! Started logfile: /scr/pima/bg219a_uvs/J2353-2743_S_dfm.log on Fri May 20 00:24:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2353-2743_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2353-2743_S_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2353-2743
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2353-2743_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002184Jy  sigma=19.698534
! Fit after  self-cal, rms=0.945130Jy  sigma=18.593462
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.113 mas, bmaj=5.777 mas, bpa=0.3512 degrees
! Estimated noise=1.12925 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0448034 Jy
! Component: 100  -  total flux cleaned = 0.0546764 Jy
! Total flux subtracted in 100 components = 0.0546764 Jy
! Clean residual min=-0.005865 max=0.006343 Jy/beam
! Clean residual mean=-0.000022 rms=0.001630 Jy/beam
! Combined flux in latest and established models = 0.0546764 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0546764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064471Jy  sigma=1.189976
! Fit after  self-cal, rms=0.063377Jy  sigma=1.172544
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.603 mas, bmaj=6.659 mas, bpa=-2.088 degrees
! Estimated noise=0.67971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00376324 Jy
! Component: 100  -  total flux cleaned = 0.00460485 Jy
! Component: 150  -  total flux cleaned = 0.00469082 Jy
! Component: 200  -  total flux cleaned = 0.00472115 Jy
! Total flux subtracted in 200 components = 0.00472115 Jy
! Clean residual min=-0.003173 max=0.003672 Jy/beam
! Clean residual mean=0.000007 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.0593975 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.0593975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063152Jy  sigma=1.168762
! Fit after  self-cal, rms=0.063115Jy  sigma=1.168185
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.603 x 6.659 at -2.088 degrees (North through East)
! Clean map  min=-0.0030614  max=0.057881 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.06     NL        1.00     OV        1.04     
!   PT        1.07     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.06     NL        0.96     OV        1.04     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.05     MK        1.02     NL        0.94     OV        1.04     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.96     NL        0.88     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.063115Jy  sigma=1.168185
! Fit after  self-cal, rms=0.062477Jy  sigma=1.165136
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.601 mas, bmaj=6.634 mas, bpa=-1.802 degrees
! Estimated noise=0.675257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.56789e-05 Jy
! Component: 100  -  total flux cleaned = 0.000129399 Jy
! Component: 150  -  total flux cleaned = 0.000176071 Jy
! Component: 200  -  total flux cleaned = 0.000203777 Jy
! Total flux subtracted in 200 components = 0.000203777 Jy
! Clean residual min=-0.002760 max=0.003216 Jy/beam
! Clean residual mean=-0.000005 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.0596013 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.0596013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062464Jy  sigma=1.165010
! Fit after  self-cal, rms=0.062464Jy  sigma=1.164696
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062464Jy  sigma=1.164696
! Fit after  self-cal, rms=0.062792Jy  sigma=1.162143
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.601 mas, bmaj=6.634 mas, bpa=-1.551 degrees
! Estimated noise=0.677859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155653 Jy
! Component: 100  -  total flux cleaned = 0.000224662 Jy
! Component: 150  -  total flux cleaned = 0.000238987 Jy
! Component: 200  -  total flux cleaned = 0.000227172 Jy
! Total flux subtracted in 200 components = 0.000227172 Jy
! Clean residual min=-0.002777 max=0.003135 Jy/beam
! Clean residual mean=-0.000010 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.0598285 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 24 components and 0.0598285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062781Jy  sigma=1.162033
! Fit after  self-cal, rms=0.062777Jy  sigma=1.160942
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133775 Jy
! Component: 100  -  total flux cleaned = 0.000163357 Jy
! Component: 150  -  total flux cleaned = 0.000163699 Jy
! Component: 200  -  total flux cleaned = 0.000153768 Jy
! Total flux subtracted in 200 components = 0.000153768 Jy
! Clean residual min=-0.002772 max=0.003032 Jy/beam
! Clean residual mean=-0.000009 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.0599822 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.0599822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062770Jy  sigma=1.160871
! Fit after  self-cal, rms=0.062770Jy  sigma=1.160849
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062770Jy  sigma=1.160849
! Fit after  self-cal, rms=0.062882Jy  sigma=1.160616
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.597 mas, bmaj=6.637 mas, bpa=-1.472 degrees
! Estimated noise=0.677416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121267 Jy
! Component: 100  -  total flux cleaned = 0.000122602 Jy
! Component: 150  -  total flux cleaned = 0.000122074 Jy
! Component: 200  -  total flux cleaned = 0.000121853 Jy
! Total flux subtracted in 200 components = 0.000121853 Jy
! Clean residual min=-0.002754 max=0.003001 Jy/beam
! Clean residual mean=-0.000010 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.0601041 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 31 components and 0.0601041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062875Jy  sigma=1.160540
! Fit after  self-cal, rms=0.062893Jy  sigma=1.160492
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.83668e-05 Jy
! Component: 100  -  total flux cleaned = 4.74636e-05 Jy
! Component: 150  -  total flux cleaned = 3.73606e-05 Jy
! Component: 200  -  total flux cleaned = 2.83506e-05 Jy
! Total flux subtracted in 200 components = 2.83506e-05 Jy
! Clean residual min=-0.002740 max=0.003003 Jy/beam
