! Started logfile: /scr/pima/bg219a_uvs/J2156+8337_X_dfm.log on Fri May 20 00:21:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2156+8337_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2156+8337_X_uva.fits
! AN table 1: 52 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.781136 visibilities/baseline/integration-bin.
! Found source: J2156+8337
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 10236 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2156+8337_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002154Jy  sigma=26.952043
! Fit after  self-cal, rms=0.955947Jy  sigma=25.709832
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5672 mas, bmaj=2.672 mas, bpa=-51.32 degrees
! Estimated noise=0.651232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344139 Jy
! Component: 100  -  total flux cleaned = 0.0435371 Jy
! Total flux subtracted in 100 components = 0.0435371 Jy
! Clean residual min=-0.004633 max=0.007535 Jy/beam
! Clean residual mean=0.000052 rms=0.001334 Jy/beam
! Combined flux in latest and established models = 0.0435371 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0435371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058119Jy  sigma=1.478494
! Fit after  self-cal, rms=0.056611Jy  sigma=1.441325
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7583 mas, bmaj=3.059 mas, bpa=-50.94 degrees
! Estimated noise=0.279235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00979124 Jy
! Component: 100  -  total flux cleaned = 0.0165906 Jy
! Component: 150  -  total flux cleaned = 0.0218349 Jy
! Component: 200  -  total flux cleaned = 0.0260957 Jy
! Total flux subtracted in 200 components = 0.0260957 Jy
! Clean residual min=-0.005138 max=0.009207 Jy/beam
! Clean residual mean=0.000083 rms=0.001591 Jy/beam
! Combined flux in latest and established models = 0.0696328 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 23 components and 0.0696328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054477Jy  sigma=1.374816
! Fit after  self-cal, rms=0.054154Jy  sigma=1.367096
! Inverting map 
! Added new window around map position (-3.4, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0088446 Jy
! Component: 100  -  total flux cleaned = 0.0134427 Jy
! Component: 150  -  total flux cleaned = 0.0169912 Jy
! Component: 200  -  total flux cleaned = 0.0198542 Jy
! Total flux subtracted in 200 components = 0.0198542 Jy
! Clean residual min=-0.003086 max=0.003774 Jy/beam
! Clean residual mean=0.000048 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.089487 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 57 components and 0.089487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052712Jy  sigma=1.318720
! Fit after  self-cal, rms=0.052244Jy  sigma=1.305309
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00487348 Jy
! Component: 100  -  total flux cleaned = 0.00760371 Jy
! Component: 150  -  total flux cleaned = 0.00960058 Jy
! Component: 200  -  total flux cleaned = 0.0108997 Jy
! Total flux subtracted in 200 components = 0.0108997 Jy
! Clean residual min=-0.002837 max=0.002209 Jy/beam
! Clean residual mean=0.000028 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.100387 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 71 components and 0.100387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051785Jy  sigma=1.289897
! Fit after  self-cal, rms=0.051655Jy  sigma=1.285257
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7583 x 3.059 at -50.94 degrees (North through East)
! Clean map  min=-0.0030364  max=0.044266 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.90     MK        1.02     NL        1.02     
!   OV        1.08     PT        1.03     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     LA        0.94     MK        1.05     NL        0.95     
!   OV        1.02     PT        1.03     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.95     MK        1.06     NL        0.96     
!   OV        1.00     PT        1.06     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.97     MK        1.10     NL        0.94     
!   OV        1.07     PT        1.08     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.89     MK        1.00     NL        0.98     
!   OV        1.00     PT        1.07     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        1.00     MK        0.95     NL        0.97     
!   OV        0.98     PT        1.04     SC        1.09     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        0.98     MK        1.00     NL        1.00     
!   OV        0.96     PT        1.06     SC        0.87     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     LA        0.96     MK        1.15     NL        0.93     
!   OV        0.97     PT        1.09     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.89     MK        1.04     NL        0.98     
!   OV        1.13     PT        1.02     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     LA        0.97     MK        1.07     NL        0.95     
