! Started logfile: /scr/pima/bg219a_uvs/J2306-0459_S_dfm.log on Fri May 20 00:23:01 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2306-0459_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2306-0459_S_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2306-0459
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2306-0459_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.068924Jy  sigma=22.301228
! Fit after  self-cal, rms=0.731421Jy  sigma=15.056978
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.771 mas, bmaj=7.135 mas, bpa=10.15 degrees
! Estimated noise=1.28498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.202427 Jy
! Component: 100  -  total flux cleaned = 0.260653 Jy
! Total flux subtracted in 100 components = 0.260653 Jy
! Clean residual min=-0.015355 max=0.025861 Jy/beam
! Clean residual mean=-0.000014 rms=0.005369 Jy/beam
! Combined flux in latest and established models = 0.260653 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.260653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090619Jy  sigma=1.726095
! Fit after  self-cal, rms=0.090659Jy  sigma=1.725601
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=8.072 mas, bpa=7.428 degrees
! Estimated noise=1.00273 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0410795 Jy
! Component: 100  -  total flux cleaned = 0.0608329 Jy
! Component: 150  -  total flux cleaned = 0.0712476 Jy
! Component: 200  -  total flux cleaned = 0.0771705 Jy
! Total flux subtracted in 200 components = 0.0771705 Jy
! Clean residual min=-0.010253 max=0.010058 Jy/beam
! Clean residual mean=-0.000027 rms=0.002982 Jy/beam
! Combined flux in latest and established models = 0.337824 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 71 components and 0.337824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071836Jy  sigma=1.278011
! Fit after  self-cal, rms=0.071907Jy  sigma=1.277335
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.232 x 8.072 at 7.428 degrees (North through East)
! Clean map  min=-0.0099155  max=0.26984 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.04     NL        0.97     OV        1.05     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.01     NL        1.00     OV        1.06     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.05     NL        0.88     OV        1.04     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.06     NL        0.99     OV        1.05     
!   PT        0.94     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.071907Jy  sigma=1.277335
! Fit after  self-cal, rms=0.066803Jy  sigma=1.230766
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.265 mas, bmaj=8.109 mas, bpa=7.615 degrees
! Estimated noise=1.00582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306194 Jy
! Component: 100  -  total flux cleaned = 0.00373678 Jy
! Component: 150  -  total flux cleaned = 0.00398671 Jy
! Component: 200  -  total flux cleaned = 0.00415698 Jy
! Total flux subtracted in 200 components = 0.00415698 Jy
! Clean residual min=-0.007589 max=0.009262 Jy/beam
! Clean residual mean=-0.000022 rms=0.002385 Jy/beam
! Combined flux in latest and established models = 0.341981 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 77 components and 0.341981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066593Jy  sigma=1.227670
! Fit after  self-cal, rms=0.066581Jy  sigma=1.227473
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066581Jy  sigma=1.227473
! Fit after  self-cal, rms=0.066226Jy  sigma=1.195475
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.253 mas, bmaj=8.091 mas, bpa=7.593 degrees
! Estimated noise=1.01774 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372268 Jy
! Component: 100  -  total flux cleaned = 0.00530293 Jy
! Component: 150  -  total flux cleaned = 0.00575752 Jy
! Component: 200  -  total flux cleaned = 0.00578577 Jy
! Total flux subtracted in 200 components = 0.00578577 Jy
! Clean residual min=-0.006400 max=0.006615 Jy/beam
! Clean residual mean=-0.000010 rms=0.001850 Jy/beam
! Combined flux in latest and established models = 0.347766 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 80 components and 0.347766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065945Jy  sigma=1.193200
! Fit after  self-cal, rms=0.065948Jy  sigma=1.193125
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.80214e-05 Jy
! Component: 100  -  total flux cleaned = 7.76532e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100287 Jy
! Component: 200  -  total flux cleaned = 0.000144416 Jy
! Total flux subtracted in 200 components = 0.000144416 Jy
! Clean residual min=-0.006419 max=0.006629 Jy/beam
! Clean residual mean=-0.000010 rms=0.001843 Jy/beam
! Combined flux in latest and established models = 0.347911 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 83 components and 0.347911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065925Jy  sigma=1.192916
! Fit after  self-cal, rms=0.065923Jy  sigma=1.192900
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065923Jy  sigma=1.192900
! Fit after  self-cal, rms=0.066399Jy  sigma=1.189819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.249 mas, bmaj=8.09 mas, bpa=7.759 degrees
! Estimated noise=1.02947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312004 Jy
! Component: 100  -  total flux cleaned = 0.0045048 Jy
! Component: 150  -  total flux cleaned = 0.00493492 Jy
! Component: 200  -  total flux cleaned = 0.00505707 Jy
! Total flux subtracted in 200 components = 0.00505707 Jy
! Clean residual min=-0.006431 max=0.006675 Jy/beam
! Clean residual mean=-0.000008 rms=0.001831 Jy/beam
! Combined flux in latest and established models = 0.352968 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 83 components and 0.352968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066192Jy  sigma=1.188353
! Fit after  self-cal, rms=0.066192Jy  sigma=1.188334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.86154e-05 Jy
! Component: 100  -  total flux cleaned = 9.05354e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109001 Jy
! Component: 200  -  total flux cleaned = 0.000128167 Jy
! Total flux subtracted in 200 components = 0.000128167 Jy
! Clean residual min=-0.006383 max=0.006689 Jy/beam
