! Started logfile: /scr/pima/bg219a_uvs/J2034+1154_S_dfm.log on Fri May 20 00:19:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2034+1154_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2034+1154_S_uva.fits
! AN table 1: 48 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J2034+1154
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2034+1154_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.990062Jy  sigma=23.219415
! Fit after  self-cal, rms=0.914940Jy  sigma=21.507203
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.359 mas, bmaj=6.301 mas, bpa=-5.523 degrees
! Estimated noise=0.864268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0615214 Jy
! Component: 100  -  total flux cleaned = 0.0816328 Jy
! Total flux subtracted in 100 components = 0.0816328 Jy
! Clean residual min=-0.008457 max=0.009785 Jy/beam
! Clean residual mean=-0.000134 rms=0.002141 Jy/beam
! Combined flux in latest and established models = 0.0816328 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0816328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061222Jy  sigma=1.309900
! Fit after  self-cal, rms=0.061056Jy  sigma=1.305400
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.887 mas, bmaj=7.027 mas, bpa=-6.7 degrees
! Estimated noise=0.628704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152036 Jy
! Component: 100  -  total flux cleaned = 0.0224488 Jy
! Component: 150  -  total flux cleaned = 0.0262154 Jy
! Component: 200  -  total flux cleaned = 0.0282488 Jy
! Total flux subtracted in 200 components = 0.0282488 Jy
! Clean residual min=-0.005801 max=0.007411 Jy/beam
! Clean residual mean=-0.000274 rms=0.001966 Jy/beam
! Combined flux in latest and established models = 0.109882 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 20 components and 0.109882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057531Jy  sigma=1.214548
! Fit after  self-cal, rms=0.057493Jy  sigma=1.212389
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.887 x 7.027 at -6.7 degrees (North through East)
! Clean map  min=-0.0057873  max=0.086913 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.12     NL        1.01     OV        1.10     
!   PT        0.94     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        0.97     OV        1.12     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.97     NL        0.94     OV        1.04     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        0.99     NL        0.97     OV        1.05     
!   PT        0.94     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.057493Jy  sigma=1.212389
! Fit after  self-cal, rms=0.057108Jy  sigma=1.202455
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.902 mas, bmaj=7.052 mas, bpa=-6.937 degrees
! Estimated noise=0.625435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329083 Jy
! Component: 100  -  total flux cleaned = 0.000299109 Jy
! Component: 150  -  total flux cleaned = 0.00027183 Jy
! Component: 200  -  total flux cleaned = 0.000271998 Jy
! Total flux subtracted in 200 components = 0.000271998 Jy
! Clean residual min=-0.005351 max=0.007666 Jy/beam
! Clean residual mean=-0.000202 rms=0.001724 Jy/beam
! Combined flux in latest and established models = 0.110154 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 26 components and 0.110154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057078Jy  sigma=1.201836
! Fit after  self-cal, rms=0.057093Jy  sigma=1.201415
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057093Jy  sigma=1.201415
! Fit after  self-cal, rms=0.057222Jy  sigma=1.194893
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.901 mas, bmaj=7.101 mas, bpa=-7.204 degrees
! Estimated noise=0.627199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.27993e-05 Jy
! Component: 100  -  total flux cleaned = 7.39148e-05 Jy
! Component: 150  -  total flux cleaned = 4.73412e-05 Jy
! Component: 200  -  total flux cleaned = 2.2856e-05 Jy
! Total flux subtracted in 200 components = 2.2856e-05 Jy
! Clean residual min=-0.004518 max=0.007805 Jy/beam
! Clean residual mean=-0.000175 rms=0.001604 Jy/beam
! Combined flux in latest and established models = 0.110176 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.110176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057186Jy  sigma=1.194376
! Fit after  self-cal, rms=0.057209Jy  sigma=1.194085
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (48.5, -9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00706849 Jy
! Component: 100  -  total flux cleaned = 0.0106841 Jy
! Component: 150  -  total flux cleaned = 0.0127424 Jy
! Component: 200  -  total flux cleaned = 0.0137447 Jy
! Total flux subtracted in 200 components = 0.0137447 Jy
! Clean residual min=-0.003586 max=0.003711 Jy/beam
! Clean residual mean=-0.000074 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.123921 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 61 components and 0.123921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056311Jy  sigma=1.170698
! Fit after  self-cal, rms=0.056221Jy  sigma=1.168430
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056221Jy  sigma=1.168430
! Fit after  self-cal, rms=0.055464Jy  sigma=1.165741
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.908 mas, bmaj=7.125 mas, bpa=-7.099 degrees
! Estimated noise=0.619715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00239989 Jy
! Component: 100  -  total flux cleaned = 0.00332993 Jy
! Component: 150  -  total flux cleaned = 0.00391265 Jy
! Component: 200  -  total flux cleaned = 0.00435189 Jy
! Total flux subtracted in 200 components = 0.00435189 Jy
! Clean residual min=-0.002945 max=0.003307 Jy/beam
! Clean residual mean=-0.000021 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.128273 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 78 components and 0.128273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055312Jy  sigma=1.162230
! Fit after  self-cal, rms=0.055296Jy  sigma=1.161920
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-42.5, -104.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282908 Jy
! Component: 100  -  total flux cleaned = 0.00289302 Jy
! Component: 150  -  total flux cleaned = 0.0033253 Jy
