! Started logfile: /scr/pima/bg219a_uvs/J2340+3319_S_dfm.log on Fri May 20 00:23:43 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J2340+3319_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J2340+3319_S_uva.fits ! AN table 1: 28 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J2340+3319 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1344 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2340+3319_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999935Jy sigma=26.595102 ! Fit after self-cal, rms=0.818566Jy sigma=21.607583 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=5.26 mas, bpa=-1.917 degrees ! Estimated noise=1.15402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139995 Jy ! Component: 100 - total flux cleaned = 0.181001 Jy ! Total flux subtracted in 100 components = 0.181001 Jy ! Clean residual min=-0.010128 max=0.015882 Jy/beam ! Clean residual mean=0.000021 rms=0.003087 Jy/beam ! Combined flux in latest and established models = 0.181001 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.181001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054931Jy sigma=1.388785 ! Fit after self-cal, rms=0.054908Jy sigma=1.387341 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.675 mas, bmaj=6.573 mas, bpa=-5.557 degrees ! Estimated noise=0.799874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194414 Jy ! Component: 100 - total flux cleaned = 0.0281813 Jy ! Component: 150 - total flux cleaned = 0.03233 Jy ! Component: 200 - total flux cleaned = 0.0344207 Jy ! Total flux subtracted in 200 components = 0.0344207 Jy ! Clean residual min=-0.004202 max=0.004622 Jy/beam ! Clean residual mean=-0.000006 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.215422 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.215422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049054Jy sigma=1.191360 ! Fit after self-cal, rms=0.049098Jy sigma=1.190935 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.675 x 6.573 at -5.557 degrees (North through East) ! Clean map min=-0.0040576 max=0.18332 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.96 MK 0.94 NL 0.98 OV 1.05 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 1.09 NL 0.99 OV 0.99 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.03 MK 1.03 NL 0.98 OV 0.99 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 0.96 NL 0.96 OV 1.02 ! PT 1.01 SC 1.01 ! ! ! Fit before self-cal, rms=0.049098Jy sigma=1.190935 ! Fit after self-cal, rms=0.048602Jy sigma=1.180297 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.676 mas, bmaj=6.56 mas, bpa=-5.568 degrees ! Estimated noise=0.796845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342156 Jy ! Component: 100 - total flux cleaned = 0.000510604 Jy ! Component: 150 - total flux cleaned = 0.000586874 Jy ! Component: 200 - total flux cleaned = 0.000657456 Jy ! Total flux subtracted in 200 components = 0.000657456 Jy ! Clean residual min=-0.003833 max=0.003901 Jy/beam ! Clean residual mean=-0.000004 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.21608 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.21608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048574Jy sigma=1.179626 ! Fit after self-cal, rms=0.048581Jy sigma=1.179526 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048581Jy sigma=1.179526 ! Fit after self-cal, rms=0.047913Jy sigma=1.166880 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=6.563 mas, bpa=-5.699 degrees ! Estimated noise=0.796315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245215 Jy ! Component: 100 - total flux cleaned = 0.000295848 Jy ! Component: 150 - total flux cleaned = 0.000342147 Jy ! Component: 200 - total flux cleaned = 0.000363952 Jy ! Total flux subtracted in 200 components = 0.000363952 Jy ! Clean residual min=-0.003445 max=0.003657 Jy/beam ! Clean residual mean=0.000001 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.216443 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.216443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047888Jy sigma=1.166358 ! Fit after self-cal, rms=0.047884Jy sigma=1.166289 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (58.5, 67). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275189 Jy ! Component: 100 - total flux cleaned = 0.0028084 Jy ! Component: 150 - total flux cleaned = 0.00284718 Jy ! Component: 200 - total flux cleaned = 0.00292607 Jy ! Total flux subtracted in 200 components = 0.00292607 Jy ! Clean residual min=-0.002875 max=0.002713 Jy/beam ! Clean residual mean=0.000001 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.21937 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.21937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047676Jy sigma=1.160921 ! Fit after self-cal, rms=0.047660Jy sigma=1.160664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047660Jy sigma=1.160664 ! Fit after self-cal, rms=0.047453Jy sigma=1.160477 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=6.56 mas, bpa=-5.75 degrees ! Estimated noise=0.793911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387187 Jy ! Component: 100 - total flux cleaned = 0.000323435 Jy ! Component: 150 - total flux cleaned = 0.000264269 Jy ! Component: 200 - total flux cleaned = 0.000315339 Jy ! Total flux subtracted in 200 components = 0.000315339 Jy ! Clean residual min=-0.002696 max=0.002703 Jy/beam ! Clean residual mean=0.000000 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.219685 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.219685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047413Jy sigma=1.159541 ! Fit after self-cal, rms=0.047409Jy sigma=1.159515 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.0891e-06 Jy ! Component: 100 - total flux cleaned = 6.46734e-05 Jy ! Component: 150 - total flux cleaned = 0.000126926 Jy ! Component: 200 - total flux cleaned = 0.000166295 Jy ! Total