!   OV        0.91     PT        0.98     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     LA        1.01     MK        1.03     NL        0.90     
!   OV        1.03     PT        0.98     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     LA        0.97     MK        1.03     NL        0.92     
!   OV        0.94     PT        0.93     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.051655Jy  sigma=1.285257
! Fit after  self-cal, rms=0.051087Jy  sigma=1.279831
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7641 mas, bmaj=3.074 mas, bpa=-51.22 degrees
! Estimated noise=0.272673 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169121 Jy
! Component: 100  -  total flux cleaned = 0.00174118 Jy
! Component: 150  -  total flux cleaned = 0.00182175 Jy
! Component: 200  -  total flux cleaned = 0.00182226 Jy
! Total flux subtracted in 200 components = 0.00182226 Jy
! Clean residual min=-0.002115 max=0.002142 Jy/beam
! Clean residual mean=0.000019 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.102209 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 0.102209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050989Jy  sigma=1.276595
! Fit after  self-cal, rms=0.051076Jy  sigma=1.275053
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051076Jy  sigma=1.275053
! Fit after  self-cal, rms=0.051207Jy  sigma=1.273261
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7639 mas, bmaj=3.068 mas, bpa=-51.22 degrees
! Estimated noise=0.271557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000920411 Jy
! Component: 100  -  total flux cleaned = 0.000994829 Jy
! Component: 150  -  total flux cleaned = 0.000927548 Jy
! Component: 200  -  total flux cleaned = 0.00081034 Jy
! Total flux subtracted in 200 components = 0.00081034 Jy
! Clean residual min=-0.002129 max=0.002002 Jy/beam
! Clean residual mean=0.000015 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.103019 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 109 components and 0.103019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051153Jy  sigma=1.271656
! Fit after  self-cal, rms=0.051182Jy  sigma=1.271115
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115873 Jy
! Component: 100  -  total flux cleaned = 2.44477e-05 Jy
! Component: 150  -  total flux cleaned = -2.92055e-05 Jy
! Component: 200  -  total flux cleaned = -0.000103037 Jy
! Total flux subtracted in 200 components = -0.000103037 Jy
! Clean residual min=-0.002062 max=0.002000 Jy/beam
! Clean residual mean=0.000015 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.102916 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 118 components and 0.102916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051150Jy  sigma=1.270173
! Fit after  self-cal, rms=0.051140Jy  sigma=1.269982
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051140Jy  sigma=1.269982
! Fit after  self-cal, rms=0.050897Jy  sigma=1.269782
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7631 mas, bmaj=3.063 mas, bpa=-51.23 degrees
! Estimated noise=0.269648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156699 Jy
! Component: 100  -  total flux cleaned = 0.000243004 Jy
! Component: 150  -  total flux cleaned = 0.000194566 Jy
! Component: 200  -  total flux cleaned = 0.000127764 Jy
! Total flux subtracted in 200 components = 0.000127764 Jy
! Clean residual min=-0.001958 max=0.001908 Jy/beam
! Clean residual mean=0.000014 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.103044 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 130 components and 0.103044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050870Jy  sigma=1.269025
! Fit after  self-cal, rms=0.050883Jy  sigma=1.268884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.72498e-05 Jy
! Component: 100  -  total flux cleaned = -5.74715e-05 Jy
! Component: 150  -  total flux cleaned = -9.84774e-05 Jy
! Component: 200  -  total flux cleaned = -0.00015521 Jy
! Total flux subtracted in 200 components = -0.00015521 Jy
! Clean residual min=-0.001884 max=0.001873 Jy/beam
! Clean residual mean=0.000014 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.102889 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 139 components and 0.102889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050865Jy  sigma=1.268396
! Fit after  self-cal, rms=0.050860Jy  sigma=1.268085
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050860Jy  sigma=1.268085
! Fit after  self-cal, rms=0.050520Jy  sigma=1.267971
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.881 mas, bmaj=5.471 mas, bpa=-57.17 degrees
! Estimated noise=0.347684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000400924 Jy
! Component: 100  -  total flux cleaned = -0.000541805 Jy
! Component: 150  -  total flux cleaned = -0.000517788 Jy
! Component: 200  -  total flux cleaned = -0.000476148 Jy
! Total flux subtracted in 200 components = -0.000476148 Jy
! Clean residual min=-0.002807 max=0.002222 Jy/beam
