! Started logfile: /scr/pima/bg219a_uvs/J2339-2310_S_dfm.log on Fri May 20 00:23:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2339-2310_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2339-2310_S_uva.fits
! AN table 1: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2339-2310
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3480 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2339-2310_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999491Jy  sigma=20.500556
! Fit after  self-cal, rms=0.929633Jy  sigma=19.048383
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.157 mas, bmaj=5.476 mas, bpa=-0.1614 degrees
! Estimated noise=0.995722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0513354 Jy
! Component: 100  -  total flux cleaned = 0.0670643 Jy
! Total flux subtracted in 100 components = 0.0670643 Jy
! Clean residual min=-0.005924 max=0.007094 Jy/beam
! Clean residual mean=-0.000056 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 0.0670642 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0670642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066619Jy  sigma=1.280091
! Fit after  self-cal, rms=0.066258Jy  sigma=1.273436
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.644 mas, bmaj=6.725 mas, bpa=-1.396 degrees
! Estimated noise=0.604053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123086 Jy
! Component: 100  -  total flux cleaned = 0.0178416 Jy
! Component: 150  -  total flux cleaned = 0.0207698 Jy
! Component: 200  -  total flux cleaned = 0.0223524 Jy
! Total flux subtracted in 200 components = 0.0223524 Jy
! Clean residual min=-0.004625 max=0.005012 Jy/beam
! Clean residual mean=-0.000066 rms=0.001362 Jy/beam
! Combined flux in latest and established models = 0.0894166 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 39 components and 0.0894166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064399Jy  sigma=1.223329
! Fit after  self-cal, rms=0.064450Jy  sigma=1.222449
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.644 x 6.725 at -1.396 degrees (North through East)
! Clean map  min=-0.0042703  max=0.071608 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        1.10     OV        1.08     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.89     MK        1.00     NL        0.99     OV        1.09     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.02     NL        1.02     OV        1.09     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.10     NL        1.00     OV        1.02     
!   PT        0.92     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.064450Jy  sigma=1.222449
! Fit after  self-cal, rms=0.065294Jy  sigma=1.215655
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.68 mas, bmaj=6.787 mas, bpa=-1.278 degrees
! Estimated noise=0.602914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.5, 11.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00501145 Jy
! Component: 100  -  total flux cleaned = 0.00594943 Jy
! Component: 150  -  total flux cleaned = 0.00661632 Jy
! Component: 200  -  total flux cleaned = 0.0071802 Jy
! Total flux subtracted in 200 components = 0.0071802 Jy
! Clean residual min=-0.002756 max=0.002555 Jy/beam
! Clean residual mean=-0.000017 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.0965968 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 58 components and 0.0965968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064927Jy  sigma=1.207648
! Fit after  self-cal, rms=0.064914Jy  sigma=1.206645
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064914Jy  sigma=1.206645
! Fit after  self-cal, rms=0.064907Jy  sigma=1.203653
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.684 mas, bmaj=6.748 mas, bpa=-1.465 degrees
! Estimated noise=0.596379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011869 Jy
! Component: 100  -  total flux cleaned = 0.00133882 Jy
! Component: 150  -  total flux cleaned = 0.00143574 Jy
! Component: 200  -  total flux cleaned = 0.00151813 Jy
! Total flux subtracted in 200 components = 0.00151813 Jy
! Clean residual min=-0.002448 max=0.002385 Jy/beam
! Clean residual mean=-0.000009 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.098115 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.098115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064859Jy  sigma=1.202715
! Fit after  self-cal, rms=0.064879Jy  sigma=1.202497
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167701 Jy
! Component: 100  -  total flux cleaned = 0.000220813 Jy
! Component: 150  -  total flux cleaned = 0.000243808 Jy
! Component: 200  -  total flux cleaned = 0.000307706 Jy
! Total flux subtracted in 200 components = 0.000307706 Jy
! Clean residual min=-0.002398 max=0.002360 Jy/beam
! Clean residual mean=-0.000008 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0984227 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 82 components and 0.0984227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064861Jy  sigma=1.202136
! Fit after  self-cal, rms=0.064846Jy  sigma=1.202107
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064846Jy  sigma=1.202107
! Fit after  self-cal, rms=0.064755Jy  sigma=1.201970
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=6.74 mas, bpa=-1.445 degrees
! Estimated noise=0.594263 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136793 Jy
! Component: 100  -  total flux cleaned = 0.000137224 Jy
! Component: 150  -  total flux cleaned = 0.000116816 Jy
! Component: 200  -  total flux cleaned = 0.000115972 Jy
! Total flux subtracted in 200 components = 0.000115972 Jy
! Clean residual min=-0.002405 max=0.002500 Jy/beam
! Clean residual mean=-0.000006 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0985387 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 82 components and 0.0985386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064742Jy  sigma=1.201710
! Fit after  self-cal, rms=0.064744Jy  sigma=1.201683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.21877e-05 Jy
! Component: 100  -  total flux cleaned = 4.16157e-06 Jy
! Component: 150  -  total flux cleaned = 4.14831e-06 Jy
! Component: 200  -  total flux cleaned = 2.0421e-05 Jy
! Total flux subtracted in 200 components = 2.0421e-05 Jy
! Clean residual min=-0.002360 max=0.002478 Jy/beam
! Clean residual mean=-0.000006 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.0985591 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 85 components and 0.0985591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064735Jy  sigma=1.201510
