! Started logfile: /scr/pima/bg219a_uvs/J2344+8226_S_uvs.log on Wed Apr  6 23:05:30 2016
obs /scr/pima/bg219a_uvs/J2344+8226_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2344+8226_S_uva.fits
! AN table 1: 61 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.79235 visibilities/baseline/integration-bin.
! Found source: J2344+8226
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 4060 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J2344+8226_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.256207Jy  sigma=22.718621
! Fit after  self-cal, rms=0.753666Jy  sigma=14.311352
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.415 mas, bmaj=10.12 mas, bpa=-20.6 degrees
! Estimated noise=0.901142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.265417 Jy
! Component: 100  -  total flux cleaned = 0.432383 Jy
! Total flux subtracted in 100 components = 0.432383 Jy
! Clean residual min=-0.060011 max=0.098518 Jy/beam
! Clean residual mean=-0.000161 rms=0.021056 Jy/beam
! Combined flux in latest and established models = 0.432383 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.432383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.583218Jy  sigma=8.022850
! Fit after  self-cal, rms=0.582511Jy  sigma=8.011117
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=10.98 mas, bpa=-22.14 degrees
! Estimated noise=0.626658 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.260604 Jy
! Component: 100  -  total flux cleaned = 0.43471 Jy
! Component: 150  -  total flux cleaned = 0.562267 Jy
! Component: 200  -  total flux cleaned = 0.661653 Jy
! Total flux subtracted in 200 components = 0.661653 Jy
! Clean residual min=-0.062923 max=0.085179 Jy/beam
! Clean residual mean=-0.000253 rms=0.025689 Jy/beam
! Combined flux in latest and established models = 1.09404 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 80 components and 1.09404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.318509Jy  sigma=4.058528
! Fit after  self-cal, rms=0.317330Jy  sigma=4.046114
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.821 x 10.98 at -22.14 degrees (North through East)
! Clean map  min=-0.062599  max=0.50974 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.317330Jy  sigma=4.046114
! Fit after  self-cal, rms=0.317330Jy  sigma=4.046114
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=10.98 mas, bpa=-22.14 degrees
! Estimated noise=0.626658 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0794127 Jy
! Component: 100  -  total flux cleaned = 0.143284 Jy
! Component: 150  -  total flux cleaned = 0.194874 Jy
! Component: 200  -  total flux cleaned = 0.236581 Jy
! Total flux subtracted in 200 components = 0.236581 Jy
! Clean residual min=-0.057949 max=0.070390 Jy/beam
! Clean residual mean=-0.000257 rms=0.020960 Jy/beam
! Combined flux in latest and established models = 1.33062 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 94 components and 1.33062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.256873Jy  sigma=3.438840
! Fit after  self-cal, rms=0.256497Jy  sigma=3.435688
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.256497Jy  sigma=3.435688
! Fit after  self-cal, rms=0.256497Jy  sigma=3.435688
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=10.98 mas, bpa=-22.14 degrees
! Estimated noise=0.626658 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342429 Jy
! Component: 100  -  total flux cleaned = 0.0618354 Jy
! Component: 150  -  total flux cleaned = 0.0817325 Jy
! Component: 200  -  total flux cleaned = 0.0919315 Jy
! Total flux subtracted in 200 components = 0.0919315 Jy
! Clean residual min=-0.058326 max=0.071840 Jy/beam
! Clean residual mean=-0.000259 rms=0.019965 Jy/beam
! Combined flux in latest and established models = 1.42255 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 97 components and 1.42255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.239491Jy  sigma=3.353983
! Fit after  self-cal, rms=0.239351Jy  sigma=3.352174
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00735523 Jy
! Component: 100  -  total flux cleaned = 0.013445 Jy
! Component: 150  -  total flux cleaned = 0.0179124 Jy
! Component: 200  -  total flux cleaned = 0.0227364 Jy
! Total flux subtracted in 200 components = 0.0227364 Jy
! Clean residual min=-0.057782 max=0.071505 Jy/beam
! Clean residual mean=-0.000259 rms=0.019587 Jy/beam
! Combined flux in latest and established models = 1.44529 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 99 components and 1.44529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.233897Jy  sigma=3.299911
! Fit after  self-cal, rms=0.233804Jy  sigma=3.298176
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.233804Jy  sigma=3.298176
