! Started logfile: /scr/pima/bg219a_uvs/J2245-0755_X_uvs.log on Wed Apr  6 21:46:59 2016
obs /scr/pima/bg219a_uvs/J2245-0755_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2245-0755_X_uva.fits
! AN table 1: 21 integrations on 10 of 10 possible baselines.
! AN table 2: 21 integrations on 10 of 10 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2245-0755
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5040 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J2245-0755_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.003121Jy  sigma=27.918884
! Fit after  self-cal, rms=0.894888Jy  sigma=24.800461
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8089 mas, bmaj=2.197 mas, bpa=8.256 degrees
! Estimated noise=0.667941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0831712 Jy
! Component: 100  -  total flux cleaned = 0.104155 Jy
! Total flux subtracted in 100 components = 0.104155 Jy
! Clean residual min=-0.005790 max=0.007622 Jy/beam
! Clean residual mean=-0.000004 rms=0.001737 Jy/beam
! Combined flux in latest and established models = 0.104155 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.104155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.051404Jy  sigma=1.290791
! Fit after  self-cal, rms=0.051289Jy  sigma=1.285689
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9891 mas, bmaj=2.601 mas, bpa=6.654 degrees
! Estimated noise=0.491398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00824277 Jy
! Component: 100  -  total flux cleaned = 0.0114438 Jy
! Component: 150  -  total flux cleaned = 0.0127986 Jy
! Component: 200  -  total flux cleaned = 0.0132693 Jy
! Total flux subtracted in 200 components = 0.0132693 Jy
! Clean residual min=-0.002578 max=0.003129 Jy/beam
! Clean residual mean=-0.000001 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.117424 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 26 components and 0.117424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050241Jy  sigma=1.248542
! Fit after  self-cal, rms=0.050274Jy  sigma=1.248421
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9891 x 2.601 at 6.654 degrees (North through East)
! Clean map  min=-0.0022563  max=0.10801 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     NL        1.02     OV        1.03     PT        1.01     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.02     MK        1.08     NL        0.94     OV        0.98     
!   PT        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     NL        0.99     OV        1.01     PT        0.98     
!   SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.96     MK        1.09     NL        0.94     OV        1.06     
!   PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     NL        0.95     OV        1.05     PT        1.02     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.98     MK        1.07     NL        0.96     OV        1.03     
!   PT        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     NL        0.97     OV        1.07     PT        1.03     
!   SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.99     MK        0.93     NL        1.07     OV        1.06     
!   PT        1.01     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     NL        1.02     OV        1.02     PT        1.00     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.02     MK        0.95     NL        0.99     OV        1.09     
!   PT        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     NL        0.97     OV        1.00     PT        1.00     
!   SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.98     MK        1.06     NL        1.00     OV        1.06     
!   PT        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     NL        0.97     OV        0.99     PT        1.05     
!   SC        1.11     
! 
!  Telescope amplitude corrections in sub-array 2:
!   LA        1.07     MK        0.98     NL        0.94     OV        1.05     
!   PT        0.98     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050274Jy  sigma=1.248421
! Fit after  self-cal, rms=0.050630Jy  sigma=1.237021
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.993 mas, bmaj=2.608 mas, bpa=6.761 degrees
! Estimated noise=0.491052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.50254e-05 Jy
! Component: 100  -  total flux cleaned = -4.48305e-05 Jy
! Component: 150  -  total flux cleaned = -4.52226e-05 Jy
! Component: 200  -  total flux cleaned = -6.23144e-05 Jy
! Total flux subtracted in 200 components = -6.23144e-05 Jy
! Clean residual min=-0.002043 max=0.002166 Jy/beam
! Clean residual mean=-0.000000 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.117362 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 30 components and 0.117362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050626Jy  sigma=1.236925
