! Started logfile: /scr/pima/bg219a_uvs/J2031+1219_S_dfm.log on Fri May 20 00:19:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J2031+1219_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J2031+1219_S_uva.fits
! AN table 1: 39 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.632479 visibilities/baseline/integration-bin.
! Found source: J2031+1219
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1480 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2031+1219_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.325307Jy  sigma=18.581093
! Fit after  self-cal, rms=0.098777Jy  sigma=1.301885
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.568 mas, bmaj=6.563 mas, bpa=-6.259 degrees
! Estimated noise=1.94639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.77995 Jy
! Component: 100  -  total flux cleaned = 0.950088 Jy
! Total flux subtracted in 100 components = 0.950088 Jy
! Clean residual min=-0.023545 max=0.049078 Jy/beam
! Clean residual mean=-0.000172 rms=0.007651 Jy/beam
! Combined flux in latest and established models = 0.950088 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.950088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119532Jy  sigma=1.634867
! Fit after  self-cal, rms=0.119527Jy  sigma=1.634833
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0510045 Jy
! Component: 100  -  total flux cleaned = 0.0743609 Jy
! Total flux subtracted in 100 components = 0.0743609 Jy
! Clean residual min=-0.014701 max=0.016597 Jy/beam
! Clean residual mean=-0.000100 rms=0.004035 Jy/beam
! Combined flux in latest and established models = 1.02445 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 1.02445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088524Jy  sigma=1.162483
! Fit after  self-cal, rms=0.088452Jy  sigma=1.161675
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.422 mas, bmaj=8.22 mas, bpa=-5.068 degrees
! Estimated noise=1.33837 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157471 Jy
! Component: 100  -  total flux cleaned = 0.0219686 Jy
! Component: 150  -  total flux cleaned = 0.022985 Jy
! Component: 200  -  total flux cleaned = 0.0229934 Jy
! Total flux subtracted in 200 components = 0.0229934 Jy
! Clean residual min=-0.010047 max=0.010748 Jy/beam
! Clean residual mean=0.000013 rms=0.002622 Jy/beam
! Combined flux in latest and established models = 1.04744 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 31 components and 1.04744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085438Jy  sigma=1.128251
! Fit after  self-cal, rms=0.085425Jy  sigma=1.128138
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.422 x 8.22 at -5.068 degrees (North through East)
! Clean map  min=-0.0097344  max=1.0147 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.02     NL        0.98     OV        1.01     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.00     NL        1.00     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.99     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.085425Jy  sigma=1.128138
! Fit after  self-cal, rms=0.082997Jy  sigma=1.072388
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.431 mas, bmaj=7.937 mas, bpa=-3.494 degrees
! Estimated noise=1.42222 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181506 Jy
! Component: 100  -  total flux cleaned = 0.00188509 Jy
! Component: 150  -  total flux cleaned = 0.0019475 Jy
! Component: 200  -  total flux cleaned = 0.00200528 Jy
! Total flux subtracted in 200 components = 0.00200528 Jy
! Clean residual min=-0.007092 max=0.007989 Jy/beam
! Clean residual mean=0.000017 rms=0.001805 Jy/beam
! Combined flux in latest and established models = 1.04945 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 38 components and 1.04945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082813Jy  sigma=1.070875
! Fit after  self-cal, rms=0.082793Jy  sigma=1.070692
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082793Jy  sigma=1.070692
! Fit after  self-cal, rms=0.078280Jy  sigma=1.022322
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=7.939 mas, bpa=-3.56 degrees
! Estimated noise=1.42216 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.29249e-05 Jy
! Component: 100  -  total flux cleaned = 4.91642e-05 Jy
! Component: 150  -  total flux cleaned = 4.75664e-05 Jy
! Component: 200  -  total flux cleaned = 9.37121e-05 Jy
! Total flux subtracted in 200 components = 9.37121e-05 Jy
! Clean residual min=-0.004305 max=0.004470 Jy/beam
! Clean residual mean=-0.000006 rms=0.001118 Jy/beam
! Combined flux in latest and established models = 1.04954 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 41 components and 1.04954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078136Jy  sigma=1.021172
! Fit after  self-cal, rms=0.078126Jy  sigma=1.021029
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000248872 Jy
