! Started logfile: /scr/pima/bg219a_uvs/J2117+0503_X_dfm.log on Fri May 20 00:20:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2117+0503_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2117+0503_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2117+0503
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 4200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2117+0503_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.052357Jy  sigma=27.408911
! Fit after  self-cal, rms=0.679742Jy  sigma=17.680040
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5983 mas, bmaj=1.608 mas, bpa=-0.7333 degrees
! Estimated noise=0.71643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.244899 Jy
! Component: 100  -  total flux cleaned = 0.300353 Jy
! Total flux subtracted in 100 components = 0.300353 Jy
! Clean residual min=-0.011208 max=0.020310 Jy/beam
! Clean residual mean=-0.000009 rms=0.003169 Jy/beam
! Combined flux in latest and established models = 0.300353 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.300353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081205Jy  sigma=2.171576
! Fit after  self-cal, rms=0.081194Jy  sigma=2.170975
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0214618 Jy
! Component: 100  -  total flux cleaned = 0.0317518 Jy
! Total flux subtracted in 100 components = 0.0317518 Jy
! Clean residual min=-0.008045 max=0.007524 Jy/beam
! Clean residual mean=-0.000005 rms=0.001957 Jy/beam
! Combined flux in latest and established models = 0.332105 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.332105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073755Jy  sigma=1.952727
! Fit after  self-cal, rms=0.073748Jy  sigma=1.951875
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7265 mas, bmaj=1.832 mas, bpa=-1.945 degrees
! Estimated noise=0.455391 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115364 Jy
! Component: 100  -  total flux cleaned = 0.0179925 Jy
! Component: 150  -  total flux cleaned = 0.0218968 Jy
! Component: 200  -  total flux cleaned = 0.0242856 Jy
! Total flux subtracted in 200 components = 0.0242856 Jy
! Clean residual min=-0.005964 max=0.007590 Jy/beam
! Clean residual mean=-0.000011 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.35639 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 31 components and 0.35639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072029Jy  sigma=1.901836
! Fit after  self-cal, rms=0.072024Jy  sigma=1.901481
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7265 x 1.832 at -1.945 degrees (North through East)
! Clean map  min=-0.0053708  max=0.32309 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        0.98     OV        1.03     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        0.98     OV        1.05     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        0.99     OV        1.03     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        0.99     OV        1.04     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        0.98     OV        1.05     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.00     OV        1.03     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        0.99     OV        1.04     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        0.99     OV        1.06     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.00     NL        1.00     OV        1.04     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        1.00     OV        1.03     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        0.99     OV        1.06     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        1.00     OV        1.06     
!   PT        0.94     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.072024Jy  sigma=1.901481
! Fit after  self-cal, rms=0.071849Jy  sigma=1.874699
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.729 mas, bmaj=1.836 mas, bpa=-1.995 degrees
! Estimated noise=0.45395 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00039451 Jy
! Component: 100  -  total flux cleaned = -0.000337524 Jy
! Component: 150  -  total flux cleaned = -0.000336192 Jy
! Component: 200  -  total flux cleaned = -0.000334848 Jy
! Total flux subtracted in 200 components = -0.000334848 Jy
! Clean residual min=-0.003307 max=0.003738 Jy/beam
! Clean residual mean=-0.000000 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.356055 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 38 components and 0.356055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071829Jy  sigma=1.874233
! Fit after  self-cal, rms=0.071825Jy  sigma=1.874095
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071825Jy  sigma=1.874095
! Fit after  self-cal, rms=0.071632Jy  sigma=1.867504
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7285 mas, bmaj=1.832 mas, bpa=-1.989 degrees
! Estimated noise=0.453562 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247864 Jy
