! Started logfile: /scr/pima/bg219a_uvs/J2217-1902_X_dfm.log on Fri May 20 00:21:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2217-1902_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2217-1902_X_uva.fits
! AN table 1: 42 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J2217-1902
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6048 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2217-1902_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005946Jy  sigma=26.319122
! Fit after  self-cal, rms=0.925620Jy  sigma=24.071672
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7213 mas, bmaj=1.9 mas, bpa=15.83 degrees
! Estimated noise=0.674985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0544563 Jy
! Component: 100  -  total flux cleaned = 0.0696545 Jy
! Total flux subtracted in 100 components = 0.0696545 Jy
! Clean residual min=-0.007521 max=0.008313 Jy/beam
! Clean residual mean=-0.000006 rms=0.002032 Jy/beam
! Combined flux in latest and established models = 0.0696545 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0696545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058557Jy  sigma=1.422999
! Fit after  self-cal, rms=0.058161Jy  sigma=1.413672
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8935 mas, bmaj=2.308 mas, bpa=14.52 degrees
! Estimated noise=0.364603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014491 Jy
! Component: 100  -  total flux cleaned = 0.0215872 Jy
! Component: 150  -  total flux cleaned = 0.0254879 Jy
! Component: 200  -  total flux cleaned = 0.0276534 Jy
! Total flux subtracted in 200 components = 0.0276534 Jy
! Clean residual min=-0.003686 max=0.006888 Jy/beam
! Clean residual mean=-0.000005 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.0973079 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 0.0973079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055099Jy  sigma=1.310151
! Fit after  self-cal, rms=0.055150Jy  sigma=1.308477
! Inverting map 
! Added new window around map position (-2, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00604545 Jy
! Component: 100  -  total flux cleaned = 0.00841879 Jy
! Component: 150  -  total flux cleaned = 0.00945061 Jy
! Component: 200  -  total flux cleaned = 0.0100682 Jy
! Total flux subtracted in 200 components = 0.0100682 Jy
! Clean residual min=-0.002307 max=0.002702 Jy/beam
! Clean residual mean=-0.000000 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.107376 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 43 components and 0.107376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054520Jy  sigma=1.288788
! Fit after  self-cal, rms=0.054410Jy  sigma=1.286408
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8935 x 2.308 at 14.52 degrees (North through East)
! Clean map  min=-0.002066  max=0.073316 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.06     MK        0.89     NL        1.01     OV        1.02     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        1.04     OV        1.12     
!   PT        0.94     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.17     NL        1.06     OV        0.95     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.02     NL        1.00     OV        1.05     
!   PT        1.03     SC        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.92     NL        1.01     OV        1.04     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.89     NL        0.95     OV        1.01     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.06     MK        0.94     NL        0.96     OV        1.03     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.95     NL        1.05     OV        1.06     
!   PT        1.03     SC        0.90     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.96     NL        1.05     OV        1.03     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.94     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.97     NL        1.07     OV        1.02     
!   PT        0.94     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.054410Jy  sigma=1.286408
! Fit after  self-cal, rms=0.053767Jy  sigma=1.281345
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8897 mas, bmaj=2.294 mas, bpa=14.42 degrees
! Estimated noise=0.363404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00094321 Jy
! Component: 100  -  total flux cleaned = 0.000819498 Jy
! Component: 150  -  total flux cleaned = 0.000721356 Jy
! Component: 200  -  total flux cleaned = 0.000667969 Jy
! Total flux subtracted in 200 components = 0.000667969 Jy
! Clean residual min=-0.001772 max=0.001990 Jy/beam
! Clean residual mean=0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.108044 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 62 components and 0.108044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053693Jy  sigma=1.279770
! Fit after  self-cal, rms=0.053681Jy  sigma=1.279338
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053681Jy  sigma=1.279338
! Fit after  self-cal, rms=0.053774Jy  sigma=1.275323
