! Started logfile: /scr/pima/bg219a_uvs/J2301-0158_X_dfm.log on Fri May 20 00:22:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2301-0158_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2301-0158_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2301-0158
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 4200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2301-0158_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.123305Jy  sigma=25.554178
! Fit after  self-cal, rms=0.525719Jy  sigma=11.026312
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6999 mas, bmaj=1.8 mas, bpa=10.8 degrees
! Estimated noise=0.935329 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.366079 Jy
! Component: 100  -  total flux cleaned = 0.473832 Jy
! Total flux subtracted in 100 components = 0.473832 Jy
! Clean residual min=-0.035191 max=0.049747 Jy/beam
! Clean residual mean=0.000010 rms=0.009404 Jy/beam
! Combined flux in latest and established models = 0.473832 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.473832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.162427Jy  sigma=3.866294
! Fit after  self-cal, rms=0.162371Jy  sigma=3.863240
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8569 mas, bmaj=2.109 mas, bpa=10.16 degrees
! Estimated noise=0.541172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0888995 Jy
! Component: 100  -  total flux cleaned = 0.131802 Jy
! Component: 150  -  total flux cleaned = 0.15441 Jy
! Component: 200  -  total flux cleaned = 0.166835 Jy
! Total flux subtracted in 200 components = 0.166835 Jy
! Clean residual min=-0.013820 max=0.020125 Jy/beam
! Clean residual mean=0.000011 rms=0.003768 Jy/beam
! Combined flux in latest and established models = 0.640667 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 39 components and 0.640667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114263Jy  sigma=2.686042
! Fit after  self-cal, rms=0.114037Jy  sigma=2.680861
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8569 x 2.109 at 10.16 degrees (North through East)
! Clean map  min=-0.012375  max=0.50627 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.04     NL        0.97     OV        1.08     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.05     NL        0.99     OV        1.07     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.09     NL        0.98     OV        1.06     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.96     NL        0.99     OV        1.08     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.05     NL        1.00     OV        1.06     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.05     NL        0.98     OV        1.07     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.04     NL        0.97     OV        1.06     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        0.97     OV        1.08     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.99     NL        0.98     OV        1.06     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.07     NL        0.97     OV        1.06     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        0.98     OV        1.07     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        0.97     OV        1.07     
!   PT        0.96     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.114037Jy  sigma=2.680861
! Fit after  self-cal, rms=0.113192Jy  sigma=2.602905
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8663 mas, bmaj=2.122 mas, bpa=10.25 degrees
! Estimated noise=0.53887 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00920373 Jy
! Component: 100  -  total flux cleaned = 0.00922474 Jy
! Component: 150  -  total flux cleaned = 0.00924048 Jy
! Component: 200  -  total flux cleaned = 0.00894771 Jy
! Total flux subtracted in 200 components = 0.00894771 Jy
! Clean residual min=-0.005402 max=0.004525 Jy/beam
! Clean residual mean=-0.000000 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.649615 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.649615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112301Jy  sigma=2.586659
! Fit after  self-cal, rms=0.112267Jy  sigma=2.585639
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112267Jy  sigma=2.585639
! Fit after  self-cal, rms=0.111930Jy  sigma=2.579770
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8647 mas, bmaj=2.119 mas, bpa=10.22 degrees
! Estimated noise=0.537446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292788 Jy
! Component: 100  -  total flux cleaned = 0.00382454 Jy
! Component: 150  -  total flux cleaned = 0.00396455 Jy
! Component: 200  -  total flux cleaned = 0.00396691 Jy
! Total flux subtracted in 200 components = 0.00396691 Jy
! Clean residual min=-0.004337 max=0.003408 Jy/beam
! Clean residual mean=-0.000001 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.653582 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 0.653582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111839Jy  sigma=2.578124
! Fit after  self-cal, rms=0.111831Jy  sigma=2.577890
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000835493 Jy
! Component: 100  -  total flux cleaned = 0.00106337 Jy