! Clean residual mean=-0.000008 rms=0.001826 Jy/beam
! Combined flux in latest and established models = 0.353096 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 84 components and 0.353096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066175Jy  sigma=1.188204
! Fit after  self-cal, rms=0.066175Jy  sigma=1.188191
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066175Jy  sigma=1.188191
! Fit after  self-cal, rms=0.066556Jy  sigma=1.185886
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.649 mas, bmaj=16.79 mas, bpa=1.626 degrees
! Estimated noise=1.26232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00379238 Jy
! Component: 100  -  total flux cleaned = 0.00409142 Jy
! Component: 150  -  total flux cleaned = 0.00424765 Jy
! Component: 200  -  total flux cleaned = 0.00432477 Jy
! Total flux subtracted in 200 components = 0.00432477 Jy
! Clean residual min=-0.008147 max=0.009264 Jy/beam
! Clean residual mean=-0.000014 rms=0.002611 Jy/beam
! Combined flux in latest and established models = 0.357421 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 84 components and 0.357421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066405Jy  sigma=1.185429
! Fit after  self-cal, rms=0.066393Jy  sigma=1.185183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000253724 Jy
! Component: 100  -  total flux cleaned = -0.000254594 Jy
! Component: 150  -  total flux cleaned = -0.000255336 Jy
! Component: 200  -  total flux cleaned = -0.000209349 Jy
! Total flux subtracted in 200 components = -0.000209349 Jy
! Clean residual min=-0.008077 max=0.009180 Jy/beam
! Clean residual mean=-0.000014 rms=0.002571 Jy/beam
! Combined flux in latest and established models = 0.357212 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 84 components and 0.357212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066423Jy  sigma=1.186238
! Fit after  self-cal, rms=0.066412Jy  sigma=1.185976
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.244 mas, bmaj=8.086 mas, bpa=7.885 degrees
! Estimated noise=1.0392 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.244 x 8.086 at 7.885 degrees (North through East)
! Clean map  min=-0.0062706  max=0.26823 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.778 mas, bmaj=7.169 mas, bpa=10.76 degrees
! Estimated noise=1.32958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.209207 Jy
! Component: 100  -  total flux cleaned = 0.268376 Jy
! Component: 150  -  total flux cleaned = 0.299328 Jy
! Component: 200  -  total flux cleaned = 0.318074 Jy
! Total flux subtracted in 200 components = 0.318074 Jy
! Clean residual min=-0.008973 max=0.010369 Jy/beam
! Clean residual mean=-0.000006 rms=0.002549 Jy/beam
! Combined flux in latest and established models = 0.318074 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 0.318074 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.244 mas, bmaj=8.086 mas, bpa=7.885 degrees
! Estimated noise=1.0392 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175215 Jy
! Component: 100  -  total flux cleaned = 0.0264815 Jy
! Component: 150  -  total flux cleaned = 0.0314733 Jy
! Component: 200  -  total flux cleaned = 0.0343352 Jy
! Total flux subtracted in 200 components = 0.0343352 Jy
! Clean residual min=-0.006845 max=0.006436 Jy/beam
! Clean residual mean=-0.000008 rms=0.001915 Jy/beam
! Combined flux in latest and established models = 0.352409 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 93 components and 0.352409 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.649 mas, bmaj=16.79 mas, bpa=1.626 degrees
! Estimated noise=1.26232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208395 Jy
! Component: 100  -  total flux cleaned = 0.00228467 Jy
! Component: 150  -  total flux cleaned = 0.00238723 Jy
! Component: 200  -  total flux cleaned = 0.00246767 Jy
! Total flux subtracted in 200 components = 0.00246767 Jy
! Clean residual min=-0.008660 max=0.010049 Jy/beam
! Clean residual mean=-0.000016 rms=0.002782 Jy/beam
! Combined flux in latest and established models = 0.354877 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.49932e-05 Jy
! Component: 100  -  total flux cleaned = 6.64936e-05 Jy
! Component: 150  -  total flux cleaned = 9.72653e-05 Jy
! Component: 200  -  total flux cleaned = 0.000126906 Jy
! Total flux subtracted in 200 components = 0.000126906 Jy
! Clean residual min=-0.008599 max=0.009961 Jy/beam
! Clean residual mean=-0.000016 rms=0.002751 Jy/beam
! Combined flux in latest and established models = 0.355004 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 97 components and 0.355004 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.244 mas, bmaj=8.086 mas, bpa=7.885 degrees
! Estimated noise=1.0392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00022464 Jy
! Component: 100  -  total flux cleaned = 0.000229707 Jy
! Component: 150  -  total flux cleaned = 0.000327667 Jy
! Component: 200  -  total flux cleaned = 0.000411353 Jy
! Total flux subtracted in 200 components = 0.000411353 Jy
! Clean residual min=-0.006865 max=0.006419 Jy/beam
! Clean residual mean=-0.000008 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 0.355415 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 108 components and 0.355415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066488Jy  sigma=1.186558
! Fit after  self-cal, rms=0.066492Jy  sigma=1.186448
wmodel /J2306-0459_S_map.mod
! wmodel: Unable to open new model file: /J2306-0459_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2306-0459_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.244 x 8.086 at 7.885 degrees (North through East)
! Clean map  min=-0.0064857  max=0.27537 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2306-0459_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.275374 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00185364 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.01941 2.01941 4.03883 8.07765 16.1553 32.3106 64.6212
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0055 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.275 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  148.558 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2306-0459_S_dfm.log closed on Fri May 20 00:23:03 2016