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.889 mas, bmaj=2.287 mas, bpa=14.73 degrees
! Estimated noise=0.363332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123621 Jy
! Component: 100  -  total flux cleaned = -0.000223652 Jy
! Component: 150  -  total flux cleaned = -0.000305448 Jy
! Component: 200  -  total flux cleaned = -0.000394692 Jy
! Total flux subtracted in 200 components = -0.000394692 Jy
! Clean residual min=-0.001496 max=0.001693 Jy/beam
! Clean residual mean=0.000000 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.107649 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 74 components and 0.107649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053749Jy  sigma=1.274892
! Fit after  self-cal, rms=0.053772Jy  sigma=1.274674
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.2, 21.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110227 Jy
! Component: 100  -  total flux cleaned = 0.00137066 Jy
! Component: 150  -  total flux cleaned = 0.00142617 Jy
! Component: 200  -  total flux cleaned = 0.00140664 Jy
! Total flux subtracted in 200 components = 0.00140664 Jy
! Clean residual min=-0.001208 max=0.001740 Jy/beam
! Clean residual mean=-0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.109056 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.109056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053718Jy  sigma=1.273403
! Fit after  self-cal, rms=0.053710Jy  sigma=1.273213
! Inverting map 
! Added new window around map position (-49, 22.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000793419 Jy
! Component: 100  -  total flux cleaned = 0.000874623 Jy
! Component: 150  -  total flux cleaned = 0.00103074 Jy
! Component: 200  -  total flux cleaned = 0.00116808 Jy
! Total flux subtracted in 200 components = 0.00116808 Jy
! Clean residual min=-0.001223 max=0.001422 Jy/beam
! Clean residual mean=-0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.110224 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 91 components and 0.110224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053641Jy  sigma=1.271988
! Fit after  self-cal, rms=0.053632Jy  sigma=1.271829
! Inverting map 
! Added new window around map position (39.2, 26.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000664971 Jy
! Component: 100  -  total flux cleaned = 0.000599237 Jy
! Component: 150  -  total flux cleaned = 0.000597973 Jy
! Component: 200  -  total flux cleaned = 0.000649061 Jy
! Total flux subtracted in 200 components = 0.000649061 Jy
! Clean residual min=-0.001181 max=0.001154 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.110873 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 105 components and 0.110873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053580Jy  sigma=1.270873
! Fit after  self-cal, rms=0.053575Jy  sigma=1.270761
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053575Jy  sigma=1.270761
! Fit after  self-cal, rms=0.053040Jy  sigma=1.270406
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8878 mas, bmaj=2.282 mas, bpa=14.67 degrees
! Estimated noise=0.360763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000582922 Jy
! Component: 100  -  total flux cleaned = 0.000670602 Jy
! Component: 150  -  total flux cleaned = 0.000719831 Jy
! Component: 200  -  total flux cleaned = 0.000786157 Jy
! Total flux subtracted in 200 components = 0.000786157 Jy
! Clean residual min=-0.001108 max=0.001115 Jy/beam
! Clean residual mean=-0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.111659 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.111659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053007Jy  sigma=1.269776
! Fit after  self-cal, rms=0.053004Jy  sigma=1.269717
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11, -48).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239728 Jy
! Component: 100  -  total flux cleaned = 0.000408811 Jy
! Component: 150  -  total flux cleaned = 0.000482008 Jy
! Component: 200  -  total flux cleaned = 0.000439659 Jy
! Total flux subtracted in 200 components = 0.000439659 Jy
! Clean residual min=-0.000976 max=0.000958 Jy/beam
! Clean residual mean=-0.000001 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.112099 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 129 components and 0.112099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052964Jy  sigma=1.269031
! Fit after  self-cal, rms=0.052959Jy  sigma=1.268957
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052959Jy  sigma=1.268957
! Fit after  self-cal, rms=0.052872Jy  sigma=1.268835
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.125 mas, bmaj=5.718 mas, bpa=2.058 degrees
! Estimated noise=0.446701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000134563 Jy
! Component: 100  -  total flux cleaned = -0.00012249 Jy
! Component: 150  -  total flux cleaned = -0.000100558 Jy
! Component: 200  -  total flux cleaned = -9.10126e-05 Jy
! Total flux subtracted in 200 components = -9.10126e-05 Jy
! Clean residual min=-0.000725 max=0.000481 Jy/beam