! Fit after  self-cal, rms=0.050641Jy  sigma=1.236717
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050641Jy  sigma=1.236717
! Fit after  self-cal, rms=0.050683Jy  sigma=1.236706
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.993 mas, bmaj=2.608 mas, bpa=6.793 degrees
! Estimated noise=0.490992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.4314e-05 Jy
! Component: 100  -  total flux cleaned = -2.35638e-05 Jy
! Component: 150  -  total flux cleaned = -3.97632e-05 Jy
! Component: 200  -  total flux cleaned = -4.76606e-05 Jy
! Total flux subtracted in 200 components = -4.76606e-05 Jy
! Clean residual min=-0.002043 max=0.002149 Jy/beam
! Clean residual mean=-0.000000 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.117314 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.117314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050680Jy  sigma=1.236633
! Fit after  self-cal, rms=0.050680Jy  sigma=1.236627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.7037e-06 Jy
! Component: 100  -  total flux cleaned = -1.99128e-05 Jy
! Component: 150  -  total flux cleaned = -2.70376e-05 Jy
! Component: 200  -  total flux cleaned = -4.12547e-05 Jy
! Total flux subtracted in 200 components = -4.12547e-05 Jy
! Clean residual min=-0.002042 max=0.002141 Jy/beam
! Clean residual mean=-0.000000 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.117273 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 33 components and 0.117273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050677Jy  sigma=1.236576
! Fit after  self-cal, rms=0.050677Jy  sigma=1.236573
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050677Jy  sigma=1.236573
! Fit after  self-cal, rms=0.050714Jy  sigma=1.236565
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9929 mas, bmaj=2.608 mas, bpa=6.839 degrees
! Estimated noise=0.490956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.00635e-06 Jy
! Component: 100  -  total flux cleaned = -1.54264e-05 Jy
! Component: 150  -  total flux cleaned = -2.93978e-05 Jy
! Component: 200  -  total flux cleaned = -4.27712e-05 Jy
! Total flux subtracted in 200 components = -4.27712e-05 Jy
! Clean residual min=-0.002058 max=0.002137 Jy/beam
! Clean residual mean=-0.000000 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.11723 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 34 components and 0.11723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050712Jy  sigma=1.236517
! Fit after  self-cal, rms=0.050711Jy  sigma=1.236515
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.17096e-06 Jy
! Component: 100  -  total flux cleaned = -1.68048e-05 Jy
! Component: 150  -  total flux cleaned = -2.93649e-05 Jy
! Component: 200  -  total flux cleaned = -3.56094e-05 Jy
! Total flux subtracted in 200 components = -3.56094e-05 Jy
! Clean residual min=-0.002055 max=0.002131 Jy/beam
! Clean residual mean=-0.000000 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.117195 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 35 components and 0.117195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050710Jy  sigma=1.236477
! Fit after  self-cal, rms=0.050709Jy  sigma=1.236476
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050709Jy  sigma=1.236476
! Fit after  self-cal, rms=0.050725Jy  sigma=1.236469
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.291 mas, bmaj=6.599 mas, bpa=-5.512 degrees
! Estimated noise=0.569934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123735 Jy
! Component: 100  -  total flux cleaned = -0.000123662 Jy
! Component: 150  -  total flux cleaned = -0.000123259 Jy
! Component: 200  -  total flux cleaned = -0.000122864 Jy
! Total flux subtracted in 200 components = -0.000122864 Jy
! Clean residual min=-0.001598 max=0.001685 Jy/beam
! Clean residual mean=-0.000001 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.117072 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 39 components and 0.117072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050728Jy  sigma=1.236543
! Fit after  self-cal, rms=0.050726Jy  sigma=1.236477
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.34864e-05 Jy
! Component: 100  -  total flux cleaned = -3.26526e-05 Jy
! Component: 150  -  total flux cleaned = -3.20582e-05 Jy
! Component: 200  -  total flux cleaned = -3.16295e-05 Jy
! Total flux subtracted in 200 components = -3.16295e-05 Jy
! Clean residual min=-0.001597 max=0.001677 Jy/beam
! Clean residual mean=-0.000001 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.11704 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 41 components and 0.11704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050733Jy  sigma=1.236583
