! Started logfile: /scr/pima/bg219a_uvs/J2157-1807_X_uvs.log on Wed Apr  6 21:46:21 2016
obs /scr/pima/bg219a_uvs/J2157-1807_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2157-1807_X_uva.fits
! AN table 1: 52 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.666667 visibilities/baseline/integration-bin.
! Found source: J2157-1807
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 2496 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J2157-1807_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.010710Jy  sigma=28.872223
! Fit after  self-cal, rms=0.837630Jy  sigma=24.097406
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.579 mas, bmaj=16.09 mas, bpa=-12.21 degrees
! Estimated noise=0.834812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123503 Jy
! Component: 100  -  total flux cleaned = 0.147866 Jy
! Total flux subtracted in 100 components = 0.147866 Jy
! Clean residual min=-0.017426 max=0.017530 Jy/beam
! Clean residual mean=-0.000101 rms=0.006487 Jy/beam
! Combined flux in latest and established models = 0.147866 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.147866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061016Jy  sigma=1.671055
! Fit after  self-cal, rms=0.060828Jy  sigma=1.667095
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.655 mas, bmaj=17.13 mas, bpa=-12.68 degrees
! Estimated noise=0.678549 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124751 Jy
! Component: 100  -  total flux cleaned = 0.0300275 Jy
! Component: 150  -  total flux cleaned = 0.0453265 Jy
! Component: 200  -  total flux cleaned = 0.0567211 Jy
! Total flux subtracted in 200 components = 0.0567211 Jy
! Clean residual min=-0.010465 max=0.010449 Jy/beam
! Clean residual mean=-0.000057 rms=0.002951 Jy/beam
! Combined flux in latest and established models = 0.204587 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 87 components and 0.204587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.043787Jy  sigma=1.238971
! Fit after  self-cal, rms=0.043377Jy  sigma=1.227332
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.655 x 17.13 at -12.68 degrees (North through East)
! Clean map  min=-0.019842  max=0.1301 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     NL        1.04     OV        1.09     PT        0.93     
! 
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     NL        1.02     OV        1.15     PT        0.89     
! 
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     NL        1.08     OV        1.08     PT        0.91     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     NL        0.96     OV        1.08     PT        0.98     
! 
! 
! Correcting IF 7.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     NL        0.97     OV        1.05     PT        0.91     
! 
! 
! Correcting IF 8.
!  A total of 72 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     NL        0.93     OV        1.06     PT        0.99     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.043377Jy  sigma=1.227332
! Fit after  self-cal, rms=0.039907Jy  sigma=1.204066
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.298 mas, bmaj=14.15 mas, bpa=-12.79 degrees
! Estimated noise=0.799908 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000927824 Jy
! Component: 100  -  total flux cleaned = -0.000537122 Jy
! Component: 150  -  total flux cleaned = -0.000577445 Jy
! Component: 200  -  total flux cleaned = -0.000578039 Jy
! Total flux subtracted in 200 components = -0.000578039 Jy
! Clean residual min=-0.000564 max=0.000567 Jy/beam
! Clean residual mean=0.000002 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.204009 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 145 components and 0.204009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039722Jy  sigma=1.199555
! Fit after  self-cal, rms=0.039724Jy  sigma=1.198940
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039724Jy  sigma=1.198940
! Fit after  self-cal, rms=0.039544Jy  sigma=1.188779
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.298 mas, bmaj=14.15 mas, bpa=-12.8 degrees
! Estimated noise=0.800952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000207754 Jy
! Component: 100  -  total flux cleaned = -0.000185223 Jy
! Component: 150  -  total flux cleaned = -0.000186417 Jy
! Component: 200  -  total flux cleaned = -0.000152343 Jy
! Total flux subtracted in 200 components = -0.000152343 Jy
! Clean residual min=-0.000671 max=0.000709 Jy/beam