! Component: 100  -  total flux cleaned = 0.000174907 Jy
! Component: 150  -  total flux cleaned = 0.000136027 Jy
! Component: 200  -  total flux cleaned = 0.000136031 Jy
! Total flux subtracted in 200 components = 0.000136031 Jy
! Clean residual min=-0.002876 max=0.003212 Jy/beam
! Clean residual mean=-0.000000 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.356191 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 40 components and 0.356191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071614Jy  sigma=1.867173
! Fit after  self-cal, rms=0.071615Jy  sigma=1.867130
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, 11.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292725 Jy
! Component: 100  -  total flux cleaned = 0.00379885 Jy
! Component: 150  -  total flux cleaned = 0.00450286 Jy
! Component: 200  -  total flux cleaned = 0.0049593 Jy
! Total flux subtracted in 200 components = 0.0049593 Jy
! Clean residual min=-0.002256 max=0.002190 Jy/beam
! Clean residual mean=0.000000 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.361151 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 54 components and 0.361151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071482Jy  sigma=1.864054
! Fit after  self-cal, rms=0.071477Jy  sigma=1.863950
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071477Jy  sigma=1.863950
! Fit after  self-cal, rms=0.071360Jy  sigma=1.863723
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.728 mas, bmaj=1.832 mas, bpa=-1.997 degrees
! Estimated noise=0.452746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000672977 Jy
! Component: 100  -  total flux cleaned = 0.00101711 Jy
! Component: 150  -  total flux cleaned = 0.00119152 Jy
! Component: 200  -  total flux cleaned = 0.00128144 Jy
! Total flux subtracted in 200 components = 0.00128144 Jy
! Clean residual min=-0.001912 max=0.002113 Jy/beam
! Clean residual mean=0.000000 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.362432 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 63 components and 0.362432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071339Jy  sigma=1.863232
! Fit after  self-cal, rms=0.071338Jy  sigma=1.863201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25.2, 22.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170795 Jy
! Component: 100  -  total flux cleaned = 0.00237215 Jy
! Component: 150  -  total flux cleaned = 0.00271337 Jy
! Component: 200  -  total flux cleaned = 0.00286304 Jy
! Total flux subtracted in 200 components = 0.00286304 Jy
! Clean residual min=-0.001783 max=0.001444 Jy/beam
! Clean residual mean=0.000000 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.365295 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 80 components and 0.365295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071291Jy  sigma=1.862128
! Fit after  self-cal, rms=0.071287Jy  sigma=1.862040
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071287Jy  sigma=1.862040
! Fit after  self-cal, rms=0.071183Jy  sigma=1.861875
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.862 mas, bmaj=3.796 mas, bpa=-4.836 degrees
! Estimated noise=0.641947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000519432 Jy
! Component: 100  -  total flux cleaned = 0.000701486 Jy
! Component: 150  -  total flux cleaned = 0.00083495 Jy
! Component: 200  -  total flux cleaned = 0.000997732 Jy
! Total flux subtracted in 200 components = 0.000997732 Jy
! Clean residual min=-0.001146 max=0.001270 Jy/beam
! Clean residual mean=0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.366293 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 0.366293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071178Jy  sigma=1.861790
! Fit after  self-cal, rms=0.071178Jy  sigma=1.861761
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000401059 Jy
! Component: 100  -  total flux cleaned = 0.000595584 Jy
! Component: 150  -  total flux cleaned = 0.000623098 Jy
! Component: 200  -  total flux cleaned = 0.000654186 Jy
! Total flux subtracted in 200 components = 0.000654186 Jy
! Clean residual min=-0.001125 max=0.001220 Jy/beam
! Clean residual mean=0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.366947 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 101 components and 0.366947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071177Jy  sigma=1.861737
! Fit after  self-cal, rms=0.071177Jy  sigma=1.861729
! Inverting map 
! Added new window around map position (-40.6, 40.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.62725e-05 Jy
! Component: 100  -  total flux cleaned = -0.000109298 Jy
! Component: 150  -  total flux cleaned = -0.000144339 Jy
! Component: 200  -  total flux cleaned = -0.000145124 Jy
! Total flux subtracted in 200 components = -0.000145124 Jy
! Clean residual min=-0.000764 max=0.000782 Jy/beam