! Fit after  self-cal, rms=0.064730Jy  sigma=1.201501
! Inverting map 
! Added new window around map position (-51, -99.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313527 Jy
! Component: 100  -  total flux cleaned = 0.000316909 Jy
! Component: 150  -  total flux cleaned = 0.000262798 Jy
! Component: 200  -  total flux cleaned = 0.000218927 Jy
! Total flux subtracted in 200 components = 0.000218927 Jy
! Clean residual min=-0.002360 max=0.001808 Jy/beam
! Clean residual mean=-0.000006 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.098778 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 102 components and 0.098778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064558Jy  sigma=1.199017
! Fit after  self-cal, rms=0.064523Jy  sigma=1.198616
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064523Jy  sigma=1.198616
! Fit after  self-cal, rms=0.063920Jy  sigma=1.198468
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.393 mas, bmaj=19.66 mas, bpa=-0.01334 degrees
! Estimated noise=0.770446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000675855 Jy
! Component: 100  -  total flux cleaned = -0.000912158 Jy
! Component: 150  -  total flux cleaned = -0.00098445 Jy
! Component: 200  -  total flux cleaned = -0.00102409 Jy
! Total flux subtracted in 200 components = -0.00102409 Jy
! Clean residual min=-0.002033 max=0.002026 Jy/beam
! Clean residual mean=-0.000010 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.0977539 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 107 components and 0.0977539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063912Jy  sigma=1.198254
! Fit after  self-cal, rms=0.063893Jy  sigma=1.198217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000270588 Jy
! Component: 100  -  total flux cleaned = -0.00038738 Jy
! Component: 150  -  total flux cleaned = -0.000492135 Jy
! Component: 200  -  total flux cleaned = -0.000524211 Jy
! Total flux subtracted in 200 components = -0.000524211 Jy
! Clean residual min=-0.001946 max=0.001960 Jy/beam
! Clean residual mean=-0.000010 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.0972297 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 110 components and 0.0972297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063890Jy  sigma=1.198140
! Fit after  self-cal, rms=0.063883Jy  sigma=1.198125
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=6.721 mas, bpa=-1.171 degrees
! Estimated noise=0.591638 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.686 x 6.721 at -1.171 degrees (North through East)
! Clean map  min=-0.0025197  max=0.071255 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.178 mas, bmaj=5.448 mas, bpa=0.1359 degrees
! Estimated noise=0.989324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0508608 Jy
! Component: 100  -  total flux cleaned = 0.0664462 Jy
! Component: 150  -  total flux cleaned = 0.0717592 Jy
! Component: 200  -  total flux cleaned = 0.0750146 Jy
! Total flux subtracted in 200 components = 0.0750146 Jy
! Clean residual min=-0.005492 max=0.005261 Jy/beam
! Clean residual mean=-0.000033 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 0.0750146 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0750146 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=6.721 mas, bpa=-1.171 degrees
! Estimated noise=0.591638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693403 Jy
! Component: 100  -  total flux cleaned = 0.0102395 Jy
! Component: 150  -  total flux cleaned = 0.0123029 Jy
! Component: 200  -  total flux cleaned = 0.0134772 Jy
! Total flux subtracted in 200 components = 0.0134772 Jy
! Clean residual min=-0.002765 max=0.002946 Jy/beam
! Clean residual mean=-0.000027 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.0884918 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 45 components and 0.0884918 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.393 mas, bmaj=19.66 mas, bpa=-0.01334 degrees
! Estimated noise=0.770446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306211 Jy
! Component: 100  -  total flux cleaned = 0.00473963 Jy
! Component: 150  -  total flux cleaned = 0.00539262 Jy
! Component: 200  -  total flux cleaned = 0.00568671 Jy
! Total flux subtracted in 200 components = 0.00568671 Jy
! Clean residual min=-0.002113 max=0.002062 Jy/beam
! Clean residual mean=-0.000019 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.0941785 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000273663 Jy
! Component: 100  -  total flux cleaned = 0.000559589 Jy
! Component: 150  -  total flux cleaned = 0.000809689 Jy
! Component: 200  -  total flux cleaned = 0.000991468 Jy
! Total flux subtracted in 200 components = 0.000991468 Jy
! Clean residual min=-0.001964 max=0.001970 Jy/beam
! Clean residual mean=-0.000014 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.09517 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 74 components and 0.09517 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=6.721 mas, bpa=-1.171 degrees
! Estimated noise=0.591638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000322825 Jy
! Component: 100  -  total flux cleaned = 0.000547562 Jy
! Component: 150  -  total flux cleaned = 0.00085198 Jy
! Component: 200  -  total flux cleaned = 0.00122661 Jy
! Total flux subtracted in 200 components = 0.00122661 Jy
! Clean residual min=-0.002466 max=0.001891 Jy/beam
! Clean residual mean=-0.000007 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.0963966 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 93 components and 0.0963966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063932Jy  sigma=1.199127
! Fit after  self-cal, rms=0.063875Jy  sigma=1.198656
wmodel /J2339-2310_S_map.mod
! wmodel: Unable to open new model file: /J2339-2310_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2339-2310_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.686 x 6.721 at -1.171 degrees (North through East)
! Clean map  min=-0.0030256  max=0.071743 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2339-2310_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0717432 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000514937 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.15325 2.15325 4.3065 8.613 17.226 34.452 68.904
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  139.324 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2339-2310_S_dfm.log closed on Fri May 20 00:23:38 2016