! Component: 200  -  total flux cleaned = 0.00370403 Jy
! Total flux subtracted in 200 components = 0.00370403 Jy
! Clean residual min=-0.002500 max=0.002188 Jy/beam
! Clean residual mean=-0.000013 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.131977 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 98 components and 0.131977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055110Jy  sigma=1.157838
! Fit after  self-cal, rms=0.055087Jy  sigma=1.157559
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055087Jy  sigma=1.157559
! Fit after  self-cal, rms=0.054935Jy  sigma=1.156847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.9 mas, bmaj=13 mas, bpa=-5.342 degrees
! Estimated noise=0.785854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127382 Jy
! Component: 100  -  total flux cleaned = 0.00210659 Jy
! Component: 150  -  total flux cleaned = 0.00250515 Jy
! Component: 200  -  total flux cleaned = 0.00271136 Jy
! Total flux subtracted in 200 components = 0.00271136 Jy
! Clean residual min=-0.002301 max=0.002006 Jy/beam
! Clean residual mean=0.000007 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.134688 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 110 components and 0.134688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054912Jy  sigma=1.156403
! Fit after  self-cal, rms=0.054909Jy  sigma=1.156288
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000392571 Jy
! Component: 100  -  total flux cleaned = 0.000502784 Jy
! Component: 150  -  total flux cleaned = 0.00060491 Jy
! Component: 200  -  total flux cleaned = 0.000699952 Jy
! Total flux subtracted in 200 components = 0.000699952 Jy
! Clean residual min=-0.002188 max=0.001996 Jy/beam
! Clean residual mean=0.000014 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.135388 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 115 components and 0.135388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054897Jy  sigma=1.156096
! Fit after  self-cal, rms=0.054892Jy  sigma=1.156068
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.917 mas, bmaj=7.142 mas, bpa=-7.132 degrees
! Estimated noise=0.615519 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.917 x 7.142 at -7.132 degrees (North through East)
! Clean map  min=-0.0021149  max=0.087152 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.374 mas, bmaj=6.354 mas, bpa=-5.834 degrees
! Estimated noise=0.857993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0605135 Jy
! Component: 100  -  total flux cleaned = 0.0814971 Jy
! Component: 150  -  total flux cleaned = 0.0932001 Jy
! Component: 200  -  total flux cleaned = 0.101077 Jy
! Total flux subtracted in 200 components = 0.101077 Jy
! Clean residual min=-0.005349 max=0.005812 Jy/beam
! Clean residual mean=-0.000070 rms=0.001473 Jy/beam
! Combined flux in latest and established models = 0.101077 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.101077 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.917 mas, bmaj=7.142 mas, bpa=-7.132 degrees
! Estimated noise=0.615519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744265 Jy
! Component: 100  -  total flux cleaned = 0.0127441 Jy
! Component: 150  -  total flux cleaned = 0.0168378 Jy
! Component: 200  -  total flux cleaned = 0.0201067 Jy
! Total flux subtracted in 200 components = 0.0201067 Jy
! Clean residual min=-0.003662 max=0.003300 Jy/beam
! Clean residual mean=-0.000081 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.121183 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 43 components and 0.121183 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.9 mas, bmaj=13 mas, bpa=-5.342 degrees
! Estimated noise=0.785854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425033 Jy
! Component: 100  -  total flux cleaned = 0.0070216 Jy
! Component: 150  -  total flux cleaned = 0.00903063 Jy
! Component: 200  -  total flux cleaned = 0.010565 Jy
! Total flux subtracted in 200 components = 0.010565 Jy
! Clean residual min=-0.002778 max=0.002151 Jy/beam
! Clean residual mean=-0.000049 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.131748 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120628 Jy
! Component: 100  -  total flux cleaned = 0.00184978 Jy
! Component: 150  -  total flux cleaned = 0.00217277 Jy
! Component: 200  -  total flux cleaned = 0.00243494 Jy
! Total flux subtracted in 200 components = 0.00243494 Jy
! Clean residual min=-0.002554 max=0.001898 Jy/beam
! Clean residual mean=-0.000020 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.134183 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 83 components and 0.134183 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.917 mas, bmaj=7.142 mas, bpa=-7.132 degrees
! Estimated noise=0.615519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00091061 Jy
! Component: 100  -  total flux cleaned = 0.0011506 Jy
! Component: 150  -  total flux cleaned = 0.00119868 Jy
! Component: 200  -  total flux cleaned = 0.00119759 Jy
! Total flux subtracted in 200 components = 0.00119759 Jy
! Clean residual min=-0.002144 max=0.002253 Jy/beam
! Clean residual mean=0.000000 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.135381 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 101 components and 0.135381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054952Jy  sigma=1.157051
! Fit after  self-cal, rms=0.054943Jy  sigma=1.156656
wmodel /J2034+1154_S_map.mod
! wmodel: Unable to open new model file: /J2034+1154_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2034+1154_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.917 x 7.142 at -7.132 degrees (North through East)
! Clean map  min=-0.0019694  max=0.08632 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2034+1154_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0863198 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000552207 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.91917 1.91917 3.83833 7.67666 15.3533 30.7067 61.4133
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.086 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  156.317 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2034+1154_S_dfm.log closed on Fri May 20 00:19:52 2016