! Fit after  self-cal, rms=0.233804Jy  sigma=3.298176
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=10.98 mas, bpa=-22.14 degrees
! Estimated noise=0.626658 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00469483 Jy
! Component: 100  -  total flux cleaned = 0.00901622 Jy
! Component: 150  -  total flux cleaned = 0.0130771 Jy
! Component: 200  -  total flux cleaned = 0.0164452 Jy
! Total flux subtracted in 200 components = 0.0164452 Jy
! Clean residual min=-0.057149 max=0.071270 Jy/beam
! Clean residual mean=-0.000260 rms=0.019342 Jy/beam
! Combined flux in latest and established models = 1.46173 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 102 components and 1.46173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230042Jy  sigma=3.266515
! Fit after  self-cal, rms=0.229978Jy  sigma=3.265149
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00397212 Jy
! Component: 100  -  total flux cleaned = 0.00703856 Jy
! Component: 150  -  total flux cleaned = 0.00994477 Jy
! Component: 200  -  total flux cleaned = 0.0123172 Jy
! Total flux subtracted in 200 components = 0.0123172 Jy
! Clean residual min=-0.056683 max=0.071537 Jy/beam
! Clean residual mean=-0.000261 rms=0.019176 Jy/beam
! Combined flux in latest and established models = 1.47405 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 1.47405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227310Jy  sigma=3.245659
! Fit after  self-cal, rms=0.227274Jy  sigma=3.244500
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227274Jy  sigma=3.244500
! Fit after  self-cal, rms=0.227274Jy  sigma=3.244500
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.142 mas, bmaj=18.42 mas, bpa=-29.17 degrees
! Estimated noise=0.957287 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0522225 Jy
! Component: 100  -  total flux cleaned = 0.0711226 Jy
! Component: 150  -  total flux cleaned = 0.0765917 Jy
! Component: 200  -  total flux cleaned = 0.0805603 Jy
! Total flux subtracted in 200 components = 0.0805603 Jy
! Clean residual min=-0.109444 max=0.157554 Jy/beam
! Clean residual mean=-0.000688 rms=0.044886 Jy/beam
! Combined flux in latest and established models = 1.55461 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 110 components and 1.55461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223653Jy  sigma=3.507648
! Fit after  self-cal, rms=0.222230Jy  sigma=3.458473
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00432605 Jy
! Component: 100  -  total flux cleaned = 0.00801959 Jy
! Component: 150  -  total flux cleaned = 0.0113706 Jy
! Component: 200  -  total flux cleaned = 0.0144768 Jy
! Total flux subtracted in 200 components = 0.0144768 Jy
! Clean residual min=-0.106035 max=0.153003 Jy/beam
! Clean residual mean=-0.000684 rms=0.043763 Jy/beam
! Combined flux in latest and established models = 1.56909 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 113 components and 1.56909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.227440Jy  sigma=3.675991
! Fit after  self-cal, rms=0.226470Jy  sigma=3.638444
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=10.98 mas, bpa=-22.14 degrees
! Estimated noise=0.626658 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.821 x 10.98 at -22.14 degrees (North through East)
! Clean map  min=-0.070259  max=0.53283 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.226470Jy  sigma=3.638444
! Fit after  self-cal, rms=0.226470Jy  sigma=3.638444
! Inverting map and beam 
! Estimated beam: bmin=2.821 mas, bmaj=10.98 mas, bpa=-22.14 degrees
! Estimated noise=0.626658 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0298699 Jy
! Component: 100  -  total flux cleaned = -0.0397868 Jy
! Component: 150  -  total flux cleaned = -0.0436412 Jy
! Component: 200  -  total flux cleaned = -0.0454271 Jy
! Total flux subtracted in 200 components = -0.0454271 Jy
! Clean residual min=-0.055400 max=0.078561 Jy/beam
! Clean residual mean=-0.000261 rms=0.018536 Jy/beam
! Combined flux in latest and established models = 1.52366 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 124 components and 1.52366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.221563Jy  sigma=3.345035
! Fit after  self-cal, rms=0.220617Jy  sigma=3.317551
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00241049 Jy
! Component: 100  -  total flux cleaned = -0.00347036 Jy
! Component: 150  -  total flux cleaned = -0.00472751 Jy
! Component: 200  -  total flux cleaned = -0.00437015 Jy
! Total flux subtracted in 200 components = -0.00437015 Jy
! Clean residual min=-0.053661 max=0.077181 Jy/beam
! Clean residual mean=-0.000262 rms=0.018458 Jy/beam