! Clean residual mean=0.000038 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.102413 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 144 components and 0.102413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050520Jy  sigma=1.267718
! Fit after  self-cal, rms=0.050498Jy  sigma=1.267267
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.36794e-05 Jy
! Component: 100  -  total flux cleaned = 5.89953e-06 Jy
! Component: 150  -  total flux cleaned = 8.49395e-05 Jy
! Component: 200  -  total flux cleaned = 0.00015465 Jy
! Total flux subtracted in 200 components = 0.00015465 Jy
! Clean residual min=-0.002627 max=0.002160 Jy/beam
! Clean residual mean=0.000037 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.102567 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 150 components and 0.102567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050502Jy  sigma=1.267183
! Fit after  self-cal, rms=0.050494Jy  sigma=1.267064
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7622 mas, bmaj=3.058 mas, bpa=-51.22 degrees
! Estimated noise=0.267799 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7622 x 3.058 at -51.22 degrees (North through East)
! Clean map  min=-0.0024522  max=0.043109 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5708 mas, bmaj=2.665 mas, bpa=-51.45 degrees
! Estimated noise=0.623703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0343824 Jy
! Component: 100  -  total flux cleaned = 0.0479536 Jy
! Component: 150  -  total flux cleaned = 0.0560732 Jy
! Component: 200  -  total flux cleaned = 0.0623177 Jy
! Total flux subtracted in 200 components = 0.0623177 Jy
! Clean residual min=-0.004523 max=0.005297 Jy/beam
! Clean residual mean=0.000036 rms=0.001141 Jy/beam
! Combined flux in latest and established models = 0.0623178 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0623178 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7622 mas, bmaj=3.058 mas, bpa=-51.22 degrees
! Estimated noise=0.267799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00890343 Jy
! Component: 100  -  total flux cleaned = 0.015131 Jy
! Component: 150  -  total flux cleaned = 0.0199202 Jy
! Component: 200  -  total flux cleaned = 0.0236544 Jy
! Total flux subtracted in 200 components = 0.0236544 Jy
! Clean residual min=-0.002752 max=0.003201 Jy/beam
! Clean residual mean=0.000047 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.0859722 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 64 components and 0.0859722 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.881 mas, bmaj=5.471 mas, bpa=-57.17 degrees
! Estimated noise=0.347684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00544268 Jy
! Component: 100  -  total flux cleaned = 0.00881288 Jy
! Component: 150  -  total flux cleaned = 0.0110605 Jy
! Component: 200  -  total flux cleaned = 0.0126588 Jy
! Total flux subtracted in 200 components = 0.0126588 Jy
! Clean residual min=-0.002981 max=0.002330 Jy/beam
! Clean residual mean=0.000056 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.098631 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000956697 Jy
! Component: 100  -  total flux cleaned = 0.0013443 Jy
! Component: 150  -  total flux cleaned = 0.00171344 Jy
! Component: 200  -  total flux cleaned = 0.00204121 Jy
! Total flux subtracted in 200 components = 0.00204121 Jy
! Clean residual min=-0.002764 max=0.002093 Jy/beam
! Clean residual mean=0.000047 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.100672 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 119 components and 0.100672 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7622 mas, bmaj=3.058 mas, bpa=-51.22 degrees
! Estimated noise=0.267799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396496 Jy
! Component: 100  -  total flux cleaned = 0.000385761 Jy
! Component: 150  -  total flux cleaned = 0.000560604 Jy
! Component: 200  -  total flux cleaned = 0.000710563 Jy
! Total flux subtracted in 200 components = 0.000710563 Jy
! Clean residual min=-0.002051 max=0.001853 Jy/beam
! Clean residual mean=0.000017 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.101383 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 141 components and 0.101383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050521Jy  sigma=1.267910
! Fit after  self-cal, rms=0.050469Jy  sigma=1.266657
wmodel /J2156+8337_X_map.mod
! wmodel: Unable to open new model file: /J2156+8337_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2156+8337_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7622 x 3.058 at -51.22 degrees (North through East)
! Clean map  min=-0.0017126  max=0.043091 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2156+8337_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0430908 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000428715 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.98474 2.98474 5.96947 11.9389 23.8779 47.7558 95.5116
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.043 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  100.511 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2156+8337_X_dfm.log closed on Fri May 20 00:21:29 2016