! Component: 100  -  total flux cleaned = 0.00020385 Jy
! Component: 150  -  total flux cleaned = 0.000203956 Jy
! Component: 200  -  total flux cleaned = 0.000165894 Jy
! Total flux subtracted in 200 components = 0.000165894 Jy
! Clean residual min=-0.004314 max=0.004349 Jy/beam
! Clean residual mean=-0.000005 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 1.04971 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 43 components and 1.04971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078070Jy  sigma=1.020500
! Fit after  self-cal, rms=0.078066Jy  sigma=1.020440
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078066Jy  sigma=1.020440
! Fit after  self-cal, rms=0.078128Jy  sigma=1.020072
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=7.941 mas, bpa=-3.608 degrees
! Estimated noise=1.4218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.55074e-05 Jy
! Component: 100  -  total flux cleaned = -0.00014571 Jy
! Component: 150  -  total flux cleaned = -0.000144991 Jy
! Component: 200  -  total flux cleaned = -0.00011379 Jy
! Total flux subtracted in 200 components = -0.00011379 Jy
! Clean residual min=-0.004460 max=0.004290 Jy/beam
! Clean residual mean=-0.000009 rms=0.001076 Jy/beam
! Combined flux in latest and established models = 1.04959 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 44 components and 1.04959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078055Jy  sigma=1.019619
! Fit after  self-cal, rms=0.078052Jy  sigma=1.019573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162698 Jy
! Component: 100  -  total flux cleaned = 0.000162439 Jy
! Component: 150  -  total flux cleaned = 0.000162285 Jy
! Component: 200  -  total flux cleaned = 0.00016168 Jy
! Total flux subtracted in 200 components = 0.00016168 Jy
! Clean residual min=-0.004483 max=0.004206 Jy/beam
! Clean residual mean=-0.000008 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 1.04975 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 44 components and 1.04975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078030Jy  sigma=1.019366
! Fit after  self-cal, rms=0.078029Jy  sigma=1.019340
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078029Jy  sigma=1.019340
! Fit after  self-cal, rms=0.078084Jy  sigma=1.019107
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.487 mas, bmaj=12.96 mas, bpa=1.677 degrees
! Estimated noise=1.67036 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101731 Jy
! Component: 100  -  total flux cleaned = -0.000170072 Jy
! Component: 150  -  total flux cleaned = -0.000122394 Jy
! Component: 200  -  total flux cleaned = -6.26157e-05 Jy
! Total flux subtracted in 200 components = -6.26157e-05 Jy
! Clean residual min=-0.004898 max=0.004178 Jy/beam
! Clean residual mean=-0.000021 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 1.04969 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 48 components and 1.04969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078056Jy  sigma=1.019114
! Fit after  self-cal, rms=0.078049Jy  sigma=1.019077
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179783 Jy
! Component: 100  -  total flux cleaned = 0.000146451 Jy
! Component: 150  -  total flux cleaned = 0.000134603 Jy
! Component: 200  -  total flux cleaned = 0.000152802 Jy
! Total flux subtracted in 200 components = 0.000152802 Jy
! Clean residual min=-0.004924 max=0.004125 Jy/beam
! Clean residual mean=-0.000019 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 1.04985 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 50 components and 1.04985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078048Jy  sigma=1.019216
! Fit after  self-cal, rms=0.078042Jy  sigma=1.019191
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.432 mas, bmaj=7.943 mas, bpa=-3.642 degrees
! Estimated noise=1.42143 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.432 x 7.943 at -3.642 degrees (North through East)
! Clean map  min=-0.0045159  max=1.0124 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078042Jy  sigma=1.019191
! Fit after  self-cal, rms=0.052799Jy  sigma=0.621473
! Inverting map and beam 
! Estimated beam: bmin=3.435 mas, bmaj=7.932 mas, bpa=-3.68 degrees
! Estimated noise=1.42148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138064 Jy
! Component: 100  -  total flux cleaned = 0.00151974 Jy
! Component: 150  -  total flux cleaned = 0.00151961 Jy
! Component: 200  -  total flux cleaned = 0.00155465 Jy
! Total flux subtracted in 200 components = 0.00155465 Jy
! Clean residual min=-0.004649 max=0.004187 Jy/beam
! Clean residual mean=-0.000006 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 1.0514 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 53 components and 1.0514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052692Jy  sigma=0.620665
