! Started logfile: /scr/pima/bg219a_uvs/J2224-1126_S_dfm.log on Fri May 20 00:21:59 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J2224-1126_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J2224-1126_S_uva.fits ! AN table 1: 28 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.833333 visibilities/baseline/integration-bin. ! Found source: J2224-1126 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1400 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2224-1126_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999542Jy sigma=21.086175 ! Fit after self-cal, rms=0.815418Jy sigma=17.111555 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.663 mas, bmaj=7.435 mas, bpa=12.72 degrees ! Estimated noise=1.3018 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141245 Jy ! Component: 100 - total flux cleaned = 0.185675 Jy ! Total flux subtracted in 100 components = 0.185675 Jy ! Clean residual min=-0.021500 max=0.026315 Jy/beam ! Clean residual mean=0.000059 rms=0.005890 Jy/beam ! Combined flux in latest and established models = 0.185675 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.185675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079773Jy sigma=1.668365 ! Fit after self-cal, rms=0.079525Jy sigma=1.664867 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.182 mas, bpa=8.497 degrees ! Estimated noise=0.975925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356752 Jy ! Component: 100 - total flux cleaned = 0.0548026 Jy ! Component: 150 - total flux cleaned = 0.0656829 Jy ! Component: 200 - total flux cleaned = 0.0719159 Jy ! Total flux subtracted in 200 components = 0.0719159 Jy ! Clean residual min=-0.010532 max=0.015401 Jy/beam ! Clean residual mean=0.000012 rms=0.002858 Jy/beam ! Combined flux in latest and established models = 0.257591 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.257591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064035Jy sigma=1.249942 ! Fit after self-cal, rms=0.064044Jy sigma=1.245791 ! Inverting map ! Added new window around map position (-7, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129248 Jy ! Component: 100 - total flux cleaned = 0.017814 Jy ! Component: 150 - total flux cleaned = 0.0188913 Jy ! Component: 200 - total flux cleaned = 0.0196432 Jy ! Total flux subtracted in 200 components = 0.0196432 Jy ! Clean residual min=-0.007552 max=0.006910 Jy/beam ! Clean residual mean=-0.000000 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.277235 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.277234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061219Jy sigma=1.182968 ! Fit after self-cal, rms=0.060997Jy sigma=1.177998 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.182 at 8.497 degrees (North through East) ! Clean map min=-0.0069921 max=0.1816 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 0.93 NL 0.99 OV 1.03 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 1.02 MK 0.95 NL 1.04 OV 1.03 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 1.05 NL 1.02 OV 1.07 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 0.98 MK 0.93 NL 1.01 OV 0.98 ! PT 0.95 SC 0.95 ! ! ! Fit before self-cal, rms=0.060997Jy sigma=1.177998 ! Fit after self-cal, rms=0.058973Jy sigma=1.161728 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=8.127 mas, bpa=8.587 degrees ! Estimated noise=0.962006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.5313e-05 Jy ! Component: 100 - total flux cleaned = -0.000852987 Jy ! Component: 150 - total flux cleaned = -0.00140937 Jy ! Component: 200 - total flux cleaned = -0.00180123 Jy ! Total flux subtracted in 200 components = -0.00180123 Jy ! Clean residual min=-0.005858 max=0.005458 Jy/beam ! Clean residual mean=-0.000002 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 0.275433 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.275433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058551Jy sigma=1.153963 ! Fit after self-cal, rms=0.058521Jy sigma=1.153379 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058521Jy sigma=1.153379 ! Fit after self-cal, rms=0.058173Jy sigma=1.149628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=8.12 mas, bpa=8.763 degrees ! Estimated noise=0.960138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158766 Jy ! Component: 100 - total flux cleaned = -0.000374744 Jy ! Component: 150 - total flux cleaned = -0.000562786 Jy ! Component: 200 - total flux cleaned = -0.000725185 Jy ! Total flux subtracted in 200 components = -0.000725185 Jy ! Clean residual min=-0.005311 max=0.005333 Jy/beam ! Clean residual mean=-0.000001 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.274708 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.274708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058004Jy sigma=1.146810 ! Fit after self-cal, rms=0.058005Jy sigma=1.146648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243134 Jy ! Component: 100 - total flux cleaned = -0.000289858 Jy ! Component: 150 - total flux cleaned = -0.000418901 Jy ! Component: 200 - total flux cleaned = -0.000533494 Jy ! Total flux subtracted in 200 components = -0.000533494 Jy ! Clean residual min=-0.005335 max=0.005206 Jy/beam ! Clean residual mean=-0.000001 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.274175 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.274175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057931Jy sigma=1.145459 ! Fit after self-cal, rms=0.057929Jy sigma=1.145386 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057929Jy sigma=1.145386 ! Fit after self-cal, rms=0.057943Jy sigma=1.145193 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.122 mas, bpa=8.793 degrees ! Estimated noise=0.960494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234793 Jy ! Component: 100 - total flux cleaned = -0.000384416 Jy ! Component: 150 - total flux cleaned = -0.000485318 Jy ! Component: 200 - total flux cleaned = -0.000547717 Jy ! Total flux subtracted in 200 components = -0.000547717 Jy ! Clean residual min=-0.005165 max=0.005234 Jy/beam ! Clean residual mean=-0.000001 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.273627 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.273627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057894Jy sigma=1.144356 ! Fit after