! Fit after  self-cal, rms=0.050732Jy  sigma=1.236535
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9926 mas, bmaj=2.608 mas, bpa=6.877 degrees
! Estimated noise=0.490887 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9926 x 2.608 at 6.877 degrees (North through East)
! Clean map  min=-0.0018469  max=0.10738 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8124 mas, bmaj=2.196 mas, bpa=8.28 degrees
! Estimated noise=0.665074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.082813 Jy
! Component: 100  -  total flux cleaned = 0.103794 Jy
! Component: 150  -  total flux cleaned = 0.110973 Jy
! Component: 200  -  total flux cleaned = 0.114113 Jy
! Total flux subtracted in 200 components = 0.114113 Jy
! Clean residual min=-0.003863 max=0.003186 Jy/beam
! Clean residual mean=-0.000001 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.114113 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.114113 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9926 mas, bmaj=2.608 mas, bpa=6.877 degrees
! Estimated noise=0.490887 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224148 Jy
! Component: 100  -  total flux cleaned = 0.00290199 Jy
! Component: 150  -  total flux cleaned = 0.00293342 Jy
! Component: 200  -  total flux cleaned = 0.00295931 Jy
! Total flux subtracted in 200 components = 0.00295931 Jy
! Clean residual min=-0.002087 max=0.002105 Jy/beam
! Clean residual mean=-0.000000 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.117072 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.117072 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.291 mas, bmaj=6.599 mas, bpa=-5.512 degrees
! Estimated noise=0.569934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.91423e-05 Jy
! Component: 100  -  total flux cleaned = 3.84883e-05 Jy
! Component: 150  -  total flux cleaned = 3.79221e-05 Jy
! Component: 200  -  total flux cleaned = 3.74818e-05 Jy
! Total flux subtracted in 200 components = 3.74818e-05 Jy
! Clean residual min=-0.001586 max=0.001651 Jy/beam
! Clean residual mean=-0.000001 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.11711 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.26898e-07 Jy
! Component: 100  -  total flux cleaned = 3.16363e-06 Jy
! Component: 150  -  total flux cleaned = 9.38713e-06 Jy
! Component: 200  -  total flux cleaned = 1.21893e-05 Jy
! Total flux subtracted in 200 components = 1.21893e-05 Jy
! Clean residual min=-0.001570 max=0.001636 Jy/beam
! Clean residual mean=-0.000001 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.117122 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 41 components and 0.117122 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9926 mas, bmaj=2.608 mas, bpa=6.877 degrees
! Estimated noise=0.490887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161536 Jy
! Component: 100  -  total flux cleaned = 0.000161954 Jy
! Component: 150  -  total flux cleaned = 0.000139259 Jy
! Component: 200  -  total flux cleaned = 0.000118455 Jy
! Total flux subtracted in 200 components = 0.000118455 Jy
! Clean residual min=-0.002075 max=0.002113 Jy/beam
! Clean residual mean=-0.000000 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.11724 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.11724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.050722Jy  sigma=1.236451
! Fit after  self-cal, rms=0.050726Jy  sigma=1.236437
wmodel /scr/pima/bg219a_uvs/J2245-0755_X_map.mod
! Writing 50 model components to file: /scr/pima/bg219a_uvs/J2245-0755_X_map.mod
wobs /scr/pima/bg219a_uvs/J2245-0755_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J2245-0755_X_uvs.fits
wwins /scr/pima/bg219a_uvs/J2245-0755_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J2245-0755_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026262 Jy
! Component: 100  -  total flux cleaned = 0.000427634 Jy
! Component: 150  -  total flux cleaned = 0.000581268 Jy
! Component: 200  -  total flux cleaned = 0.000666881 Jy
! Component: 250  -  total flux cleaned = 0.000743923 Jy
! Component: 300  -  total flux cleaned = 0.000792485 Jy
! Component: 350  -  total flux cleaned = 0.000770022 Jy
! Component: 400  -  total flux cleaned = 0.000770616 Jy
! Component: 450  -  total flux cleaned = 0.000750194 Jy
! Component: 500  -  total flux cleaned = 0.000650922 Jy
! Component: 550  -  total flux cleaned = 0.000575427 Jy
! Component: 600  -  total flux cleaned = 0.000575629 Jy
! Component: 650  -  total flux cleaned = 0.000575928 Jy
! Component: 700  -  total flux cleaned = 0.000576209 Jy
! Component: 750  -  total flux cleaned = 0.000624815 Jy
! Component: 800  -  total flux cleaned = 0.000625262 Jy
! Component: 850  -  total flux cleaned = 0.000671908 Jy
