! Started logfile: /scr/pima/bg219a_uvs/J2155+1914_S_dfm.log on Fri May 20 00:21:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2155+1914_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2155+1914_S_uva.fits
! AN table 1: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2155+1914
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2900 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2155+1914_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003585Jy  sigma=24.063213
! Fit after  self-cal, rms=0.909071Jy  sigma=21.723801
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.512 mas, bmaj=6.123 mas, bpa=-3.823 degrees
! Estimated noise=0.872916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.071103 Jy
! Component: 100  -  total flux cleaned = 0.089167 Jy
! Total flux subtracted in 100 components = 0.089167 Jy
! Clean residual min=-0.005708 max=0.007080 Jy/beam
! Clean residual mean=-0.000008 rms=0.001533 Jy/beam
! Combined flux in latest and established models = 0.089167 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.089167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055760Jy  sigma=1.238234
! Fit after  self-cal, rms=0.055734Jy  sigma=1.236109
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.912 mas, bmaj=6.916 mas, bpa=-1.89 degrees
! Estimated noise=0.569442 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00880802 Jy
! Component: 100  -  total flux cleaned = 0.0126275 Jy
! Component: 150  -  total flux cleaned = 0.0141194 Jy
! Component: 200  -  total flux cleaned = 0.0142831 Jy
! Total flux subtracted in 200 components = 0.0142831 Jy
! Clean residual min=-0.002857 max=0.002902 Jy/beam
! Clean residual mean=0.000005 rms=0.000778 Jy/beam
! Combined flux in latest and established models = 0.10345 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.10345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054588Jy  sigma=1.201614
! Fit after  self-cal, rms=0.054641Jy  sigma=1.201133
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.912 x 6.916 at -1.89 degrees (North through East)
! Clean map  min=-0.0027392  max=0.093438 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.04     NL        0.96     OV        1.01     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        0.98     OV        1.02     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.03     NL        0.95     OV        1.01     
!   PT        1.06     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.00     NL        0.94     OV        1.01     
!   PT        1.01     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.054641Jy  sigma=1.201133
! Fit after  self-cal, rms=0.054306Jy  sigma=1.196937
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.923 mas, bmaj=6.905 mas, bpa=-1.877 degrees
! Estimated noise=0.565745 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000633881 Jy
! Component: 100  -  total flux cleaned = -0.000884781 Jy
! Component: 150  -  total flux cleaned = -0.00094327 Jy
! Component: 200  -  total flux cleaned = -0.000969504 Jy
! Total flux subtracted in 200 components = -0.000969504 Jy
! Clean residual min=-0.002467 max=0.002647 Jy/beam
! Clean residual mean=0.000002 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.102481 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 0.102481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054261Jy  sigma=1.195915
! Fit after  self-cal, rms=0.054279Jy  sigma=1.195684
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054279Jy  sigma=1.195684
! Fit after  self-cal, rms=0.054466Jy  sigma=1.192222
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.919 mas, bmaj=6.872 mas, bpa=-1.995 degrees
! Estimated noise=0.565386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136521 Jy
! Component: 100  -  total flux cleaned = 0.000137784 Jy
! Component: 150  -  total flux cleaned = 0.000137347 Jy
! Component: 200  -  total flux cleaned = 0.000119866 Jy
! Total flux subtracted in 200 components = 0.000119866 Jy
! Clean residual min=-0.002361 max=0.002346 Jy/beam
! Clean residual mean=0.000001 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.1026 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 29 components and 0.1026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054445Jy  sigma=1.191805
! Fit after  self-cal, rms=0.054469Jy  sigma=1.191634
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.58766e-05 Jy
! Component: 100  -  total flux cleaned = -7.75448e-05 Jy
! Component: 150  -  total flux cleaned = -0.000106956 Jy
! Component: 200  -  total flux cleaned = -0.000120427 Jy
! Total flux subtracted in 200 components = -0.000120427 Jy
! Clean residual min=-0.002387 max=0.002304 Jy/beam
! Clean residual mean=0.000001 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.10248 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 33 components and 0.10248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054458Jy  sigma=1.191409
! Fit after  self-cal, rms=0.054460Jy  sigma=1.191366
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054460Jy  sigma=1.191366
! Fit after  self-cal, rms=0.054343Jy  sigma=1.191309
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.914 mas, bmaj=6.85 mas, bpa=-1.88 degrees
! Estimated noise=0.565145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000276506 Jy
! Component: 100  -  total flux cleaned = 0.000294218 Jy
! Component: 150  -  total flux cleaned = 0.000254121 Jy
! Component: 200  -  total flux cleaned = 0.000217171 Jy
! Total flux subtracted in 200 components = 0.000217171 Jy
! Clean residual min=-0.002382 max=0.002237 Jy/beam
! Clean residual mean=0.000001 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.102697 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.102697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054331Jy  sigma=1.191133
! Fit after  self-cal, rms=0.054332Jy  sigma=1.191102
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.20369e-05 Jy
! Component: 100  -  total flux cleaned = -4.75936e-05 Jy
! Component: 150  -  total flux cleaned = -6.96636e-05 Jy
! Component: 200  -  total flux cleaned = -9.04668e-05 Jy