! Component: 150  -  total flux cleaned = 0.000999107 Jy
! Component: 200  -  total flux cleaned = 0.000939599 Jy
! Total flux subtracted in 200 components = 0.000939599 Jy
! Clean residual min=-0.004148 max=0.003364 Jy/beam
! Clean residual mean=-0.000001 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.654521 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 77 components and 0.654521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111802Jy  sigma=2.577505
! Fit after  self-cal, rms=0.111799Jy  sigma=2.577443
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111799Jy  sigma=2.577443
! Fit after  self-cal, rms=0.111789Jy  sigma=2.577081
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8648 mas, bmaj=2.119 mas, bpa=10.24 degrees
! Estimated noise=0.537498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153966 Jy
! Component: 100  -  total flux cleaned = 0.00186523 Jy
! Component: 150  -  total flux cleaned = 0.00187242 Jy
! Component: 200  -  total flux cleaned = 0.00174016 Jy
! Total flux subtracted in 200 components = 0.00174016 Jy
! Clean residual min=-0.003752 max=0.003080 Jy/beam
! Clean residual mean=-0.000000 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.656261 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 83 components and 0.656261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111759Jy  sigma=2.576597
! Fit after  self-cal, rms=0.111757Jy  sigma=2.576517
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049631 Jy
! Component: 100  -  total flux cleaned = 0.000578459 Jy
! Component: 150  -  total flux cleaned = 0.000529931 Jy
! Component: 200  -  total flux cleaned = 0.000437539 Jy
! Total flux subtracted in 200 components = 0.000437539 Jy
! Clean residual min=-0.003644 max=0.003041 Jy/beam
! Clean residual mean=-0.000001 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.656699 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 87 components and 0.656699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111742Jy  sigma=2.576331
! Fit after  self-cal, rms=0.111741Jy  sigma=2.576306
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111741Jy  sigma=2.576306
! Fit after  self-cal, rms=0.111787Jy  sigma=2.576161
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.12 mas, bmaj=4.49 mas, bpa=-0.4431 degrees
! Estimated noise=0.678561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000954999 Jy
! Component: 100  -  total flux cleaned = 0.000844667 Jy
! Component: 150  -  total flux cleaned = 0.000821913 Jy
! Component: 200  -  total flux cleaned = 0.000802914 Jy
! Total flux subtracted in 200 components = 0.000802914 Jy
! Clean residual min=-0.004240 max=0.003802 Jy/beam
! Clean residual mean=0.000000 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.657502 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.657502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111779Jy  sigma=2.575998
! Fit after  self-cal, rms=0.111778Jy  sigma=2.575922
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000286298 Jy
! Component: 100  -  total flux cleaned = 0.000221263 Jy
! Component: 150  -  total flux cleaned = 0.000204829 Jy
! Component: 200  -  total flux cleaned = 0.000205502 Jy
! Total flux subtracted in 200 components = 0.000205502 Jy
! Clean residual min=-0.004163 max=0.003788 Jy/beam
! Clean residual mean=-0.000000 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.657707 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 106 components and 0.657707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111775Jy  sigma=2.575853
! Fit after  self-cal, rms=0.111773Jy  sigma=2.575792
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.865 mas, bmaj=2.119 mas, bpa=10.25 degrees
! Estimated noise=0.537695 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.865 x 2.119 at 10.25 degrees (North through East)
! Clean map  min=-0.0031749  max=0.50259 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111773Jy  sigma=2.575792
! Fit after  self-cal, rms=0.104166Jy  sigma=2.404290
! Inverting map and beam 
! Estimated beam: bmin=0.8668 mas, bmaj=2.13 mas, bpa=10.4 degrees
! Estimated noise=0.514913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0179303 Jy
! Component: 100  -  total flux cleaned = -0.0213462 Jy
! Component: 150  -  total flux cleaned = -0.0215338 Jy
! Component: 200  -  total flux cleaned = -0.0218321 Jy
! Total flux subtracted in 200 components = -0.0218321 Jy
! Clean residual min=-0.004189 max=0.006775 Jy/beam
! Clean residual mean=0.000003 rms=0.001347 Jy/beam
! Combined flux in latest and established models = 0.635875 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 128 components and 0.635875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101280Jy  sigma=2.334744
! Fit after  self-cal, rms=0.101269Jy  sigma=2.334446
! Inverting map 
! Added new window around map position (-0.4, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00493862 Jy
! Component: 100  -  total flux cleaned = 0.00574341 Jy
! Component: 150  -  total flux cleaned = 0.00538644 Jy
! Component: 200  -  total flux cleaned = 0.00515699 Jy
! Total flux subtracted in 200 components = 0.00515699 Jy