! Clean residual mean=-0.000009 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.0601324 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 32 components and 0.0601324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062888Jy  sigma=1.160449
! Fit after  self-cal, rms=0.062889Jy  sigma=1.160438
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062889Jy  sigma=1.160438
! Fit after  self-cal, rms=0.062887Jy  sigma=1.160412
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.026 mas, bmaj=19.33 mas, bpa=0.1285 degrees
! Estimated noise=0.93822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000681509 Jy
! Component: 100  -  total flux cleaned = 0.000684985 Jy
! Component: 150  -  total flux cleaned = 0.000686589 Jy
! Component: 200  -  total flux cleaned = 0.000685303 Jy
! Total flux subtracted in 200 components = 0.000685303 Jy
! Clean residual min=-0.003031 max=0.003512 Jy/beam
! Clean residual mean=-0.000016 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.0608177 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 35 components and 0.0608177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062911Jy  sigma=1.160769
! Fit after  self-cal, rms=0.062890Jy  sigma=1.160512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000104868 Jy
! Component: 100  -  total flux cleaned = 0.000103196 Jy
! Component: 150  -  total flux cleaned = 0.000101485 Jy
! Component: 200  -  total flux cleaned = 8.56615e-05 Jy
! Total flux subtracted in 200 components = 8.56615e-05 Jy
! Clean residual min=-0.003010 max=0.003477 Jy/beam
! Clean residual mean=-0.000015 rms=0.000995 Jy/beam
! Combined flux in latest and established models = 0.0609034 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 36 components and 0.0609034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062922Jy  sigma=1.161070
! Fit after  self-cal, rms=0.062900Jy  sigma=1.160909
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.594 mas, bmaj=6.639 mas, bpa=-1.425 degrees
! Estimated noise=0.677388 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.594 x 6.639 at -1.425 degrees (North through East)
! Clean map  min=-0.0024785  max=0.057515 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.099 mas, bmaj=5.784 mas, bpa=1.028 degrees
! Estimated noise=1.11325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0451453 Jy
! Component: 100  -  total flux cleaned = 0.055931 Jy
! Component: 150  -  total flux cleaned = 0.0575985 Jy
! Component: 200  -  total flux cleaned = 0.0583403 Jy
! Total flux subtracted in 200 components = 0.0583403 Jy
! Clean residual min=-0.004928 max=0.005987 Jy/beam
! Clean residual mean=-0.000022 rms=0.001400 Jy/beam
! Combined flux in latest and established models = 0.0583403 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0583403 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.594 mas, bmaj=6.639 mas, bpa=-1.425 degrees
! Estimated noise=0.677388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142511 Jy
! Component: 100  -  total flux cleaned = 0.00185135 Jy
! Component: 150  -  total flux cleaned = 0.00189263 Jy
! Component: 200  -  total flux cleaned = 0.00192773 Jy
! Total flux subtracted in 200 components = 0.00192773 Jy
! Clean residual min=-0.002847 max=0.003037 Jy/beam
! Clean residual mean=-0.000010 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.060268 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 24 components and 0.060268 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.026 mas, bmaj=19.33 mas, bpa=0.1285 degrees
! Estimated noise=0.93822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000698105 Jy
! Component: 100  -  total flux cleaned = 0.000696532 Jy
! Component: 150  -  total flux cleaned = 0.000695206 Jy
! Component: 200  -  total flux cleaned = 0.000693574 Jy
! Total flux subtracted in 200 components = 0.000693574 Jy
! Clean residual min=-0.002998 max=0.003505 Jy/beam
! Clean residual mean=-0.000014 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.0609616 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.73731e-05 Jy
! Component: 100  -  total flux cleaned = -1.7281e-05 Jy
! Component: 150  -  total flux cleaned = -2.86605e-05 Jy
! Component: 200  -  total flux cleaned = -2.88632e-05 Jy
! Total flux subtracted in 200 components = -2.88632e-05 Jy
! Clean residual min=-0.002992 max=0.003486 Jy/beam
! Clean residual mean=-0.000015 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.0609327 Jy
! Adding 6 model components to the UV plane model.
! The established model now contains 26 components and 0.0609327 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.594 mas, bmaj=6.639 mas, bpa=-1.425 degrees
! Estimated noise=0.677388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000637998 Jy
! Component: 100  -  total flux cleaned = -0.000572216 Jy
! Component: 150  -  total flux cleaned = -0.000547599 Jy
! Component: 200  -  total flux cleaned = -0.000548563 Jy
! Total flux subtracted in 200 components = -0.000548563 Jy
! Clean residual min=-0.002816 max=0.003058 Jy/beam
! Clean residual mean=-0.000009 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.0603842 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 40 components and 0.0603842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062876Jy  sigma=1.160559
! Fit after  self-cal, rms=0.062881Jy  sigma=1.160473
wmodel /J2353-2743_S_map.mod
! wmodel: Unable to open new model file: /J2353-2743_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2353-2743_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.594 x 6.639 at -1.425 degrees (North through East)
! Clean map  min=-0.0026159  max=0.057417 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2353-2743_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0574167 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000729193 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.81 3.81 7.62001 15.24 30.48 60.9601
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  78.74 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2353-2743_S_dfm.log closed on Fri May 20 00:24:29 2016