! Component: 900  -  total flux cleaned = 0.000582408 Jy
! Component: 950  -  total flux cleaned = 0.000524417 Jy
! Component: 1000  -  total flux cleaned = 0.000425334 Jy
! Component: 1050  -  total flux cleaned = 0.000328388 Jy
! Component: 1100  -  total flux cleaned = 0.000219917 Jy
! Component: 1150  -  total flux cleaned = 8.74978e-05 Jy
! Component: 1200  -  total flux cleaned = 7.43181e-05 Jy
! Component: 1250  -  total flux cleaned = -2.35702e-06 Jy
! Component: 1300  -  total flux cleaned = -7.73476e-05 Jy
! Component: 1350  -  total flux cleaned = -0.000163518 Jy
! Component: 1400  -  total flux cleaned = -0.000284887 Jy
! Component: 1450  -  total flux cleaned = -0.000369037 Jy
! Component: 1500  -  total flux cleaned = -0.0005107 Jy
! Component: 1550  -  total flux cleaned = -0.000557313 Jy
! Component: 1600  -  total flux cleaned = -0.000661034 Jy
! Component: 1650  -  total flux cleaned = -0.000717774 Jy
! Component: 1700  -  total flux cleaned = -0.000796597 Jy
! Component: 1750  -  total flux cleaned = -0.000863497 Jy
! Component: 1800  -  total flux cleaned = -0.000896719 Jy
! Component: 1850  -  total flux cleaned = -0.000929701 Jy
! Component: 1900  -  total flux cleaned = -0.00096246 Jy
! Component: 1950  -  total flux cleaned = -0.00100585 Jy
! Component: 2000  -  total flux cleaned = -0.00102734 Jy
! Component: 2050  -  total flux cleaned = -0.00108091 Jy
! Component: 2100  -  total flux cleaned = -0.00112365 Jy
! Component: 2150  -  total flux cleaned = -0.00116624 Jy
! Component: 2200  -  total flux cleaned = -0.00118742 Jy
! Component: 2250  -  total flux cleaned = -0.00120865 Jy
! Component: 2300  -  total flux cleaned = -0.0012299 Jy
! Component: 2350  -  total flux cleaned = -0.00125107 Jy
! Component: 2400  -  total flux cleaned = -0.0012723 Jy
! Component: 2450  -  total flux cleaned = -0.00129351 Jy
! Component: 2500  -  total flux cleaned = -0.00131475 Jy
! Component: 2550  -  total flux cleaned = -0.00132542 Jy
! Component: 2600  -  total flux cleaned = -0.0013467 Jy
! Component: 2650  -  total flux cleaned = -0.00137876 Jy
! Component: 2700  -  total flux cleaned = -0.00135729 Jy
! Component: 2750  -  total flux cleaned = -0.00137888 Jy
! Component: 2800  -  total flux cleaned = -0.00136814 Jy
! Component: 2850  -  total flux cleaned = -0.00136814 Jy
! Component: 2900  -  total flux cleaned = -0.00136821 Jy
! Component: 2950  -  total flux cleaned = -0.00136821 Jy
! Component: 3000  -  total flux cleaned = -0.00139053 Jy
! Component: 3050  -  total flux cleaned = -0.00137938 Jy
! Component: 3100  -  total flux cleaned = -0.00140208 Jy
! Component: 3150  -  total flux cleaned = -0.0014135 Jy
! Component: 3200  -  total flux cleaned = -0.0014366 Jy
! Component: 3250  -  total flux cleaned = -0.00145995 Jy
! Component: 3300  -  total flux cleaned = -0.00150716 Jy
! Component: 3350  -  total flux cleaned = -0.00151919 Jy
! Component: 3400  -  total flux cleaned = -0.00155524 Jy
! Component: 3450  -  total flux cleaned = -0.00157959 Jy
! Component: 3500  -  total flux cleaned = -0.00159189 Jy
! Component: 3550  -  total flux cleaned = -0.00159181 Jy
! Component: 3600  -  total flux cleaned = -0.00161717 Jy
! Component: 3650  -  total flux cleaned = -0.00161725 Jy
! Component: 3700  -  total flux cleaned = -0.00163057 Jy
! Component: 3750  -  total flux cleaned = -0.0016307 Jy
! Component: 3800  -  total flux cleaned = -0.00164428 Jy
! Component: 3850  -  total flux cleaned = -0.00164419 Jy
! Component: 3900  -  total flux cleaned = -0.00163027 Jy
! Component: 3950  -  total flux cleaned = -0.00160222 Jy
! Component: 4000  -  total flux cleaned = -0.00161635 Jy
! Component: 4050  -  total flux cleaned = -0.00158709 Jy
! Total flux subtracted in 4096 components = -0.00160186 Jy
! Clean residual min=-0.000895 max=0.000911 Jy/beam
! Clean residual mean=-0.000006 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.115638 Jy
keep
! Adding 177 model components to the UV plane model.
! The established model now contains 227 components and 0.115638 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J2245-0755_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9926 x 2.608 at 6.877 degrees (North through East)
! Clean map  min=-0.0020501  max=0.10659 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2245-0755_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.106588 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000247507 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.696629 0.696629 1.39326 2.78652 5.57303 11.1461 22.2921 44.5842 89.1685
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  430.645 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2245-0755_X_uvs.log closed on Wed Apr  6 21:47:03 2016