! Combined flux in latest and established models = 1.51929 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 131 components and 1.51929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219001Jy  sigma=3.239833
! Fit after  self-cal, rms=0.218598Jy  sigma=3.225991
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.218598Jy  sigma=3.225991
! Fit after  self-cal, rms=0.217891Jy  sigma=3.222304
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.415 mas, bmaj=10.11 mas, bpa=-20.6 degrees
! Estimated noise=0.900443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.26054 Jy
! Component: 100  -  total flux cleaned = 0.431006 Jy
! Component: 150  -  total flux cleaned = 0.56116 Jy
! Component: 200  -  total flux cleaned = 0.662582 Jy
! Total flux subtracted in 200 components = 0.662582 Jy
! Clean residual min=-0.053112 max=0.068805 Jy/beam
! Clean residual mean=-0.000154 rms=0.016618 Jy/beam
! Combined flux in latest and established models = 0.662582 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.662582 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.82 mas, bmaj=10.97 mas, bpa=-22.14 degrees
! Estimated noise=0.626346 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.185836 Jy
! Component: 100  -  total flux cleaned = 0.320879 Jy
! Component: 150  -  total flux cleaned = 0.42612 Jy
! Component: 200  -  total flux cleaned = 0.509627 Jy
! Total flux subtracted in 200 components = 0.509627 Jy
! Clean residual min=-0.060976 max=0.083285 Jy/beam
! Clean residual mean=-0.000242 rms=0.023844 Jy/beam
! Combined flux in latest and established models = 1.17221 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 98 components and 1.17221 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.142 mas, bmaj=18.41 mas, bpa=-29.18 degrees
! Estimated noise=0.957146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.166447 Jy
! Component: 100  -  total flux cleaned = 0.267216 Jy
! Component: 150  -  total flux cleaned = 0.33113 Jy
! Component: 200  -  total flux cleaned = 0.371682 Jy
! Total flux subtracted in 200 components = 0.371682 Jy
! Clean residual min=-0.110180 max=0.155173 Jy/beam
! Clean residual mean=-0.000655 rms=0.043893 Jy/beam
! Combined flux in latest and established models = 1.54389 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232268 Jy
! Component: 100  -  total flux cleaned = 0.0281123 Jy
! Component: 150  -  total flux cleaned = 0.0311384 Jy
! Component: 200  -  total flux cleaned = 0.0332851 Jy
! Total flux subtracted in 200 components = 0.0332851 Jy
! Clean residual min=-0.108115 max=0.153019 Jy/beam
! Clean residual mean=-0.000652 rms=0.042751 Jy/beam
! Combined flux in latest and established models = 1.57718 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 105 components and 1.57718 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.82 mas, bmaj=10.97 mas, bpa=-22.14 degrees
! Estimated noise=0.626346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0514073 Jy
! Component: 100  -  total flux cleaned = -0.0573539 Jy
! Component: 150  -  total flux cleaned = -0.0632836 Jy
! Component: 200  -  total flux cleaned = -0.0665589 Jy
! Total flux subtracted in 200 components = -0.0665589 Jy
! Clean residual min=-0.060015 max=0.075320 Jy/beam
! Clean residual mean=-0.000249 rms=0.018983 Jy/beam
! Combined flux in latest and established models = 1.51062 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 112 components and 1.51062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.226753Jy  sigma=3.453521
! Fit after  self-cal, rms=0.225307Jy  sigma=3.395255
wmodel /scr/pima/bg219a_uvs/J2344+8226_S_map.mod
! Writing 112 model components to file: /scr/pima/bg219a_uvs/J2344+8226_S_map.mod
wobs /scr/pima/bg219a_uvs/J2344+8226_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J2344+8226_S_uvs.fits
wwins /scr/pima/bg219a_uvs/J2344+8226_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J2344+8226_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0324092 Jy
! Component: 100  -  total flux cleaned = 0.0588716 Jy
! Component: 150  -  total flux cleaned = 0.072088 Jy
! Component: 200  -  total flux cleaned = 0.0852677 Jy
! Component: 250  -  total flux cleaned = 0.0966451 Jy
! Component: 300  -  total flux cleaned = 0.10646 Jy
! Component: 350  -  total flux cleaned = 0.115615 Jy
! Component: 400  -  total flux cleaned = 0.122047 Jy
! Component: 450  -  total flux cleaned = 0.127383 Jy
! Component: 500  -  total flux cleaned = 0.131763 Jy
! Component: 550  -  total flux cleaned = 0.136505 Jy
! Component: 600  -  total flux cleaned = 0.142685 Jy
! Component: 650  -  total flux cleaned = 0.148521 Jy
! Component: 700  -  total flux cleaned = 0.154548 Jy
! Component: 750  -  total flux cleaned = 0.159786 Jy
! Component: 800  -  total flux cleaned = 0.165712 Jy
