! Started logfile: /scr/pima/bg219a_uvs/J2225-1113_S_dfm.log on Fri May 20 00:22:13 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2225-1113_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2225-1113_S_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2225-1113
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2225-1113_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001579Jy  sigma=21.791148
! Fit after  self-cal, rms=0.908896Jy  sigma=19.753888
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.649 mas, bmaj=7.057 mas, bpa=10.69 degrees
! Estimated noise=1.41177 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0731739 Jy
! Component: 100  -  total flux cleaned = 0.0900418 Jy
! Total flux subtracted in 100 components = 0.0900418 Jy
! Clean residual min=-0.006865 max=0.006915 Jy/beam
! Clean residual mean=0.000016 rms=0.001802 Jy/beam
! Combined flux in latest and established models = 0.0900418 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0900418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058751Jy  sigma=1.172317
! Fit after  self-cal, rms=0.058686Jy  sigma=1.171021
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.134 mas, bmaj=8.221 mas, bpa=8.101 degrees
! Estimated noise=0.957994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568901 Jy
! Component: 100  -  total flux cleaned = 0.00844908 Jy
! Component: 150  -  total flux cleaned = 0.00996003 Jy
! Component: 200  -  total flux cleaned = 0.0108346 Jy
! Total flux subtracted in 200 components = 0.0108346 Jy
! Clean residual min=-0.004381 max=0.004778 Jy/beam
! Clean residual mean=0.000007 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.100876 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 27 components and 0.100876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058230Jy  sigma=1.157413
! Fit after  self-cal, rms=0.058275Jy  sigma=1.157156
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.134 x 8.221 at 8.101 degrees (North through East)
! Clean map  min=-0.0042633  max=0.090948 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.08     NL        1.02     OV        0.99     
!   PT        1.04     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.92     NL        1.01     OV        1.05     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.06     MK        1.13     NL        1.08     OV        0.93     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.04     MK        0.93     NL        1.04     OV        0.94     
!   PT        0.92     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.058275Jy  sigma=1.157156
! Fit after  self-cal, rms=0.059162Jy  sigma=1.150175
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.138 mas, bmaj=8.258 mas, bpa=8.178 degrees
! Estimated noise=0.958121 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.39504e-05 Jy
! Component: 100  -  total flux cleaned = -6.72947e-05 Jy
! Component: 150  -  total flux cleaned = -2.31331e-05 Jy
! Component: 200  -  total flux cleaned = 1.72561e-05 Jy
! Total flux subtracted in 200 components = 1.72561e-05 Jy
! Clean residual min=-0.003910 max=0.004897 Jy/beam
! Clean residual mean=0.000004 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.100894 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 33 components and 0.100894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059139Jy  sigma=1.149848
! Fit after  self-cal, rms=0.059213Jy  sigma=1.149553
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059213Jy  sigma=1.149553
! Fit after  self-cal, rms=0.059310Jy  sigma=1.142038
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.143 mas, bmaj=8.257 mas, bpa=8.318 degrees
! Estimated noise=0.959975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137128 Jy
! Component: 100  -  total flux cleaned = -0.000157517 Jy
! Component: 150  -  total flux cleaned = -0.000176452 Jy
! Component: 200  -  total flux cleaned = -0.000194681 Jy
! Total flux subtracted in 200 components = -0.000194681 Jy
! Clean residual min=-0.003692 max=0.004747 Jy/beam
! Clean residual mean=0.000006 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 0.100699 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 41 components and 0.100699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059295Jy  sigma=1.141786
! Fit after  self-cal, rms=0.059321Jy  sigma=1.141560
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-37, 119.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00402518 Jy
! Component: 100  -  total flux cleaned = 0.00573669 Jy
! Component: 150  -  total flux cleaned = 0.00638697 Jy
! Component: 200  -  total flux cleaned = 0.00680799 Jy
! Total flux subtracted in 200 components = 0.00680799 Jy
! Clean residual min=-0.003307 max=0.003340 Jy/beam
! Clean residual mean=0.000003 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.107507 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.107507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059013Jy  sigma=1.135326
! Fit after  self-cal, rms=0.058982Jy  sigma=1.134793
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058982Jy  sigma=1.134793
! Fit after  self-cal, rms=0.058815Jy  sigma=1.134037
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.152 mas, bmaj=8.277 mas, bpa=8.31 degrees
! Estimated noise=0.953083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129297 Jy
! Component: 100  -  total flux cleaned = 0.00157437 Jy
! Component: 150  -  total flux cleaned = 0.00176049 Jy
! Component: 200  -  total flux cleaned = 0.00198746 Jy
! Total flux subtracted in 200 components = 0.00198746 Jy
! Clean residual min=-0.002980 max=0.003068 Jy/beam
! Clean residual mean=0.000003 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.109494 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 64 components and 0.109494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058731Jy  sigma=1.132777
! Fit after  self-cal, rms=0.058736Jy  sigma=1.132689
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000338091 Jy
! Component: 100  -  total flux cleaned = 0.000480694 Jy
! Component: 150  -  total flux cleaned = 0.000585051 Jy
