! Started logfile: /scr/pima/bg219a_uvs/J2050+0407_X_dfm.log on Fri May 20 00:20:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J2050+0407_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2050+0407_X_uva.fits
! AN table 1: 28 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2050+0407
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 4200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2050+0407_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.062927Jy  sigma=27.559872
! Fit after  self-cal, rms=0.690204Jy  sigma=17.517791
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6066 mas, bmaj=1.6 mas, bpa=-2.037 degrees
! Estimated noise=0.644735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.236079 Jy
! Component: 100  -  total flux cleaned = 0.320885 Jy
! Total flux subtracted in 100 components = 0.320885 Jy
! Clean residual min=-0.023203 max=0.035964 Jy/beam
! Clean residual mean=0.000001 rms=0.005750 Jy/beam
! Combined flux in latest and established models = 0.320885 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.320885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111603Jy  sigma=2.940889
! Fit after  self-cal, rms=0.111418Jy  sigma=2.933513
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0391095 Jy
! Component: 100  -  total flux cleaned = 0.0591899 Jy
! Total flux subtracted in 100 components = 0.0591899 Jy
! Clean residual min=-0.013568 max=0.017313 Jy/beam
! Clean residual mean=-0.000001 rms=0.003216 Jy/beam
! Combined flux in latest and established models = 0.380075 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.380075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090653Jy  sigma=2.371527
! Fit after  self-cal, rms=0.090613Jy  sigma=2.369651
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7216 mas, bmaj=1.817 mas, bpa=-2.154 degrees
! Estimated noise=0.462226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228936 Jy
! Component: 100  -  total flux cleaned = 0.0361919 Jy
! Component: 150  -  total flux cleaned = 0.0442622 Jy
! Component: 200  -  total flux cleaned = 0.0491999 Jy
! Total flux subtracted in 200 components = 0.0491999 Jy
! Clean residual min=-0.012424 max=0.021275 Jy/beam
! Clean residual mean=-0.000009 rms=0.004563 Jy/beam
! Combined flux in latest and established models = 0.429275 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 27 components and 0.429275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084500Jy  sigma=2.215730
! Fit after  self-cal, rms=0.084471Jy  sigma=2.214473
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7216 x 1.817 at -2.154 degrees (North through East)
! Clean map  min=-0.011715  max=0.31854 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.01     NL        0.99     OV        1.09     
!   PT        0.90     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        0.98     OV        1.11     
!   PT        0.91     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.01     NL        0.99     OV        1.09     
!   PT        0.91     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        0.99     OV        1.07     
!   PT        0.92     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.99     NL        0.98     OV        1.09     
!   PT        0.91     SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        0.99     OV        1.11     
!   PT        0.90     SC        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.00     OV        1.09     
!   PT        0.89     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.04     NL        0.97     OV        1.09     
!   PT        0.91     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.03     NL        0.99     OV        1.06     
!   PT        0.90     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        0.98     OV        1.08     
!   PT        0.90     SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.01     NL        0.98     OV        1.09     
!   PT        0.91     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.06     NL        0.98     OV        1.09     
!   PT        0.90     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.084471Jy  sigma=2.214473
! Fit after  self-cal, rms=0.083588Jy  sigma=2.116556
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7298 mas, bmaj=1.834 mas, bpa=-2.658 degrees
! Estimated noise=0.466805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149247 Jy
! Component: 100  -  total flux cleaned = 0.0223754 Jy
! Component: 150  -  total flux cleaned = 0.0241158 Jy
! Component: 200  -  total flux cleaned = 0.0246408 Jy
! Total flux subtracted in 200 components = 0.0246408 Jy
! Clean residual min=-0.007359 max=0.009243 Jy/beam
! Clean residual mean=0.000001 rms=0.001900 Jy/beam
! Combined flux in latest and established models = 0.453916 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 44 components and 0.453916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080740Jy  sigma=2.045444
! Fit after  self-cal, rms=0.080540Jy  sigma=2.039583
! Inverting map 
! Added new window around map position (-2.2, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00690604 Jy
