned = -0.00263364 Jy
! Component: 3700  -  total flux cleaned = -0.0026802 Jy
! Component: 3750  -  total flux cleaned = -0.00271133 Jy
! Component: 3800  -  total flux cleaned = -0.00274265 Jy
! Component: 3850  -  total flux cleaned = -0.00275835 Jy
! Component: 3900  -  total flux cleaned = -0.00277417 Jy
! Component: 3950  -  total flux cleaned = -0.00280603 Jy
! Component: 4000  -  total flux cleaned = -0.00280602 Jy
! Component: 4050  -  total flux cleaned = -0.00280595 Jy
! Total flux subtracted in 4096 components = -0.00283838 Jy
! Clean residual min=-0.001005 max=0.000898 Jy/beam
! Clean residual mean=-0.000006 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.167845 Jy
keep
! Adding 224 model components to the UV plane model.
! The established model now contains 289 components and 0.167845 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J2357-2451_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.623 x 6.615 at -1.765 degrees (North through East)
! Clean map  min=-0.0018884  max=0.13574 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2357-2451_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.135736 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000257371 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.568835 0.568835 1.13767 2.27534 4.55068 9.10135 18.2027 36.4054 72.8108
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.135 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  527.394 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2357-2451_S_uvs.log closed on Wed Apr  6 23:06:03 2016