! Component: 200  -  total flux cleaned = 0.000730044 Jy
! Total flux subtracted in 200 components = 0.000730044 Jy
! Clean residual min=-0.002922 max=0.002972 Jy/beam
! Clean residual mean=0.000003 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.110225 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 74 components and 0.110225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058705Jy  sigma=1.132272
! Fit after  self-cal, rms=0.058703Jy  sigma=1.132253
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058703Jy  sigma=1.132253
! Fit after  self-cal, rms=0.058676Jy  sigma=1.132089
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.674 mas, bmaj=18.76 mas, bpa=1.224 degrees
! Estimated noise=1.14074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000372098 Jy
! Component: 100  -  total flux cleaned = 0.000504092 Jy
! Component: 150  -  total flux cleaned = 0.000680677 Jy
! Component: 200  -  total flux cleaned = 0.000783233 Jy
! Total flux subtracted in 200 components = 0.000783233 Jy
! Clean residual min=-0.002201 max=0.002638 Jy/beam
! Clean residual mean=0.000005 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.111008 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 83 components and 0.111008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058669Jy  sigma=1.131902
! Fit after  self-cal, rms=0.058671Jy  sigma=1.131862
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172962 Jy
! Component: 100  -  total flux cleaned = 0.000200072 Jy
! Component: 150  -  total flux cleaned = 0.000199694 Jy
! Component: 200  -  total flux cleaned = 0.000200005 Jy
! Total flux subtracted in 200 components = 0.000200005 Jy
! Clean residual min=-0.002205 max=0.002640 Jy/beam
! Clean residual mean=0.000005 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.111208 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 93 components and 0.111208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058668Jy  sigma=1.131819
! Fit after  self-cal, rms=0.058665Jy  sigma=1.131808
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.151 mas, bmaj=8.277 mas, bpa=8.263 degrees
! Estimated noise=0.952096 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.151 x 8.277 at 8.263 degrees (North through East)
! Clean map  min=-0.0024857  max=0.090553 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.66 mas, bmaj=7.095 mas, bpa=10.85 degrees
! Estimated noise=1.40703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0728821 Jy
! Component: 100  -  total flux cleaned = 0.0895388 Jy
! Component: 150  -  total flux cleaned = 0.0957025 Jy
! Component: 200  -  total flux cleaned = 0.0997542 Jy
! Total flux subtracted in 200 components = 0.0997542 Jy
! Clean residual min=-0.005874 max=0.005400 Jy/beam
! Clean residual mean=0.000006 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.0997543 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0997543 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.151 mas, bmaj=8.277 mas, bpa=8.263 degrees
! Estimated noise=0.952096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00410198 Jy
! Component: 100  -  total flux cleaned = 0.0064718 Jy
! Component: 150  -  total flux cleaned = 0.00776654 Jy
! Component: 200  -  total flux cleaned = 0.00824917 Jy
! Total flux subtracted in 200 components = 0.00824917 Jy
! Clean residual min=-0.003550 max=0.002887 Jy/beam
! Clean residual mean=0.000004 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.108003 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 35 components and 0.108003 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.674 mas, bmaj=18.76 mas, bpa=1.224 degrees
! Estimated noise=1.14074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119637 Jy
! Component: 100  -  total flux cleaned = 0.00173574 Jy
! Component: 150  -  total flux cleaned = 0.00215246 Jy
! Component: 200  -  total flux cleaned = 0.00237419 Jy
! Total flux subtracted in 200 components = 0.00237419 Jy
! Clean residual min=-0.002314 max=0.002659 Jy/beam
! Clean residual mean=0.000006 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.110378 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.429e-05 Jy
! Component: 100  -  total flux cleaned = 7.08262e-05 Jy
! Component: 150  -  total flux cleaned = 7.03085e-05 Jy
! Component: 200  -  total flux cleaned = 9.2244e-05 Jy
! Total flux subtracted in 200 components = 9.2244e-05 Jy
! Clean residual min=-0.002208 max=0.002616 Jy/beam
! Clean residual mean=0.000006 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.11047 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 61 components and 0.11047 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.151 mas, bmaj=8.277 mas, bpa=8.263 degrees
! Estimated noise=0.952096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000198317 Jy
! Component: 100  -  total flux cleaned = -0.000117214 Jy
! Component: 150  -  total flux cleaned = -8.10757e-05 Jy
! Component: 200  -  total flux cleaned = -4.75547e-05 Jy
! Total flux subtracted in 200 components = -4.75547e-05 Jy
! Clean residual min=-0.002986 max=0.002868 Jy/beam
! Clean residual mean=0.000003 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.110422 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 80 components and 0.110422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058731Jy  sigma=1.132950
! Fit after  self-cal, rms=0.058707Jy  sigma=1.132635
wmodel /J2225-1113_S_map.mod
! wmodel: Unable to open new model file: /J2225-1113_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2225-1113_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.151 x 8.277 at 8.263 degrees (North through East)
! Clean map  min=-0.0028626  max=0.092127 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2225-1113_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0921271 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000722441 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.35254 2.35254 4.70507 9.41015 18.8203 37.6406 75.2812
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  127.521 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2225-1113_S_dfm.log closed on Fri May 20 00:22:15 2016