! Started logfile: /scr/pima/bg219a_uvs/J2301-0158_S_dfm.log on Fri May 20 00:22:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2301-0158_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2301-0158_S_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2301-0158
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2301-0158_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.114329Jy  sigma=22.781385
! Fit after  self-cal, rms=0.584541Jy  sigma=11.569875
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.747 mas, bmaj=6.784 mas, bpa=6.416 degrees
! Estimated noise=1.22172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.320285 Jy
! Component: 100  -  total flux cleaned = 0.400856 Jy
! Total flux subtracted in 100 components = 0.400856 Jy
! Clean residual min=-0.021000 max=0.031498 Jy/beam
! Clean residual mean=-0.000043 rms=0.005831 Jy/beam
! Combined flux in latest and established models = 0.400857 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.400857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081103Jy  sigma=1.617361
! Fit after  self-cal, rms=0.081126Jy  sigma=1.616221
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.24 mas, bmaj=7.851 mas, bpa=6.444 degrees
! Estimated noise=1.03079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0410532 Jy
! Component: 100  -  total flux cleaned = 0.0596395 Jy
! Component: 150  -  total flux cleaned = 0.0690868 Jy
! Component: 200  -  total flux cleaned = 0.0742905 Jy
! Total flux subtracted in 200 components = 0.0742905 Jy
! Clean residual min=-0.009954 max=0.008211 Jy/beam
! Clean residual mean=-0.000009 rms=0.002012 Jy/beam
! Combined flux in latest and established models = 0.475147 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 34 components and 0.475147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061597Jy  sigma=1.144774
! Fit after  self-cal, rms=0.061601Jy  sigma=1.143576
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.24 x 7.851 at 6.444 degrees (North through East)
! Clean map  min=-0.0095873  max=0.41834 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        0.96     OV        1.03     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.05     NL        0.98     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.03     NL        0.95     OV        1.03     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.03     NL        0.94     OV        1.02     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.061601Jy  sigma=1.143576
! Fit after  self-cal, rms=0.059583Jy  sigma=1.100580
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.26 mas, bmaj=7.859 mas, bpa=6.621 degrees
! Estimated noise=1.02859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000434208 Jy
! Component: 100  -  total flux cleaned = 0.000513952 Jy
! Component: 150  -  total flux cleaned = 0.000585164 Jy
! Component: 200  -  total flux cleaned = 0.000773248 Jy
! Total flux subtracted in 200 components = 0.000773248 Jy
! Clean residual min=-0.004715 max=0.004786 Jy/beam
! Clean residual mean=-0.000003 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.47592 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 41 components and 0.47592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059371Jy  sigma=1.097188
! Fit after  self-cal, rms=0.059374Jy  sigma=1.097037
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059374Jy  sigma=1.097037
! Fit after  self-cal, rms=0.059297Jy  sigma=1.090435
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.259 mas, bmaj=7.858 mas, bpa=6.598 degrees
! Estimated noise=1.02918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025638 Jy
! Component: 100  -  total flux cleaned = 0.000413267 Jy
! Component: 150  -  total flux cleaned = 0.000484902 Jy
! Component: 200  -  total flux cleaned = 0.0005862 Jy
! Total flux subtracted in 200 components = 0.0005862 Jy
! Clean residual min=-0.003811 max=0.004684 Jy/beam
! Clean residual mean=-0.000009 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.476506 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.476506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059249Jy  sigma=1.089645
! Fit after  self-cal, rms=0.059255Jy  sigma=1.089621
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375636 Jy
! Component: 100  -  total flux cleaned = 0.00407027 Jy
! Component: 150  -  total flux cleaned = 0.00412046 Jy
! Component: 200  -  total flux cleaned = 0.00424887 Jy
! Total flux subtracted in 200 components = 0.00424887 Jy
! Clean residual min=-0.003199 max=0.003200 Jy/beam
! Clean residual mean=-0.000007 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.480755 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.480755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058939Jy  sigma=1.084216
! Fit after  self-cal, rms=0.058934Jy  sigma=1.083965
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058934Jy  sigma=1.083965
! Fit after  self-cal, rms=0.058776Jy  sigma=1.083743
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=7.853 mas, bpa=6.571 degrees
! Estimated noise=1.02712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158468 Jy
! Component: 100  -  total flux cleaned = 0.000241216 Jy
! Component: 150  -  total flux cleaned = 0.000211297 Jy
! Component: 200  -  total flux cleaned = 0.000124713 Jy
! Total flux subtracted in 200 components = 0.000124713 Jy
! Clean residual min=-0.003015 max=0.003105 Jy/beam
! Clean residual mean=-0.000005 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.48088 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.48088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058721Jy  sigma=1.083014
! Fit after  self-cal, rms=0.058720Jy  sigma=1.082927
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.27618e-05 Jy
! Component: 100  -  total flux cleaned = -6.65688e-05 Jy
! Component: 150  -  total flux cleaned = -0.000114812 Jy
! Component: 200  -  total flux cleaned = -0.000136615 Jy
! Total flux subtracted in 200 components = -0.000136615 Jy
! Clean residual min=-0.002937 max=0.003035 Jy/beam