! Component: 100  -  total flux cleaned = 0.00934477 Jy
! Component: 150  -  total flux cleaned = 0.011267 Jy
! Component: 200  -  total flux cleaned = 0.0113888 Jy
! Total flux subtracted in 200 components = 0.0113888 Jy
! Clean residual min=-0.005620 max=0.006258 Jy/beam
! Clean residual mean=0.000002 rms=0.001350 Jy/beam
! Combined flux in latest and established models = 0.465305 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 64 components and 0.465305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079483Jy  sigma=2.015207
! Fit after  self-cal, rms=0.079413Jy  sigma=2.013543
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079413Jy  sigma=2.013543
! Fit after  self-cal, rms=0.078041Jy  sigma=1.991495
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7253 mas, bmaj=1.822 mas, bpa=-2.459 degrees
! Estimated noise=0.462787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273328 Jy
! Component: 100  -  total flux cleaned = 0.00446879 Jy
! Component: 150  -  total flux cleaned = 0.00489955 Jy
! Component: 200  -  total flux cleaned = 0.00517083 Jy
! Total flux subtracted in 200 components = 0.00517083 Jy
! Clean residual min=-0.002644 max=0.002927 Jy/beam
! Clean residual mean=0.000000 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.470476 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.470476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077924Jy  sigma=1.988465
! Fit after  self-cal, rms=0.077918Jy  sigma=1.988246
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000890895 Jy
! Component: 100  -  total flux cleaned = 0.00134756 Jy
! Component: 150  -  total flux cleaned = 0.001481 Jy
! Component: 200  -  total flux cleaned = 0.00153869 Jy
! Total flux subtracted in 200 components = 0.00153869 Jy
! Clean residual min=-0.002361 max=0.002776 Jy/beam
! Clean residual mean=0.000001 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.472014 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 98 components and 0.472015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077887Jy  sigma=1.987501
! Fit after  self-cal, rms=0.077884Jy  sigma=1.987442
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077884Jy  sigma=1.987442
! Fit after  self-cal, rms=0.077763Jy  sigma=1.987127
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7248 mas, bmaj=1.822 mas, bpa=-2.471 degrees
! Estimated noise=0.462261 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102981 Jy
! Component: 100  -  total flux cleaned = 0.0015636 Jy
! Component: 150  -  total flux cleaned = 0.00173587 Jy
! Component: 200  -  total flux cleaned = 0.00184428 Jy
! Total flux subtracted in 200 components = 0.00184428 Jy
! Clean residual min=-0.002226 max=0.002691 Jy/beam
! Clean residual mean=0.000000 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.473859 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 109 components and 0.473859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077744Jy  sigma=1.986624
! Fit after  self-cal, rms=0.077742Jy  sigma=1.986588
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (49.2, 17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00254798 Jy
! Component: 100  -  total flux cleaned = 0.00369546 Jy
! Component: 150  -  total flux cleaned = 0.00399665 Jy
! Component: 200  -  total flux cleaned = 0.00410874 Jy
! Total flux subtracted in 200 components = 0.00410874 Jy
! Clean residual min=-0.002200 max=0.002567 Jy/beam
! Clean residual mean=0.000000 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.477968 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 130 components and 0.477968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077659Jy  sigma=1.984552
! Fit after  self-cal, rms=0.077647Jy  sigma=1.984299
! Inverting map 
! Added new window around map position (-45.4, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130341 Jy
! Component: 100  -  total flux cleaned = 0.00139149 Jy
! Component: 150  -  total flux cleaned = 0.0017773 Jy
! Component: 200  -  total flux cleaned = 0.00226826 Jy
! Total flux subtracted in 200 components = 0.00226826 Jy
! Clean residual min=-0.001743 max=0.001746 Jy/beam
! Clean residual mean=0.000000 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.480236 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 147 components and 0.480236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077567Jy  sigma=1.982604
! Fit after  self-cal, rms=0.077565Jy  sigma=1.982509
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077565Jy  sigma=1.982509
! Fit after  self-cal, rms=0.077495Jy  sigma=1.982065
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.916 mas, bmaj=3.687 mas, bpa=-3.223 degrees
! Estimated noise=0.661985 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000931905 Jy
! Component: 100  -  total flux cleaned = 0.00116872 Jy
! Component: 150  -  total flux cleaned = 0.00119948 Jy
! Component: 200  -  total flux cleaned = 0.0013568 Jy
! Total flux subtracted in 200 components = 0.0013568 Jy
! Clean residual min=-0.001775 max=0.001461 Jy/beam