! Total flux subtracted in 200 components = -9.04668e-05 Jy
! Clean residual min=-0.002390 max=0.002190 Jy/beam
! Clean residual mean=0.000001 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.102607 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.102607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054326Jy  sigma=1.190991
! Fit after  self-cal, rms=0.054329Jy  sigma=1.190976
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054329Jy  sigma=1.190976
! Fit after  self-cal, rms=0.054156Jy  sigma=1.190926
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.457 mas, bmaj=13.62 mas, bpa=-4.256 degrees
! Estimated noise=0.714726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000389332 Jy
! Component: 100  -  total flux cleaned = 0.000389105 Jy
! Component: 150  -  total flux cleaned = 0.000376636 Jy
! Component: 200  -  total flux cleaned = 0.000360765 Jy
! Total flux subtracted in 200 components = 0.000360765 Jy
! Clean residual min=-0.002244 max=0.002244 Jy/beam
! Clean residual mean=0.000002 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.102967 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 41 components and 0.102967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054153Jy  sigma=1.190893
! Fit after  self-cal, rms=0.054155Jy  sigma=1.190837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.60353e-05 Jy
! Component: 100  -  total flux cleaned = -3.10881e-05 Jy
! Component: 150  -  total flux cleaned = -4.30557e-05 Jy
! Component: 200  -  total flux cleaned = -5.29585e-05 Jy
! Total flux subtracted in 200 components = -5.29585e-05 Jy
! Clean residual min=-0.002253 max=0.002231 Jy/beam
! Clean residual mean=0.000002 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.102915 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.102915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054154Jy  sigma=1.190836
! Fit after  self-cal, rms=0.054158Jy  sigma=1.190814
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.909 mas, bmaj=6.826 mas, bpa=-1.775 degrees
! Estimated noise=0.564447 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.909 x 6.826 at -1.775 degrees (North through East)
! Clean map  min=-0.0022192  max=0.093726 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.511 mas, bmaj=6.046 mas, bpa=-3.608 degrees
! Estimated noise=0.864557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0702728 Jy
! Component: 100  -  total flux cleaned = 0.0889596 Jy
! Component: 150  -  total flux cleaned = 0.0966504 Jy
! Component: 200  -  total flux cleaned = 0.100516 Jy
! Total flux subtracted in 200 components = 0.100516 Jy
! Clean residual min=-0.004327 max=0.003951 Jy/beam
! Clean residual mean=-0.000001 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.100516 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.100516 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.909 mas, bmaj=6.826 mas, bpa=-1.775 degrees
! Estimated noise=0.564447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147852 Jy
! Component: 100  -  total flux cleaned = 0.00192888 Jy
! Component: 150  -  total flux cleaned = 0.00218662 Jy
! Component: 200  -  total flux cleaned = 0.00234685 Jy
! Total flux subtracted in 200 components = 0.00234685 Jy
! Clean residual min=-0.002422 max=0.002512 Jy/beam
! Clean residual mean=0.000001 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.102862 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 36 components and 0.102862 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.457 mas, bmaj=13.62 mas, bpa=-4.256 degrees
! Estimated noise=0.714726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299616 Jy
! Component: 100  -  total flux cleaned = 0.000303968 Jy
! Component: 150  -  total flux cleaned = 0.000281362 Jy
! Component: 200  -  total flux cleaned = 0.000260647 Jy
! Total flux subtracted in 200 components = 0.000260647 Jy
! Clean residual min=-0.002291 max=0.002324 Jy/beam
! Clean residual mean=0.000002 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.103123 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.01817e-06 Jy
! Component: 100  -  total flux cleaned = -1.03037e-05 Jy
! Component: 150  -  total flux cleaned = -1.09018e-05 Jy
! Component: 200  -  total flux cleaned = -1.16424e-05 Jy
! Total flux subtracted in 200 components = -1.16424e-05 Jy
! Clean residual min=-0.002282 max=0.002297 Jy/beam
! Clean residual mean=0.000002 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.103111 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.103111 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.909 mas, bmaj=6.826 mas, bpa=-1.775 degrees
! Estimated noise=0.564447 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.96165e-05 Jy
! Component: 100  -  total flux cleaned = -4.98028e-05 Jy
! Component: 150  -  total flux cleaned = -7.48884e-05 Jy
! Component: 200  -  total flux cleaned = -0.000119357 Jy
! Total flux subtracted in 200 components = -0.000119357 Jy
! Clean residual min=-0.002364 max=0.002336 Jy/beam
! Clean residual mean=0.000001 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.102992 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.102992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054185Jy  sigma=1.191527
! Fit after  self-cal, rms=0.054178Jy  sigma=1.191411
wmodel /J2155+1914_S_map.mod
! wmodel: Unable to open new model file: /J2155+1914_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2155+1914_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.909 x 6.826 at -1.775 degrees (North through East)
! Clean map  min=-0.0022217  max=0.093217 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2155+1914_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.093217 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000573831 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.84676 1.84676 3.69351 7.38703 14.7741 29.5481 59.0962
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.093 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  162.446 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2155+1914_S_dfm.log closed on Fri May 20 00:21:19 2016