! Clean residual mean=-0.000005 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.480743 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 94 components and 0.480744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058693Jy  sigma=1.082565
! Fit after  self-cal, rms=0.058693Jy  sigma=1.082533
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058693Jy  sigma=1.082533
! Fit after  self-cal, rms=0.058641Jy  sigma=1.082463
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.513 mas, bmaj=15.87 mas, bpa=0.8313 degrees
! Estimated noise=1.26715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000347009 Jy
! Component: 100  -  total flux cleaned = -0.000383004 Jy
! Component: 150  -  total flux cleaned = -0.000469866 Jy
! Component: 200  -  total flux cleaned = -0.000552503 Jy
! Total flux subtracted in 200 components = -0.000552503 Jy
! Clean residual min=-0.003050 max=0.002688 Jy/beam
! Clean residual mean=-0.000009 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.480191 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 98 components and 0.480191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058642Jy  sigma=1.082388
! Fit after  self-cal, rms=0.058644Jy  sigma=1.082363
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.99104e-05 Jy
! Component: 100  -  total flux cleaned = -0.000151528 Jy
! Component: 150  -  total flux cleaned = -0.000213356 Jy
! Component: 200  -  total flux cleaned = -0.000272371 Jy
! Total flux subtracted in 200 components = -0.000272371 Jy
! Clean residual min=-0.003010 max=0.002614 Jy/beam
! Clean residual mean=-0.000009 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.479919 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 103 components and 0.479919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058649Jy  sigma=1.082388
! Fit after  self-cal, rms=0.058650Jy  sigma=1.082378
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=7.854 mas, bpa=6.596 degrees
! Estimated noise=1.02659 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.257 x 7.854 at 6.596 degrees (North through East)
! Clean map  min=-0.0027374  max=0.41601 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.761 mas, bmaj=6.784 mas, bpa=6.644 degrees
! Estimated noise=1.21799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.319237 Jy
! Component: 100  -  total flux cleaned = 0.398145 Jy
! Component: 150  -  total flux cleaned = 0.429794 Jy
! Component: 200  -  total flux cleaned = 0.446838 Jy
! Total flux subtracted in 200 components = 0.446838 Jy
! Clean residual min=-0.009336 max=0.008528 Jy/beam
! Clean residual mean=-0.000017 rms=0.002144 Jy/beam
! Combined flux in latest and established models = 0.446838 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.446838 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=7.854 mas, bpa=6.596 degrees
! Estimated noise=1.02659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136154 Jy
! Component: 100  -  total flux cleaned = 0.020956 Jy
! Component: 150  -  total flux cleaned = 0.0256585 Jy
! Component: 200  -  total flux cleaned = 0.0277934 Jy
! Total flux subtracted in 200 components = 0.0277934 Jy
! Clean residual min=-0.003858 max=0.003388 Jy/beam
! Clean residual mean=-0.000010 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.474631 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 60 components and 0.474631 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.513 mas, bmaj=15.87 mas, bpa=0.8313 degrees
! Estimated noise=1.26715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286147 Jy
! Component: 100  -  total flux cleaned = 0.00347688 Jy
! Component: 150  -  total flux cleaned = 0.00385807 Jy
! Component: 200  -  total flux cleaned = 0.00412768 Jy
! Total flux subtracted in 200 components = 0.00412768 Jy
! Clean residual min=-0.003156 max=0.002613 Jy/beam
! Clean residual mean=-0.000013 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.478759 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192546 Jy
! Component: 100  -  total flux cleaned = 0.000389931 Jy
! Component: 150  -  total flux cleaned = 0.000503363 Jy
! Component: 200  -  total flux cleaned = 0.000576549 Jy
! Total flux subtracted in 200 components = 0.000576549 Jy
! Clean residual min=-0.002982 max=0.002476 Jy/beam
! Clean residual mean=-0.000011 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.479335 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 0.479335 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.257 mas, bmaj=7.854 mas, bpa=6.596 degrees
! Estimated noise=1.02659 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000241068 Jy
! Component: 100  -  total flux cleaned = 0.000135301 Jy
! Component: 150  -  total flux cleaned = -1.82223e-06 Jy
! Component: 200  -  total flux cleaned = -8.14462e-05 Jy
! Total flux subtracted in 200 components = -8.14462e-05 Jy
! Clean residual min=-0.003038 max=0.003277 Jy/beam
! Clean residual mean=-0.000005 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.479254 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 99 components and 0.479254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058687Jy  sigma=1.082994
! Fit after  self-cal, rms=0.058680Jy  sigma=1.082898
wmodel /J2301-0158_S_map.mod
! wmodel: Unable to open new model file: /J2301-0158_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2301-0158_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.257 x 7.854 at 6.596 degrees (North through East)
! Clean map  min=-0.002863  max=0.41763 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2301-0158_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.417627 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000753105 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.540989 0.540989 1.08198 2.16396 4.32791 8.65583 17.3117 34.6233 69.2466
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.417 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  554.539 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2301-0158_S_dfm.log closed on Fri May 20 00:22:49 2016