! Clean residual mean=-0.000000 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.112008 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 146 components and 0.112008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052868Jy  sigma=1.268709
! Fit after  self-cal, rms=0.052871Jy  sigma=1.268697
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101256 Jy
! Component: 100  -  total flux cleaned = -0.000127338 Jy
! Component: 150  -  total flux cleaned = -0.000142911 Jy
! Component: 200  -  total flux cleaned = -0.000150108 Jy
! Total flux subtracted in 200 components = -0.000150108 Jy
! Clean residual min=-0.000647 max=0.000475 Jy/beam
! Clean residual mean=-0.000000 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.111858 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 153 components and 0.111858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052868Jy  sigma=1.268621
! Fit after  self-cal, rms=0.052867Jy  sigma=1.268617
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8879 mas, bmaj=2.283 mas, bpa=14.71 degrees
! Estimated noise=0.3597 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8879 x 2.283 at 14.71 degrees (North through East)
! Clean map  min=-0.0015672  max=0.073265 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7187 mas, bmaj=1.884 mas, bpa=15.87 degrees
! Estimated noise=0.662212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0536848 Jy
! Component: 100  -  total flux cleaned = 0.0693784 Jy
! Component: 150  -  total flux cleaned = 0.0795013 Jy
! Component: 200  -  total flux cleaned = 0.0866504 Jy
! Total flux subtracted in 200 components = 0.0866504 Jy
! Clean residual min=-0.005487 max=0.005483 Jy/beam
! Clean residual mean=-0.000003 rms=0.001366 Jy/beam
! Combined flux in latest and established models = 0.0866504 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0866504 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8879 mas, bmaj=2.283 mas, bpa=14.71 degrees
! Estimated noise=0.3597 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00799866 Jy
! Component: 100  -  total flux cleaned = 0.0110544 Jy
! Component: 150  -  total flux cleaned = 0.0134988 Jy
! Component: 200  -  total flux cleaned = 0.0155135 Jy
! Total flux subtracted in 200 components = 0.0155135 Jy
! Clean residual min=-0.002297 max=0.002189 Jy/beam
! Clean residual mean=-0.000002 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.102164 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 42 components and 0.102164 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.125 mas, bmaj=5.718 mas, bpa=2.058 degrees
! Estimated noise=0.446701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286825 Jy
! Component: 100  -  total flux cleaned = 0.00446773 Jy
! Component: 150  -  total flux cleaned = 0.00566023 Jy
! Component: 200  -  total flux cleaned = 0.00629276 Jy
! Total flux subtracted in 200 components = 0.00629276 Jy
! Clean residual min=-0.001683 max=0.001206 Jy/beam
! Clean residual mean=-0.000002 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.108457 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000555757 Jy
! Component: 100  -  total flux cleaned = 0.000952532 Jy
! Component: 150  -  total flux cleaned = 0.00136924 Jy
! Component: 200  -  total flux cleaned = 0.00171797 Jy
! Total flux subtracted in 200 components = 0.00171797 Jy
! Clean residual min=-0.001273 max=0.000927 Jy/beam
! Clean residual mean=-0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.110175 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 77 components and 0.110175 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8879 mas, bmaj=2.283 mas, bpa=14.71 degrees
! Estimated noise=0.3597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000804909 Jy
! Component: 100  -  total flux cleaned = 0.00115341 Jy
! Component: 150  -  total flux cleaned = 0.00141395 Jy
! Component: 200  -  total flux cleaned = 0.00169575 Jy
! Total flux subtracted in 200 components = 0.00169575 Jy
! Clean residual min=-0.001407 max=0.001209 Jy/beam
! Clean residual mean=-0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.11187 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.11187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052983Jy  sigma=1.270870
! Fit after  self-cal, rms=0.052967Jy  sigma=1.270410
wmodel /J2217-1902_X_map.mod
! wmodel: Unable to open new model file: /J2217-1902_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2217-1902_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8879 x 2.283 at 14.71 degrees (North through East)
! Clean map  min=-0.0017289  max=0.072942 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2217-1902_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0729416 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000286672 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.17905 1.17905 2.3581 4.7162 9.43239 18.8648 37.7296 75.4591
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.072 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  254.442 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2217-1902_X_dfm.log closed on Fri May 20 00:21:50 2016