! Clean residual mean=0.000005 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.203856 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 201 components and 0.203856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039526Jy  sigma=1.188369
! Fit after  self-cal, rms=0.039533Jy  sigma=1.188265
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000311756 Jy
! Component: 100  -  total flux cleaned = -0.000403996 Jy
! Component: 150  -  total flux cleaned = -0.000405137 Jy
! Component: 200  -  total flux cleaned = -0.000374035 Jy
! Total flux subtracted in 200 components = -0.000374035 Jy
! Clean residual min=-0.000615 max=0.000581 Jy/beam
! Clean residual mean=-0.000003 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.203482 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 231 components and 0.203482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039524Jy  sigma=1.188023
! Fit after  self-cal, rms=0.039523Jy  sigma=1.188012
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039523Jy  sigma=1.188012
! Fit after  self-cal, rms=0.039535Jy  sigma=1.187972
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.298 mas, bmaj=14.16 mas, bpa=-12.8 degrees
! Estimated noise=0.800932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.95026e-05 Jy
! Component: 100  -  total flux cleaned = -2.64814e-05 Jy
! Component: 150  -  total flux cleaned = -6.30876e-06 Jy
! Component: 200  -  total flux cleaned = 5.6333e-05 Jy
! Total flux subtracted in 200 components = 5.6333e-05 Jy
! Clean residual min=-0.000631 max=0.000600 Jy/beam
! Clean residual mean=0.000002 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.203539 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 264 components and 0.203539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039527Jy  sigma=1.187777
! Fit after  self-cal, rms=0.039528Jy  sigma=1.187767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124112 Jy
! Component: 100  -  total flux cleaned = -0.000135085 Jy
! Component: 150  -  total flux cleaned = -0.000116805 Jy
! Component: 200  -  total flux cleaned = -0.000144857 Jy
! Total flux subtracted in 200 components = -0.000144857 Jy
! Clean residual min=-0.000501 max=0.000523 Jy/beam
! Clean residual mean=-0.000002 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.203394 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 289 components and 0.203394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039524Jy  sigma=1.187637
! Fit after  self-cal, rms=0.039523Jy  sigma=1.187630
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039523Jy  sigma=1.187630
! Fit after  self-cal, rms=0.039516Jy  sigma=1.187584
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.447 mas, bmaj=14.1 mas, bpa=-11.7 degrees
! Estimated noise=0.81869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.69738e-05 Jy
! Component: 100  -  total flux cleaned = 0.00010113 Jy
! Component: 150  -  total flux cleaned = 0.000122531 Jy
! Component: 200  -  total flux cleaned = 0.000187131 Jy
! Total flux subtracted in 200 components = 0.000187131 Jy
! Clean residual min=-0.000673 max=0.000664 Jy/beam
! Clean residual mean=0.000003 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.203581 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 302 components and 0.203581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039508Jy  sigma=1.187424
! Fit after  self-cal, rms=0.039510Jy  sigma=1.187411
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00017811 Jy
! Component: 100  -  total flux cleaned = -0.000212391 Jy
! Component: 150  -  total flux cleaned = -0.00021418 Jy
! Component: 200  -  total flux cleaned = -0.0001847 Jy
! Total flux subtracted in 200 components = -0.0001847 Jy
! Clean residual min=-0.000535 max=0.000532 Jy/beam
! Clean residual mean=-0.000002 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.203396 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 331 components and 0.203396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.039505Jy  sigma=1.187281
! Fit after  self-cal, rms=0.039504Jy  sigma=1.187276
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.298 mas, bmaj=14.16 mas, bpa=-12.8 degrees
! Estimated noise=0.800534 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.298 x 14.16 at -12.8 degrees (North through East)
! Clean map  min=-0.01509  max=0.1265 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.262 mas, bmaj=13.45 mas, bpa=-12.32 degrees
! Estimated noise=0.966769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106597 Jy
! Component: 100  -  total flux cleaned = 0.136712 Jy