self-cal, rms=0.057898Jy sigma=1.144309 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.54907e-05 Jy ! Component: 100 - total flux cleaned = -0.000134379 Jy ! Component: 150 - total flux cleaned = -0.000189227 Jy ! Component: 200 - total flux cleaned = -0.000214815 Jy ! Total flux subtracted in 200 components = -0.000214815 Jy ! Clean residual min=-0.005094 max=0.005199 Jy/beam ! Clean residual mean=-0.000001 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.273412 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.273412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057868Jy sigma=1.143831 ! Fit after self-cal, rms=0.057870Jy sigma=1.143799 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057870Jy sigma=1.143799 ! Fit after self-cal, rms=0.057911Jy sigma=1.143693 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.516 mas, bmaj=18.07 mas, bpa=1.507 degrees ! Estimated noise=1.19514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035282 Jy ! Component: 100 - total flux cleaned = -0.000582246 Jy ! Component: 150 - total flux cleaned = -0.000618969 Jy ! Component: 200 - total flux cleaned = -0.000651726 Jy ! Total flux subtracted in 200 components = -0.000651726 Jy ! Clean residual min=-0.007798 max=0.006668 Jy/beam ! Clean residual mean=-0.000001 rms=0.002125 Jy/beam ! Combined flux in latest and established models = 0.27276 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 110 components and 0.27276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057924Jy sigma=1.143436 ! Fit after self-cal, rms=0.057921Jy sigma=1.143356 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07148e-05 Jy ! Component: 100 - total flux cleaned = 4.29965e-05 Jy ! Component: 150 - total flux cleaned = 6.81836e-05 Jy ! Component: 200 - total flux cleaned = 0.000114695 Jy ! Total flux subtracted in 200 components = 0.000114695 Jy ! Clean residual min=-0.007659 max=0.006646 Jy/beam ! Clean residual mean=-0.000002 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 0.272875 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 118 components and 0.272875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057939Jy sigma=1.143443 ! Fit after self-cal, rms=0.057938Jy sigma=1.143390 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=8.126 mas, bpa=8.828 degrees ! Estimated noise=0.961046 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 8.126 at 8.828 degrees (North through East) ! Clean map min=-0.0047478 max=0.17919 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.645 mas, bmaj=7.4 mas, bpa=12.85 degrees ! Estimated noise=1.27175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137723 Jy ! Component: 100 - total flux cleaned = 0.185176 Jy ! Component: 150 - total flux cleaned = 0.21508 Jy ! Component: 200 - total flux cleaned = 0.234662 Jy ! Total flux subtracted in 200 components = 0.234662 Jy ! Clean residual min=-0.011616 max=0.011270 Jy/beam ! Clean residual mean=0.000026 rms=0.002863 Jy/beam ! Combined flux in latest and established models = 0.234662 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.234662 Jy ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=8.126 mas, bpa=8.828 degrees ! Estimated noise=0.961046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164078 Jy ! Component: 100 - total flux cleaned = 0.025829 Jy ! Component: 150 - total flux cleaned = 0.0316467 Jy ! Component: 200 - total flux cleaned = 0.0348747 Jy ! Total flux subtracted in 200 components = 0.0348747 Jy ! Clean residual min=-0.005696 max=0.004710 Jy/beam ! Clean residual mean=0.000004 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.269536 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.269536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.516 mas, bmaj=18.07 mas, bpa=1.507 degrees ! Estimated noise=1.19514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261484 Jy ! Component: 100 - total flux cleaned = 0.00338225 Jy ! Component: 150 - total flux cleaned = 0.00372613 Jy ! Component: 200 - total flux cleaned = 0.00391222 Jy ! Total flux subtracted in 200 components = 0.00391222 Jy ! Clean residual min=-0.007938 max=0.006614 Jy/beam ! Clean residual mean=-0.000001 rms=0.002169 Jy/beam ! Combined flux in latest and established models = 0.273449 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.54341e-05 Jy ! Component: 100 - total flux cleaned = 6.70805e-05 Jy ! Component: 150 - total flux cleaned = 0.000124484 Jy ! Component: 200 - total flux cleaned = 0.000123826 Jy ! Total flux subtracted in 200 components = 0.000123826 Jy ! Clean residual min=-0.007820 max=0.006580 Jy/beam ! Clean residual mean=-0.000001 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.273572 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 82 components and 0.273573 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=8.126 mas, bpa=8.828 degrees ! Estimated noise=0.961046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00048361 Jy ! Component: 100 - total flux cleaned = -0.00048785 Jy ! Component: 150 - total flux cleaned = -0.0005549 Jy ! Component: 200 - total flux cleaned = -0.000554899 Jy ! Total flux subtracted in 200 components = -0.000554899 Jy ! Clean residual min=-0.005172 max=0.004905 Jy/beam ! Clean residual mean=-0.000000 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.273018 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.273018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057935Jy sigma=1.144037 ! Fit after self-cal, rms=0.057902Jy sigma=1.143265 wmodel /J2224-1126_S_map.mod ! wmodel: Unable to open new model file: /J2224-1126_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J2224-1126_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 8.126 at 8.828 degrees (North through East) ! Clean map min=-0.0049937 max=0.1804 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2224-1126_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.180395 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00128935 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.14421 2.14421 4.28842 8.57685 17.1537 34.3074 68.6148 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.18 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 139.911 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J2224-1126_S_dfm.log closed on Fri May 20 00:22:01 2016