flux subtracted in 200 components = 0.000166295 Jy ! Clean residual min=-0.002645 max=0.002677 Jy/beam ! Clean residual mean=0.000000 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.219851 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.219851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047390Jy sigma=1.159086 ! Fit after self-cal, rms=0.047388Jy sigma=1.159073 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047388Jy sigma=1.159073 ! Fit after self-cal, rms=0.047412Jy sigma=1.159015 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.381 mas, bmaj=13.68 mas, bpa=-9.112 degrees ! Estimated noise=0.933794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00070559 Jy ! Component: 100 - total flux cleaned = 0.000770763 Jy ! Component: 150 - total flux cleaned = 0.000845503 Jy ! Component: 200 - total flux cleaned = 0.000909249 Jy ! Total flux subtracted in 200 components = 0.000909249 Jy ! Clean residual min=-0.002621 max=0.002320 Jy/beam ! Clean residual mean=-0.000000 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.22076 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.22076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047411Jy sigma=1.158957 ! Fit after self-cal, rms=0.047409Jy sigma=1.158927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136713 Jy ! Component: 100 - total flux cleaned = 0.000137233 Jy ! Component: 150 - total flux cleaned = 0.000137977 Jy ! Component: 200 - total flux cleaned = 0.000137854 Jy ! Total flux subtracted in 200 components = 0.000137854 Jy ! Clean residual min=-0.002530 max=0.002336 Jy/beam ! Clean residual mean=-0.000000 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.220898 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.220898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047410Jy sigma=1.158919 ! Fit after self-cal, rms=0.047409Jy sigma=1.158913 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=6.561 mas, bpa=-5.769 degrees ! Estimated noise=0.794157 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.669 x 6.561 at -5.769 degrees (North through East) ! Clean map min=-0.002516 max=0.18216 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=5.246 mas, bpa=-2.646 degrees ! Estimated noise=1.14283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138866 Jy ! Component: 100 - total flux cleaned = 0.180163 Jy ! Component: 150 - total flux cleaned = 0.196802 Jy ! Component: 200 - total flux cleaned = 0.20574 Jy ! Total flux subtracted in 200 components = 0.20574 Jy ! Clean residual min=-0.005861 max=0.005360 Jy/beam ! Clean residual mean=0.000010 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.20574 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.20574 Jy ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=6.561 mas, bpa=-5.769 degrees ! Estimated noise=0.794157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00594328 Jy ! Component: 100 - total flux cleaned = 0.00936952 Jy ! Component: 150 - total flux cleaned = 0.0112048 Jy ! Component: 200 - total flux cleaned = 0.0119188 Jy ! Total flux subtracted in 200 components = 0.0119188 Jy ! Clean residual min=-0.003179 max=0.002927 Jy/beam ! Clean residual mean=0.000001 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.217659 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.217659 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.381 mas, bmaj=13.68 mas, bpa=-9.112 degrees ! Estimated noise=0.933794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163604 Jy ! Component: 100 - total flux cleaned = 0.00245543 Jy ! Component: 150 - total flux cleaned = 0.0026821 Jy ! Component: 200 - total flux cleaned = 0.00276308 Jy ! Total flux subtracted in 200 components = 0.00276308 Jy ! Clean residual min=-0.002660 max=0.002517 Jy/beam ! Clean residual mean=-0.000001 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.220422 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.57398e-05 Jy ! Component: 100 - total flux cleaned = 0.0001238 Jy ! Component: 150 - total flux cleaned = 0.000194124 Jy ! Component: 200 - total flux cleaned = 0.000226942 Jy ! Total flux subtracted in 200 components = 0.000226942 Jy ! Clean residual min=-0.002575 max=0.002436 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.220649 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 0.220649 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=6.561 mas, bpa=-5.769 degrees ! Estimated noise=0.794157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201389 Jy ! Component: 100 - total flux cleaned = -0.00019762 Jy ! Component: 150 - total flux cleaned = -0.000120706 Jy ! Component: 200 - total flux cleaned = -8.67407e-05 Jy ! Total flux subtracted in 200 components = -8.67407e-05 Jy ! Clean residual min=-0.002762 max=0.002819 Jy/beam ! Clean residual mean=-0.000000 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.220562 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.220562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047449Jy sigma=1.159889 ! Fit after self-cal, rms=0.047444Jy sigma=1.159804 wmodel /J2340+3319_S_map.mod ! wmodel: Unable to open new model file: /J2340+3319_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J2340+3319_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.669 x 6.561 at -5.769 degrees (North through East) ! Clean map min=-0.0026426 max=0.18155 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2340+3319_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.181547 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00068203 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12703 1.12703 2.25406 4.50812 9.01625 18.0325 36.065 72.13 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.181 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 266.186 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J2340+3319_S_dfm.log closed on Fri May 20 00:23:45 2016