! Component: 150  -  total flux cleaned = 0.136783 Jy
! Component: 200  -  total flux cleaned = 0.127958 Jy
! Total flux subtracted in 200 components = 0.127958 Jy
! Clean residual min=-0.084785 max=0.091009 Jy/beam
! Clean residual mean=0.000016 rms=0.016443 Jy/beam
! Combined flux in latest and established models = 0.127958 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.127958 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.298 mas, bmaj=14.16 mas, bpa=-12.8 degrees
! Estimated noise=0.800534 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000819242 Jy
! Component: 100  -  total flux cleaned = 0.00187665 Jy
! Component: 150  -  total flux cleaned = 0.00433076 Jy
! Component: 200  -  total flux cleaned = 0.0062915 Jy
! Total flux subtracted in 200 components = 0.0062915 Jy
! Clean residual min=-0.034975 max=0.035057 Jy/beam
! Clean residual mean=0.000102 rms=0.006506 Jy/beam
! Combined flux in latest and established models = 0.134249 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 64 components and 0.134249 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.447 mas, bmaj=14.1 mas, bpa=-11.7 degrees
! Estimated noise=0.81869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150403 Jy
! Component: 100  -  total flux cleaned = 0.000175428 Jy
! Component: 150  -  total flux cleaned = -0.000282525 Jy
! Component: 200  -  total flux cleaned = -0.00155765 Jy
! Total flux subtracted in 200 components = -0.00155765 Jy
! Clean residual min=-0.011828 max=0.012105 Jy/beam
! Clean residual mean=0.000010 rms=0.002335 Jy/beam
! Combined flux in latest and established models = 0.132691 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-51.2, -51.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00888725 Jy
! Component: 100  -  total flux cleaned = 0.00965272 Jy
! Component: 150  -  total flux cleaned = 0.0102433 Jy
! Component: 200  -  total flux cleaned = 0.0112825 Jy
! Total flux subtracted in 200 components = 0.0112825 Jy
! Clean residual min=-0.028944 max=0.017798 Jy/beam
! Clean residual mean=0.000134 rms=0.004729 Jy/beam
! Combined flux in latest and established models = 0.143974 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 106 components and 0.143974 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.298 mas, bmaj=14.16 mas, bpa=-12.8 degrees
! Estimated noise=0.800534 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0102732 Jy
! Component: 100  -  total flux cleaned = -0.00945723 Jy
! Component: 150  -  total flux cleaned = -0.00800657 Jy
! Component: 200  -  total flux cleaned = -0.00701019 Jy
! Total flux subtracted in 200 components = -0.00701019 Jy
! Clean residual min=-0.011264 max=0.016569 Jy/beam
! Clean residual mean=-0.000037 rms=0.002144 Jy/beam
! Combined flux in latest and established models = 0.136964 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 125 components and 0.136964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.041811Jy  sigma=1.257746
! Fit after  self-cal, rms=0.040447Jy  sigma=1.215486
wmodel /scr/pima/bg219a_uvs/J2157-1807_X_map.mod
! Writing 125 model components to file: /scr/pima/bg219a_uvs/J2157-1807_X_map.mod
wobs /scr/pima/bg219a_uvs/J2157-1807_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J2157-1807_X_uvs.fits
wwins /scr/pima/bg219a_uvs/J2157-1807_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J2157-1807_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00150234 Jy
! Component: 100  -  total flux cleaned = -0.00238839 Jy
! Component: 150  -  total flux cleaned = -0.00283456 Jy
! Component: 200  -  total flux cleaned = -0.00316406 Jy
! Component: 250  -  total flux cleaned = -0.00346652 Jy
! Component: 300  -  total flux cleaned = -0.00377537 Jy
! Component: 350  -  total flux cleaned = -0.00391914 Jy
! Component: 400  -  total flux cleaned = -0.00397312 Jy
! Component: 450  -  total flux cleaned = -0.00405092 Jy
! Component: 500  -  total flux cleaned = -0.00410085 Jy
! Component: 550  -  total flux cleaned = -0.00410112 Jy
! Component: 600  -  total flux cleaned = -0.00412503 Jy
! Component: 650  -  total flux cleaned = -0.00414854 Jy
! Component: 700  -  total flux cleaned = -0.00415036 Jy
! Component: 750  -  total flux cleaned = -0.00415105 Jy
! Component: 800  -  total flux cleaned = -0.00415084 Jy
! Component: 850  -  total flux cleaned = -0.00414961 Jy
! Component: 900  -  total flux cleaned = -0.00419215 Jy
! Component: 950  -  total flux cleaned = -0.00423789 Jy
! Component: 1000  -  total flux cleaned = -0.00434523 Jy
! Component: 1050  -  total flux cleaned = -0.00440827 Jy
