! Started logfile: /scr/pima/bg219a_uvs/J2306-0459_X_dfm.log on Fri May 20 00:23:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2306-0459_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2306-0459_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2306-0459
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 4200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2306-0459_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.033711Jy  sigma=26.595554
! Fit after  self-cal, rms=0.794783Jy  sigma=19.763911
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6934 mas, bmaj=1.797 mas, bpa=10.93 degrees
! Estimated noise=0.753119 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.148086 Jy
! Component: 100  -  total flux cleaned = 0.193234 Jy
! Total flux subtracted in 100 components = 0.193234 Jy
! Clean residual min=-0.016250 max=0.022832 Jy/beam
! Clean residual mean=0.000025 rms=0.005007 Jy/beam
! Combined flux in latest and established models = 0.193234 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.193234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096864Jy  sigma=2.517275
! Fit after  self-cal, rms=0.096739Jy  sigma=2.515231
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8726 mas, bmaj=2.194 mas, bpa=11.8 degrees
! Estimated noise=0.474453 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0504513 Jy
! Component: 100  -  total flux cleaned = 0.0759487 Jy
! Component: 150  -  total flux cleaned = 0.0896544 Jy
! Component: 200  -  total flux cleaned = 0.0973513 Jy
! Total flux subtracted in 200 components = 0.0973513 Jy
! Clean residual min=-0.009658 max=0.016642 Jy/beam
! Clean residual mean=0.000032 rms=0.002788 Jy/beam
! Combined flux in latest and established models = 0.290586 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 30 components and 0.290586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071631Jy  sigma=1.741077
! Fit after  self-cal, rms=0.071574Jy  sigma=1.735042
! Inverting map 
! Added new window around map position (2, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146932 Jy
! Component: 100  -  total flux cleaned = 0.0213776 Jy
! Component: 150  -  total flux cleaned = 0.0258316 Jy
! Component: 200  -  total flux cleaned = 0.0278908 Jy
! Total flux subtracted in 200 components = 0.0278908 Jy
! Clean residual min=-0.004758 max=0.006778 Jy/beam
! Clean residual mean=0.000015 rms=0.001255 Jy/beam
! Combined flux in latest and established models = 0.318476 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 55 components and 0.318477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068670Jy  sigma=1.651737
! Fit after  self-cal, rms=0.068473Jy  sigma=1.647754
! Inverting map 
! Added new window around map position (-3.4, 8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00572159 Jy
! Component: 100  -  total flux cleaned = 0.00740443 Jy
! Component: 150  -  total flux cleaned = 0.00813169 Jy
! Component: 200  -  total flux cleaned = 0.00858359 Jy
! Total flux subtracted in 200 components = 0.00858359 Jy
! Clean residual min=-0.003311 max=0.003756 Jy/beam
! Clean residual mean=0.000010 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.32706 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.32706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067983Jy  sigma=1.634329
! Fit after  self-cal, rms=0.067946Jy  sigma=1.633736
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8726 x 2.194 at 11.8 degrees (North through East)
! Clean map  min=-0.0030641  max=0.20843 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.06     NL        1.02     OV        1.01     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        0.99     OV        1.04     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.07     NL        0.98     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.89     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.94     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.15     NL        1.04     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.04     NL        0.98     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.05     NL        1.01     OV        1.01     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.89     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.02     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        0.96     OV        1.03     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        1.01     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.067946Jy  sigma=1.633736
! Fit after  self-cal, rms=0.068277Jy  sigma=1.626731
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8752 mas, bmaj=2.202 mas, bpa=11.83 degrees
! Estimated noise=0.476159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000716272 Jy
! Component: 100  -  total flux cleaned = -0.00101937 Jy
! Component: 150  -  total flux cleaned = -0.00115046 Jy
! Component: 200  -  total flux cleaned = -0.00115075 Jy
! Total flux subtracted in 200 components = -0.00115075 Jy
! Clean residual min=-0.002835 max=0.003258 Jy/beam
! Clean residual mean=0.000008 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.325909 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 87 components and 0.325909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068206Jy  sigma=1.625327
! Fit after  self-cal, rms=0.068213Jy  sigma=1.625253
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068213Jy  sigma=1.625253
! Fit after  self-cal, rms=0.068403Jy  sigma=1.621301
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8762 mas, bmaj=2.204 mas, bpa=11.82 degrees
! Estimated noise=0.477174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00029435 Jy
! Component: 100  -  total flux cleaned = -0.000175211 Jy
! Component: 150  -  total flux cleaned = -0.000141029 Jy
! Component: 200  -  total flux cleaned = -0.000139454 Jy
! Total flux subtracted in 200 components = -0.000139454 Jy
! Clean residual min=-0.002667 max=0.002871 Jy/beam
! Clean residual mean=0.000004 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.32577 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.32577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068358Jy  sigma=1.620209
! Fit after  self-cal, rms=0.068366Jy  sigma=1.620148
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.2, 48.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243306 Jy
! Component: 100  -  total flux cleaned = 0.00299477 Jy
! Component: 150  -  total flux cleaned = 0.003246 Jy
! Component: 200  -  total flux cleaned = 0.00330655 Jy
! Total flux subtracted in 200 components = 0.00330655 Jy
! Clean residual min=-0.002337 max=0.002026 Jy/beam
! Clean residual mean=0.000001 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.329077 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 116 components and 0.329076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068266Jy  sigma=1.617806
! Fit after  self-cal, rms=0.068261Jy  sigma=1.617660
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068261Jy  sigma=1.617660
! Fit after  self-cal, rms=0.068301Jy  sigma=1.617448
