! Started logfile: /scr/pima/bg219a_uvs/J2222-1144_S_dfm.log on Fri May 20 00:21:52 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219a_uvs/J2222-1144_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J2222-1144_S_uva.fits ! AN table 1: 62 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.833333 visibilities/baseline/integration-bin. ! Found source: J2222-1144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 3100 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2222-1144_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010567Jy sigma=21.672962 ! Fit after self-cal, rms=0.867797Jy sigma=18.654013 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=7.277 mas, bpa=11.18 degrees ! Estimated noise=0.843651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104162 Jy ! Component: 100 - total flux cleaned = 0.129368 Jy ! Total flux subtracted in 100 components = 0.129368 Jy ! Clean residual min=-0.005731 max=0.009305 Jy/beam ! Clean residual mean=0.000009 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.129368 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.129368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063042Jy sigma=1.235444 ! Fit after self-cal, rms=0.063055Jy sigma=1.235104 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00895161 Jy ! Component: 100 - total flux cleaned = 0.0121041 Jy ! Total flux subtracted in 100 components = 0.0121041 Jy ! Clean residual min=-0.004032 max=0.004009 Jy/beam ! Clean residual mean=-0.000001 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.141473 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.141473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061919Jy sigma=1.207095 ! Fit after self-cal, rms=0.061927Jy sigma=1.206868 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=8.203 mas, bpa=8.32 degrees ! Estimated noise=0.633951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193001 Jy ! Component: 100 - total flux cleaned = 0.0022718 Jy ! Component: 150 - total flux cleaned = 0.00242977 Jy ! Component: 200 - total flux cleaned = 0.00248579 Jy ! Total flux subtracted in 200 components = 0.00248579 Jy ! Clean residual min=-0.003575 max=0.003490 Jy/beam ! Clean residual mean=-0.000002 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.143958 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.143958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061855Jy sigma=1.205544 ! Fit after self-cal, rms=0.061846Jy sigma=1.205491 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.113 x 8.203 at 8.32 degrees (North through East) ! Clean map min=-0.0033355 max=0.13335 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 1.04 MK 1.14 NL 0.97 OV 1.05 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 1.02 MK 0.96 NL 0.99 OV 1.03 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 1.02 MK 0.95 NL 0.98 OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.00 MK 0.99 NL 0.93 OV 0.99 ! PT 1.00 SC 1.00 ! ! ! Fit before self-cal, rms=0.061846Jy sigma=1.205491 ! Fit after self-cal, rms=0.061047Jy sigma=1.199156 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=8.177 mas, bpa=8.332 degrees ! Estimated noise=0.631741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456927 Jy ! Component: 100 - total flux cleaned = 0.000405578 Jy ! Component: 150 - total flux cleaned = 0.000405242 Jy ! Component: 200 - total flux cleaned = 0.000405492 Jy ! Total flux subtracted in 200 components = 0.000405492 Jy ! Clean residual min=-0.002666 max=0.002854 Jy/beam ! Clean residual mean=0.000003 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.144364 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.144364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061026Jy sigma=1.198770 ! Fit after self-cal, rms=0.061015Jy sigma=1.198657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061015Jy sigma=1.198657 ! Fit after self-cal, rms=0.060865Jy sigma=1.195335 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.162 mas, bpa=8.268 degrees ! Estimated noise=0.631108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000390843 Jy ! Component: 100 - total flux cleaned = 0.000372076 Jy ! Component: 150 - total flux cleaned = 0.000387341 Jy ! Component: 200 - total flux cleaned = 0.000402309 Jy ! Total flux subtracted in 200 components = 0.000402309 Jy ! Clean residual min=-0.002779 max=0.002587 Jy/beam ! Clean residual mean=0.000004 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.144766 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.144766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060855Jy sigma=1.195098 ! Fit after self-cal, rms=0.060862Jy sigma=1.195018 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51639e-05 Jy ! Component: 100 - total flux cleaned = 1.46725e-05 Jy ! Component: 150 - total flux cleaned = 2.87109e-05 Jy ! Component: 200 - total flux cleaned = 4.24954e-05 Jy ! Total flux subtracted in 200 components = 4.24954e-05 Jy ! Clean residual min=-0.002753 max=0.002570 Jy/beam ! Clean residual mean=0.000004 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.144809 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.144809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060856Jy sigma=1.194880 ! Fit after self-cal, rms=0.060854Jy sigma=1.194867 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060854Jy sigma=1.194867 ! Fit after self-cal, rms=0.060744Jy sigma=1.194835 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=8.15 mas, bpa=8.199 degrees ! Estimated noise=0.630701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336207 Jy ! Component: 100 - total flux cleaned = 0.000350068 Jy ! Component: 150 - total flux cleaned = 0.000349982 Jy ! Component: 200 - total flux cleaned = 0.000362471 Jy ! Total flux subtracted in 200 components = 0.000362471 Jy ! Clean residual min=-0.002710 max=0.002560 Jy/beam ! Clean residual mean=0.000004 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.145171 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.145171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060738Jy sigma=1.194677 ! Fit after self-cal, rms=0.060735Jy sigma=1.194668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.39592e-08 Jy ! Component: 100 - total flux cleaned = 2.47196e-05 Jy ! Component: 150 - total flux cleaned = 4.85366e-05 Jy ! Component: 200 - total flux cleaned = 7.2037e-05 Jy ! Total flux subtracted in 200 components = 7.2037e-05 Jy ! Clean residual min=-0.002685 max=0.002551 Jy/beam ! Clean