! Component: 1100  -  total flux cleaned = -0.00447834 Jy
! Component: 1150  -  total flux cleaned = -0.00464176 Jy
! Component: 1200  -  total flux cleaned = -0.00473567 Jy
! Component: 1250  -  total flux cleaned = -0.00495289 Jy
! Component: 1300  -  total flux cleaned = -0.00508086 Jy
! Component: 1350  -  total flux cleaned = -0.00536734 Jy
! Component: 1400  -  total flux cleaned = -0.00553215 Jy
! Component: 1450  -  total flux cleaned = -0.00591497 Jy
! Component: 1500  -  total flux cleaned = -0.00612919 Jy
! Component: 1550  -  total flux cleaned = -0.00663337 Jy
! Component: 1600  -  total flux cleaned = -0.00722861 Jy
! Component: 1650  -  total flux cleaned = -0.00757093 Jy
! Component: 1700  -  total flux cleaned = -0.00835109 Jy
! Component: 1750  -  total flux cleaned = -0.00880658 Jy
! Component: 1800  -  total flux cleaned = -0.00984056 Jy
! Component: 1850  -  total flux cleaned = -0.0104346 Jy
! Component: 1900  -  total flux cleaned = -0.011772 Jy
! Component: 1950  -  total flux cleaned = -0.0133776 Jy
! Component: 2000  -  total flux cleaned = -0.0143081 Jy
! Component: 2050  -  total flux cleaned = -0.0164307 Jy
! Component: 2100  -  total flux cleaned = -0.0189321 Jy
! Component: 2150  -  total flux cleaned = -0.0203752 Jy
! Component: 2200  -  total flux cleaned = -0.0236459 Jy
! Component: 2250  -  total flux cleaned = -0.0255316 Jy
! Component: 2300  -  total flux cleaned = -0.0298692 Jy
! Component: 2350  -  total flux cleaned = -0.0349998 Jy
! Component: 2400  -  total flux cleaned = -0.0378649 Jy
! Component: 2450  -  total flux cleaned = -0.0445535 Jy
! Component: 2500  -  total flux cleaned = -0.0483794 Jy
! Component: 2550  -  total flux cleaned = -0.0571861 Jy
! Component: 2600  -  total flux cleaned = -0.0673987 Jy
! Component: 2650  -  total flux cleaned = -0.0734246 Jy
! Component: 2700  -  total flux cleaned = -0.087024 Jy
! Component: 2750  -  total flux cleaned = -0.0949846 Jy
! Component: 2800  -  total flux cleaned = -0.112923 Jy
! Component: 2850  -  total flux cleaned = -0.134227 Jy
! Component: 2900  -  total flux cleaned = -0.146313 Jy
! Component: 2950  -  total flux cleaned = -0.174216 Jy
! Component: 3000  -  total flux cleaned = -0.19022 Jy
! Component: 3050  -  total flux cleaned = -0.226801 Jy
! Component: 3100  -  total flux cleaned = -0.269664 Jy
! Component: 3150  -  total flux cleaned = -0.294687 Jy
! Component: 3200  -  total flux cleaned = -0.351447 Jy
! Component: 3250  -  total flux cleaned = -0.419694 Jy
! Component: 3300  -  total flux cleaned = -0.45898 Jy
! Component: 3350  -  total flux cleaned = -0.547371 Jy
! Component: 3400  -  total flux cleaned = -0.598518 Jy
! Component: 3450  -  total flux cleaned = -0.714986 Jy
! Component: 3500  -  total flux cleaned = -0.853507 Jy
! Component: 3550  -  total flux cleaned = -0.933302 Jy
! Component: 3600  -  total flux cleaned = -1.11368 Jy
! Component: 3650  -  total flux cleaned = -1.21519 Jy
! Component: 3700  -  total flux cleaned = -1.45293 Jy
! Component: 3750  -  total flux cleaned = -1.73349 Jy
! Component: 3800  -  total flux cleaned = -1.89901 Jy
! Component: 3850  -  total flux cleaned = -2.26757 Jy
! Component: 3900  -  total flux cleaned = -2.47491 Jy
! Component: 3950  -  total flux cleaned = -2.95616 Jy
! Component: 4000  -  total flux cleaned = -3.53129 Jy
! Component: 4050  -  total flux cleaned = -3.85716 Jy
! Total flux subtracted in 4096 components = -4.61197 Jy
! Clean residual min=-21.669180 max=20.617708 Jy/beam
! Clean residual mean=-0.100823 rms=3.695601 Jy/beam
! Combined flux in latest and established models = -4.47501 Jy
keep
! Adding 85 model components to the UV plane model.
! The established model now contains 210 components and -4.47501 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J2157-1807_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.298 x 14.16 at -12.8 degrees (North through East)
! Clean map  min=-15.125  max=29.228 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2157-1807_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 29.2282 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 3.22132 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -33.0637 33.0637 66.1275
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       9.6639 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       29.228 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  9.073 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2157-1807_X_uvs.log closed on Wed Apr  6 21:46:27 2016