! Fit after  self-cal, rms=0.052697Jy  sigma=0.620644
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.1728e-05 Jy
! Component: 100  -  total flux cleaned = -6.8849e-05 Jy
! Component: 150  -  total flux cleaned = -6.91155e-05 Jy
! Component: 200  -  total flux cleaned = -9.16662e-05 Jy
! Total flux subtracted in 200 components = -9.16662e-05 Jy
! Clean residual min=-0.004656 max=0.004096 Jy/beam
! Clean residual mean=-0.000007 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 1.05131 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 57 components and 1.05131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052662Jy  sigma=0.620435
! Fit after  self-cal, rms=0.052665Jy  sigma=0.620424
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052665Jy  sigma=0.620424
! Fit after  self-cal, rms=0.052599Jy  sigma=0.619950
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.567 mas, bmaj=6.543 mas, bpa=-6.427 degrees
! Estimated noise=2.05895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.777264 Jy
! Component: 100  -  total flux cleaned = 0.947286 Jy
! Component: 150  -  total flux cleaned = 1.00169 Jy
! Component: 200  -  total flux cleaned = 1.02703 Jy
! Total flux subtracted in 200 components = 1.02703 Jy
! Clean residual min=-0.008327 max=0.011668 Jy/beam
! Clean residual mean=-0.000016 rms=0.002244 Jy/beam
! Combined flux in latest and established models = 1.02703 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 1.02703 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=7.926 mas, bpa=-3.68 degrees
! Estimated noise=1.42117 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163862 Jy
! Component: 100  -  total flux cleaned = 0.0230399 Jy
! Component: 150  -  total flux cleaned = 0.0254981 Jy
! Component: 200  -  total flux cleaned = 0.025585 Jy
! Total flux subtracted in 200 components = 0.025585 Jy
! Clean residual min=-0.004563 max=0.004547 Jy/beam
! Clean residual mean=-0.000006 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 1.05262 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 23 components and 1.05262 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.477 mas, bmaj=12.94 mas, bpa=1.708 degrees
! Estimated noise=1.6726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126881 Jy
! Component: 100  -  total flux cleaned = 0.00120901 Jy
! Component: 150  -  total flux cleaned = 0.00123385 Jy
! Component: 200  -  total flux cleaned = 0.00125411 Jy
! Total flux subtracted in 200 components = 0.00125411 Jy
! Clean residual min=-0.004480 max=0.003883 Jy/beam
! Clean residual mean=0.000002 rms=0.001317 Jy/beam
! Combined flux in latest and established models = 1.05387 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.87389e-05 Jy
! Component: 100  -  total flux cleaned = 1.76464e-05 Jy
! Component: 150  -  total flux cleaned = 3.33269e-05 Jy
! Component: 200  -  total flux cleaned = 3.4085e-05 Jy
! Total flux subtracted in 200 components = 3.4085e-05 Jy
! Clean residual min=-0.004496 max=0.003879 Jy/beam
! Clean residual mean=0.000002 rms=0.001315 Jy/beam
! Combined flux in latest and established models = 1.05391 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 1.05391 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=7.926 mas, bpa=-3.68 degrees
! Estimated noise=1.42117 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000535205 Jy
! Component: 100  -  total flux cleaned = -0.000646123 Jy
! Component: 150  -  total flux cleaned = -0.000679342 Jy
! Component: 200  -  total flux cleaned = -0.000710538 Jy
! Total flux subtracted in 200 components = -0.000710538 Jy
! Clean residual min=-0.004700 max=0.004377 Jy/beam
! Clean residual mean=-0.000003 rms=0.001077 Jy/beam
! Combined flux in latest and established models = 1.0532 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 38 components and 1.0532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052592Jy  sigma=0.620601
! Fit after  self-cal, rms=0.052603Jy  sigma=0.620520
wmodel /J2031+1219_S_map.mod
! wmodel: Unable to open new model file: /J2031+1219_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J2031+1219_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.433 x 7.926 at -3.68 degrees (North through East)
! Clean map  min=-0.0045478  max=1.0111 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J2031+1219_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.01106 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00107555 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.319135 0.319135 0.63827 1.27654 2.55308 5.10616 10.2123 20.4246 40.8493 81.6986
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0032 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.011 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  940.041 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J2031+1219_S_dfm.log closed on Fri May 20 00:19:45 2016