residual mean=0.000004 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.145243 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.145243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060731Jy sigma=1.194564 ! Fit after self-cal, rms=0.060730Jy sigma=1.194558 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060730Jy sigma=1.194558 ! Fit after self-cal, rms=0.060667Jy sigma=1.194537 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.481 mas, bmaj=18.28 mas, bpa=0.9956 degrees ! Estimated noise=0.781041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626808 Jy ! Component: 100 - total flux cleaned = 0.00066745 Jy ! Component: 150 - total flux cleaned = 0.000702872 Jy ! Component: 200 - total flux cleaned = 0.000733773 Jy ! Total flux subtracted in 200 components = 0.000733773 Jy ! Clean residual min=-0.002742 max=0.002168 Jy/beam ! Clean residual mean=0.000008 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.145977 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 49 components and 0.145977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060672Jy sigma=1.194513 ! Fit after self-cal, rms=0.060670Jy sigma=1.194475 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35081e-05 Jy ! Component: 100 - total flux cleaned = 8.47493e-05 Jy ! Component: 150 - total flux cleaned = 0.00010171 Jy ! Component: 200 - total flux cleaned = 0.000123927 Jy ! Total flux subtracted in 200 components = 0.000123927 Jy ! Clean residual min=-0.002749 max=0.002193 Jy/beam ! Clean residual mean=0.000007 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.146101 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.146101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060676Jy sigma=1.194530 ! Fit after self-cal, rms=0.060673Jy sigma=1.194510 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=8.142 mas, bpa=8.134 degrees ! Estimated noise=0.630547 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 8.142 at 8.134 degrees (North through East) ! Clean map min=-0.0024469 max=0.13176 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=7.245 mas, bpa=11.13 degrees ! Estimated noise=0.838642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103465 Jy ! Component: 100 - total flux cleaned = 0.129146 Jy ! Component: 150 - total flux cleaned = 0.138363 Jy ! Component: 200 - total flux cleaned = 0.141919 Jy ! Total flux subtracted in 200 components = 0.141919 Jy ! Clean residual min=-0.003181 max=0.003203 Jy/beam ! Clean residual mean=0.000004 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.141919 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.141919 Jy ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=8.142 mas, bpa=8.134 degrees ! Estimated noise=0.630547 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (85, -104). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333018 Jy ! Component: 100 - total flux cleaned = 0.0046322 Jy ! Component: 150 - total flux cleaned = 0.00466973 Jy ! Component: 200 - total flux cleaned = 0.00479744 Jy ! Total flux subtracted in 200 components = 0.00479744 Jy ! Clean residual min=-0.002389 max=0.002833 Jy/beam ! Clean residual mean=0.000005 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.146717 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 37 components and 0.146717 Jy ! Inverting map ! Added new window around map position (70, 52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216316 Jy ! Component: 100 - total flux cleaned = 0.00210336 Jy ! Component: 150 - total flux cleaned = 0.00241476 Jy ! Component: 200 - total flux cleaned = 0.00272011 Jy ! Total flux subtracted in 200 components = 0.00272011 Jy ! Clean residual min=-0.002392 max=0.001985 Jy/beam ! Clean residual mean=0.000004 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.149437 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.149437 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.481 mas, bmaj=18.28 mas, bpa=0.9956 degrees ! Estimated noise=0.781041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183047 Jy ! Component: 100 - total flux cleaned = 0.000490564 Jy ! Component: 150 - total flux cleaned = 0.000673015 Jy ! Component: 200 - total flux cleaned = 0.00079794 Jy ! Total flux subtracted in 200 components = 0.00079794 Jy ! Clean residual min=-0.001956 max=0.002140 Jy/beam ! Clean residual mean=0.000006 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.150235 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.22632e-05 Jy ! Component: 100 - total flux cleaned = 0.000119929 Jy ! Component: 150 - total flux cleaned = 0.000143533 Jy ! Component: 200 - total flux cleaned = 0.000189206 Jy ! Total flux subtracted in 200 components = 0.000189206 Jy ! Clean residual min=-0.001945 max=0.002085 Jy/beam ! Clean residual mean=0.000006 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.150424 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 86 components and 0.150424 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=8.142 mas, bpa=8.134 degrees ! Estimated noise=0.630547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447084 Jy ! Component: 100 - total flux cleaned = 0.000510494 Jy ! Component: 150 - total flux cleaned = 0.000591734 Jy ! Component: 200 - total flux cleaned = 0.000591455 Jy ! Total flux subtracted in 200 components = 0.000591455 Jy ! Clean residual min=-0.002240 max=0.002025 Jy/beam ! Clean residual mean=0.000003 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.151016 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.151016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060418Jy sigma=1.190491 ! Fit after self-cal, rms=0.060401Jy sigma=1.190010 wmodel /J2222-1144_S_map.mod ! wmodel: Unable to open new model file: /J2222-1144_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219a_uvs/J2222-1144_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 8.142 at 8.134 degrees (North through East) ! Clean map min=-0.0021674 max=0.13151 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2222-1144_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.13151 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000491322 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1208 1.1208 2.24161 4.48322 8.96644 17.9329 35.8657 71.7315 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.131 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 267.664 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J2222-1144_S_dfm.log closed on Fri May 20 00:21:54 2016