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=2.205 mas, bpa=11.83 degrees
! Estimated noise=0.477107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000489372 Jy
! Component: 100  -  total flux cleaned = 0.000740273 Jy
! Component: 150  -  total flux cleaned = 0.000884133 Jy
! Component: 200  -  total flux cleaned = 0.000927421 Jy
! Total flux subtracted in 200 components = 0.000927421 Jy
! Clean residual min=-0.002011 max=0.001884 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.330004 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 129 components and 0.330004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068277Jy  sigma=1.616929
! Fit after  self-cal, rms=0.068280Jy  sigma=1.616903
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139909 Jy
! Component: 100  -  total flux cleaned = 0.000201017 Jy
! Component: 150  -  total flux cleaned = 0.000200955 Jy
! Component: 200  -  total flux cleaned = 0.000237996 Jy
! Total flux subtracted in 200 components = 0.000237996 Jy
! Clean residual min=-0.001947 max=0.001825 Jy/beam
! Clean residual mean=-0.000001 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.330242 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 134 components and 0.330242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068267Jy  sigma=1.616690
! Fit after  self-cal, rms=0.068267Jy  sigma=1.616683
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068267Jy  sigma=1.616683
! Fit after  self-cal, rms=0.068266Jy  sigma=1.616632
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.136 mas, bmaj=4.795 mas, bpa=0.2261 degrees
! Estimated noise=0.584356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000319444 Jy
! Component: 100  -  total flux cleaned = 0.000348387 Jy
! Component: 150  -  total flux cleaned = 0.000382392 Jy
! Component: 200  -  total flux cleaned = 0.000392512 Jy
! Total flux subtracted in 200 components = 0.000392512 Jy
! Clean residual min=-0.001564 max=0.001455 Jy/beam
! Clean residual mean=-0.000002 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.330635 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 147 components and 0.330635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068261Jy  sigma=1.616512
! Fit after  self-cal, rms=0.068261Jy  sigma=1.616498
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134994 Jy
! Component: 100  -  total flux cleaned = 0.000163664 Jy
! Component: 150  -  total flux cleaned = 0.000181102 Jy
! Component: 200  -  total flux cleaned = 0.000188927 Jy
! Total flux subtracted in 200 components = 0.000188927 Jy
! Clean residual min=-0.001476 max=0.001387 Jy/beam
! Clean residual mean=-0.000003 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.330823 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 150 components and 0.330823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068257Jy  sigma=1.616456
! Fit after  self-cal, rms=0.068258Jy  sigma=1.616449
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=2.205 mas, bpa=11.81 degrees
! Estimated noise=0.477225 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8768 x 2.205 at 11.81 degrees (North through East)
! Clean map  min=-0.0023133  max=0.20912 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6957 mas, bmaj=1.799 mas, bpa=10.92 degrees
! Estimated noise=0.761183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1497 Jy
! Component: 100  -  total flux cleaned = 0.196531 Jy
! Component: 150  -  total flux cleaned = 0.224576 Jy
! Component: 200  -  total flux cleaned = 0.244008 Jy
! Total flux subtracted in 200 components = 0.244008 Jy
! Clean residual min=-0.009444 max=0.012359 Jy/beam
! Clean residual mean=0.000014 rms=0.003102 Jy/beam
! Combined flux in latest and established models = 0.244009 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.244009 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=2.205 mas, bpa=11.81 degrees
! Estimated noise=0.477225 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0281486 Jy
! Component: 100  -  total flux cleaned = 0.0436199 Jy
! Component: 150  -  total flux cleaned = 0.0536067 Jy
! Component: 200  -  total flux cleaned = 0.0605962 Jy
! Total flux subtracted in 200 components = 0.0605962 Jy
! Clean residual min=-0.005182 max=0.004528 Jy/beam
! Clean residual mean=0.000017 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.304605 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 60 components and 0.304605 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.136 mas, bmaj=4.795 mas, bpa=0.2261 degrees
! Estimated noise=0.584356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00781552 Jy
! Component: 100  -  total flux cleaned = 0.0123386 Jy
! Component: 150  -  total flux cleaned = 0.0154948 Jy
! Component: 200  -  total flux cleaned = 0.0178525 Jy
! Total flux subtracted in 200 components = 0.0178525 Jy
! Clean residual min=-0.003133 max=0.002120 Jy/beam
! Clean residual mean=0.000013 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.322457 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180637 Jy
! Component: 100  -  total flux cleaned = 0.00322572 Jy
! Component: 150  -  total flux cleaned = 0.00435595 Jy
! Component: 200  -  total flux cleaned = 0.00526216 Jy
! Total flux subtracted in 200 components = 0.00526216 Jy
! Clean residual min=-0.002662 max=0.001695 Jy/beam
! Clean residual mean=0.000005 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.327719 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 127 components and 0.327719 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=2.205 mas, bpa=11.81 degrees
! Estimated noise=0.477225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164057 Jy
! Component: 100  -  total flux cleaned = 0.00214382 Jy
! Component: 150  -  total flux cleaned = 0.00233599 Jy
! Component: 200  -  total flux cleaned = 0.00256285 Jy
! Total flux subtracted in 200 components = 0.00256285 Jy
! Clean residual min=-0.002132 max=0.001984 Jy/beam
! Clean residual mean=-0.000000 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.330282 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 144 components and 0.330282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068439Jy  sigma=1.618584
! Fit after  self-cal, rms=0.068365Jy  sigma=1.617867
wmodel /J2306-0459_X_map.mod
! wmodel: Unable to open new model file: /J2306-0459_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2306-0459_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8768 x 2.205 at 11.81 degrees (North through East)
! Clean map  min=-0.00177  max=0.20455 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2306-0459_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.204554 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000440914 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.646645 0.646645 1.29329 2.58658 5.17316 10.3463 20.6926 41.3853 82.7706
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.204 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  463.932 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2306-0459_X_dfm.log closed on Fri May 20 00:23:07 2016