! Clean residual mean=0.000001 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.366802 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 124 components and 0.366802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071159Jy  sigma=1.861307
! Fit after  self-cal, rms=0.071158Jy  sigma=1.861270
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.728 mas, bmaj=1.831 mas, bpa=-1.984 degrees
! Estimated noise=0.452223 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.728 x 1.831 at -1.984 degrees (North through East)
! Clean map  min=-0.0011809  max=0.32196 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5989 mas, bmaj=1.605 mas, bpa=-0.7834 degrees
! Estimated noise=0.712977 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.243661 Jy
! Component: 100  -  total flux cleaned = 0.299074 Jy
! Component: 150  -  total flux cleaned = 0.320172 Jy
! Component: 200  -  total flux cleaned = 0.330315 Jy
! Total flux subtracted in 200 components = 0.330315 Jy
! Clean residual min=-0.006514 max=0.006398 Jy/beam
! Clean residual mean=-0.000003 rms=0.001771 Jy/beam
! Combined flux in latest and established models = 0.330315 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.330315 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.728 mas, bmaj=1.831 mas, bpa=-1.984 degrees
! Estimated noise=0.452223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111824 Jy
! Component: 100  -  total flux cleaned = 0.0174086 Jy
! Component: 150  -  total flux cleaned = 0.0213548 Jy
! Component: 200  -  total flux cleaned = 0.0240896 Jy
! Total flux subtracted in 200 components = 0.0240896 Jy
! Clean residual min=-0.002607 max=0.003264 Jy/beam
! Clean residual mean=-0.000003 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.354405 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 46 components and 0.354405 Jy
! Inverting map 
! Added new window around map position (1, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277735 Jy
! Component: 100  -  total flux cleaned = 0.00392102 Jy
! Component: 150  -  total flux cleaned = 0.00473307 Jy
! Component: 200  -  total flux cleaned = 0.00538241 Jy
! Total flux subtracted in 200 components = 0.00538241 Jy
! Clean residual min=-0.001845 max=0.001588 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.359787 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 67 components and 0.359787 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.862 mas, bmaj=3.796 mas, bpa=-4.836 degrees
! Estimated noise=0.641947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016727 Jy
! Component: 100  -  total flux cleaned = 0.00209381 Jy
! Component: 150  -  total flux cleaned = 0.00259122 Jy
! Component: 200  -  total flux cleaned = 0.00289448 Jy
! Total flux subtracted in 200 components = 0.00289448 Jy
! Clean residual min=-0.001106 max=0.001035 Jy/beam
! Clean residual mean=0.000002 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.362682 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302731 Jy
! Component: 100  -  total flux cleaned = 0.00052987 Jy
! Component: 150  -  total flux cleaned = 0.000696402 Jy
! Component: 200  -  total flux cleaned = 0.000830573 Jy
! Total flux subtracted in 200 components = 0.000830573 Jy
! Clean residual min=-0.000957 max=0.000939 Jy/beam
! Clean residual mean=0.000002 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.363512 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 112 components and 0.363513 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.728 mas, bmaj=1.831 mas, bpa=-1.984 degrees
! Estimated noise=0.452223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103779 Jy
! Component: 100  -  total flux cleaned = -2.89326e-05 Jy
! Component: 150  -  total flux cleaned = -2.81446e-05 Jy
! Component: 200  -  total flux cleaned = -5.78497e-05 Jy
! Total flux subtracted in 200 components = -5.78497e-05 Jy
! Clean residual min=-0.001493 max=0.001314 Jy/beam
! Clean residual mean=0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.363455 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 134 components and 0.363455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071145Jy  sigma=1.861017
! Fit after  self-cal, rms=0.071139Jy  sigma=1.860924
wmodel /J2117+0503_X_map.mod
! wmodel: Unable to open new model file: /J2117+0503_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2117+0503_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.728 x 1.831 at -1.984 degrees (North through East)
! Clean map  min=-0.0014147  max=0.32152 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2117+0503_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.321525 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00032676 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.304884 0.304884 0.609769 1.21954 2.43907 4.87815 9.7563 19.5126 39.0252 78.0504
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.321 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  983.979 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2117+0503_X_dfm.log closed on Fri May 20 00:20:54 2016