! Component: 850  -  total flux cleaned = 0.170488 Jy
! Component: 900  -  total flux cleaned = 0.173806 Jy
! Component: 950  -  total flux cleaned = 0.177004 Jy
! Component: 1000  -  total flux cleaned = 0.180818 Jy
! Component: 1050  -  total flux cleaned = 0.18337 Jy
! Component: 1100  -  total flux cleaned = 0.185476 Jy
! Component: 1150  -  total flux cleaned = 0.188175 Jy
! Component: 1200  -  total flux cleaned = 0.190437 Jy
! Component: 1250  -  total flux cleaned = 0.191991 Jy
! Component: 1300  -  total flux cleaned = 0.193502 Jy
! Component: 1350  -  total flux cleaned = 0.19555 Jy
! Component: 1400  -  total flux cleaned = 0.196405 Jy
! Component: 1450  -  total flux cleaned = 0.198299 Jy
! Component: 1500  -  total flux cleaned = 0.199606 Jy
! Component: 1550  -  total flux cleaned = 0.200124 Jy
! Component: 1600  -  total flux cleaned = 0.2016 Jy
! Component: 1650  -  total flux cleaned = 0.202314 Jy
! Component: 1700  -  total flux cleaned = 0.203699 Jy
! Component: 1750  -  total flux cleaned = 0.204815 Jy
! Component: 1800  -  total flux cleaned = 0.205902 Jy
! Component: 1850  -  total flux cleaned = 0.206749 Jy
! Component: 1900  -  total flux cleaned = 0.207777 Jy
! Component: 1950  -  total flux cleaned = 0.207981 Jy
! Component: 2000  -  total flux cleaned = 0.209152 Jy
! Component: 2050  -  total flux cleaned = 0.210288 Jy
! Component: 2100  -  total flux cleaned = 0.210843 Jy
! Component: 2150  -  total flux cleaned = 0.211562 Jy
! Component: 2200  -  total flux cleaned = 0.212261 Jy
! Component: 2250  -  total flux cleaned = 0.212773 Jy
! Component: 2300  -  total flux cleaned = 0.213275 Jy
! Component: 2350  -  total flux cleaned = 0.213765 Jy
! Component: 2400  -  total flux cleaned = 0.214407 Jy
! Component: 2450  -  total flux cleaned = 0.21519 Jy
! Component: 2500  -  total flux cleaned = 0.216565 Jy
! Component: 2550  -  total flux cleaned = 0.216712 Jy
! Component: 2600  -  total flux cleaned = 0.217303 Jy
! Component: 2650  -  total flux cleaned = 0.218171 Jy
! Component: 2700  -  total flux cleaned = 0.218876 Jy
! Component: 2750  -  total flux cleaned = 0.219432 Jy
! Component: 2800  -  total flux cleaned = 0.219976 Jy
! Component: 2850  -  total flux cleaned = 0.220777 Jy
! Component: 2900  -  total flux cleaned = 0.220781 Jy
! Component: 2950  -  total flux cleaned = 0.221554 Jy
! Component: 3000  -  total flux cleaned = 0.22206 Jy
! Component: 3050  -  total flux cleaned = 0.222556 Jy
! Component: 3100  -  total flux cleaned = 0.223166 Jy
! Component: 3150  -  total flux cleaned = 0.223288 Jy
! Component: 3200  -  total flux cleaned = 0.22388 Jy
! Component: 3250  -  total flux cleaned = 0.224575 Jy
! Component: 3300  -  total flux cleaned = 0.224917 Jy
! Component: 3350  -  total flux cleaned = 0.225144 Jy
! Component: 3400  -  total flux cleaned = 0.226135 Jy
! Component: 3450  -  total flux cleaned = 0.226675 Jy
! Component: 3500  -  total flux cleaned = 0.227422 Jy
! Component: 3550  -  total flux cleaned = 0.228369 Jy
! Component: 3600  -  total flux cleaned = 0.228888 Jy
! Component: 3650  -  total flux cleaned = 0.229706 Jy
! Component: 3700  -  total flux cleaned = 0.230514 Jy
! Component: 3750  -  total flux cleaned = 0.231411 Jy
! Component: 3800  -  total flux cleaned = 0.232394 Jy
! Component: 3850  -  total flux cleaned = 0.232976 Jy
! Component: 3900  -  total flux cleaned = 0.233934 Jy
! Component: 3950  -  total flux cleaned = 0.234975 Jy
! Component: 4000  -  total flux cleaned = 0.23563 Jy
! Component: 4050  -  total flux cleaned = 0.236832 Jy
! Total flux subtracted in 4096 components = 0.237745 Jy
! Clean residual min=-0.004898 max=0.004729 Jy/beam
! Clean residual mean=-0.000115 rms=0.002290 Jy/beam
! Combined flux in latest and established models = 1.74836 Jy
keep
! Adding 597 model components to the UV plane model.
! The established model now contains 709 components and 1.74836 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J2344+8226_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.82 x 10.97 at -22.14 degrees (North through East)
! Clean map  min=-0.020917  max=0.49337 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2344+8226_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.493371 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00237159 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.44207 1.44207 2.88414 5.76828 11.5366 23.0731 46.1463 92.2925
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0071 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.493 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  208.034 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2344+8226_S_uvs.log closed on Wed Apr  6 23:05:34 2016