! Clean residual min=-0.002698 max=0.005269 Jy/beam
! Clean residual mean=0.000003 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.641032 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 148 components and 0.641032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100908Jy  sigma=2.328076
! Fit after  self-cal, rms=0.100889Jy  sigma=2.327515
! Inverting map 
! Added new window around map position (0.6, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412559 Jy
! Component: 100  -  total flux cleaned = 0.00622292 Jy
! Component: 150  -  total flux cleaned = 0.00781619 Jy
! Component: 200  -  total flux cleaned = 0.00908042 Jy
! Total flux subtracted in 200 components = 0.00908042 Jy
! Clean residual min=-0.002010 max=0.002041 Jy/beam
! Clean residual mean=0.000003 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.650113 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 183 components and 0.650113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100677Jy  sigma=2.324129
! Fit after  self-cal, rms=0.100668Jy  sigma=2.323976
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100668Jy  sigma=2.323976
! Fit after  self-cal, rms=0.097277Jy  sigma=2.244617
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.706 mas, bmaj=1.819 mas, bpa=11.2 degrees
! Estimated noise=0.867616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.339564 Jy
! Component: 100  -  total flux cleaned = 0.436089 Jy
! Component: 150  -  total flux cleaned = 0.488396 Jy
! Component: 200  -  total flux cleaned = 0.519809 Jy
! Total flux subtracted in 200 components = 0.519809 Jy
! Clean residual min=-0.015078 max=0.016151 Jy/beam
! Clean residual mean=0.000006 rms=0.003853 Jy/beam
! Combined flux in latest and established models = 0.519809 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.519809 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8684 mas, bmaj=2.141 mas, bpa=10.53 degrees
! Estimated noise=0.495716 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0323671 Jy
! Component: 100  -  total flux cleaned = 0.0505518 Jy
! Component: 150  -  total flux cleaned = 0.0628874 Jy
! Component: 200  -  total flux cleaned = 0.0721987 Jy
! Total flux subtracted in 200 components = 0.0721987 Jy
! Clean residual min=-0.006701 max=0.008151 Jy/beam
! Clean residual mean=0.000009 rms=0.001957 Jy/beam
! Combined flux in latest and established models = 0.592008 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 44 components and 0.592008 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.114 mas, bmaj=4.548 mas, bpa=-0.4652 degrees
! Estimated noise=0.621579 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123464 Jy
! Component: 100  -  total flux cleaned = 0.018186 Jy
! Component: 150  -  total flux cleaned = 0.0222016 Jy
! Component: 200  -  total flux cleaned = 0.0254617 Jy
! Total flux subtracted in 200 components = 0.0254617 Jy
! Clean residual min=-0.004318 max=0.004355 Jy/beam
! Clean residual mean=0.000010 rms=0.001309 Jy/beam
! Combined flux in latest and established models = 0.61747 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268043 Jy
! Component: 100  -  total flux cleaned = 0.00471443 Jy
! Component: 150  -  total flux cleaned = 0.006289 Jy
! Component: 200  -  total flux cleaned = 0.00776446 Jy
! Total flux subtracted in 200 components = 0.00776446 Jy
! Clean residual min=-0.002598 max=0.002412 Jy/beam
! Clean residual mean=0.000008 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.625234 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 99 components and 0.625234 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8684 mas, bmaj=2.141 mas, bpa=10.53 degrees
! Estimated noise=0.495716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155286 Jy
! Component: 100  -  total flux cleaned = 0.00171315 Jy
! Component: 150  -  total flux cleaned = 0.00249874 Jy
! Component: 200  -  total flux cleaned = 0.00316753 Jy
! Total flux subtracted in 200 components = 0.00316753 Jy
! Clean residual min=-0.003023 max=0.002654 Jy/beam
! Clean residual mean=0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.628402 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 115 components and 0.628402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094698Jy  sigma=2.188557
! Fit after  self-cal, rms=0.094678Jy  sigma=2.187968
wmodel /J2301-0158_X_map.mod
! wmodel: Unable to open new model file: /J2301-0158_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2301-0158_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8684 x 2.141 at 10.53 degrees (North through East)
! Clean map  min=-0.0026222  max=0.46448 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2301-0158_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.464478 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000618107 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.399227 0.399227 0.798454 1.59691 3.19382 6.38763 12.7753 25.5505 51.1011
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.464 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  751.452 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2301-0158_X_dfm.log closed on Fri May 20 00:22:53 2016