! Clean residual mean=0.000000 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.481593 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 165 components and 0.481592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077484Jy  sigma=1.981731
! Fit after  self-cal, rms=0.077482Jy  sigma=1.981653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128956 Jy
! Component: 100  -  total flux cleaned = 0.000128975 Jy
! Component: 150  -  total flux cleaned = 6.51358e-05 Jy
! Component: 200  -  total flux cleaned = 2.75799e-05 Jy
! Total flux subtracted in 200 components = 2.75799e-05 Jy
! Clean residual min=-0.001595 max=0.001437 Jy/beam
! Clean residual mean=0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.48162 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 173 components and 0.48162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077481Jy  sigma=1.981610
! Fit after  self-cal, rms=0.077480Jy  sigma=1.981580
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7247 mas, bmaj=1.821 mas, bpa=-2.468 degrees
! Estimated noise=0.461947 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7247 x 1.821 at -2.468 degrees (North through East)
! Clean map  min=-0.0033896  max=0.31874 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6075 mas, bmaj=1.599 mas, bpa=-2.372 degrees
! Estimated noise=0.645954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.236192 Jy
! Component: 100  -  total flux cleaned = 0.320606 Jy
! Component: 150  -  total flux cleaned = 0.358879 Jy
! Component: 200  -  total flux cleaned = 0.380085 Jy
! Total flux subtracted in 200 components = 0.380085 Jy
! Clean residual min=-0.009857 max=0.013217 Jy/beam
! Clean residual mean=0.000000 rms=0.002623 Jy/beam
! Combined flux in latest and established models = 0.380085 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.380085 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7247 mas, bmaj=1.821 mas, bpa=-2.468 degrees
! Estimated noise=0.461947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0238251 Jy
! Component: 100  -  total flux cleaned = 0.0394485 Jy
! Component: 150  -  total flux cleaned = 0.05055 Jy
! Component: 200  -  total flux cleaned = 0.0585624 Jy
! Total flux subtracted in 200 components = 0.0585624 Jy
! Clean residual min=-0.005503 max=0.006553 Jy/beam
! Clean residual mean=-0.000002 rms=0.001634 Jy/beam
! Combined flux in latest and established models = 0.438647 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 43 components and 0.438647 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.916 mas, bmaj=3.687 mas, bpa=-3.223 degrees
! Estimated noise=0.661985 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01165 Jy
! Component: 100  -  total flux cleaned = 0.0183027 Jy
! Component: 150  -  total flux cleaned = 0.0231759 Jy
! Component: 200  -  total flux cleaned = 0.0268249 Jy
! Total flux subtracted in 200 components = 0.0268249 Jy
! Clean residual min=-0.004062 max=0.003052 Jy/beam
! Clean residual mean=-0.000003 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.465472 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277883 Jy
! Component: 100  -  total flux cleaned = 0.00494188 Jy
! Component: 150  -  total flux cleaned = 0.00666589 Jy
! Component: 200  -  total flux cleaned = 0.00805024 Jy
! Total flux subtracted in 200 components = 0.00805024 Jy
! Clean residual min=-0.002552 max=0.001847 Jy/beam
! Clean residual mean=-0.000001 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.473522 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 98 components and 0.473522 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7247 mas, bmaj=1.821 mas, bpa=-2.468 degrees
! Estimated noise=0.461947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267652 Jy
! Component: 100  -  total flux cleaned = 0.00418741 Jy
! Component: 150  -  total flux cleaned = 0.00490865 Jy
! Component: 200  -  total flux cleaned = 0.00518233 Jy
! Total flux subtracted in 200 components = 0.00518233 Jy
! Clean residual min=-0.002016 max=0.002240 Jy/beam
! Clean residual mean=0.000000 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.478705 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 122 components and 0.478705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077623Jy  sigma=1.984670
! Fit after  self-cal, rms=0.077597Jy  sigma=1.984017
wmodel /J2050+0407_X_map.mod
! wmodel: Unable to open new model file: /J2050+0407_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2050+0407_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7247 x 1.821 at -2.468 degrees (North through East)
! Clean map  min=-0.0019643  max=0.32017 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2050+0407_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.320172 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000486143 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.455514 0.455514 0.911027 1.82205 3.64411 7.28822 14.5764 29.1529 58.3058
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.32 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  658.597 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2050+0407_X_dfm.log closed on Fri May 20 00:20:16 2016