! Started logfile: /scr/pima/bg219a_uvs/J1935+8130_X_dfm.log on Fri May 20 00:19:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1935+8130_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1935+8130_X_uva.fits
! AN table 1: 39 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.818071 visibilities/baseline/integration-bin.
! Found source: J1935+8130
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 8040 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1935+8130_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023561Jy  sigma=26.702432
! Fit after  self-cal, rms=0.842448Jy  sigma=21.550004
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5723 mas, bmaj=2.55 mas, bpa=-83.27 degrees
! Estimated noise=0.653988 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110518 Jy
! Component: 100  -  total flux cleaned = 0.152497 Jy
! Total flux subtracted in 100 components = 0.152497 Jy
! Clean residual min=-0.015844 max=0.025233 Jy/beam
! Clean residual mean=0.000021 rms=0.004512 Jy/beam
! Combined flux in latest and established models = 0.152497 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.152497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093685Jy  sigma=2.469044
! Fit after  self-cal, rms=0.093575Jy  sigma=2.462054
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7441 mas, bmaj=3.016 mas, bpa=-83.96 degrees
! Estimated noise=0.325376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0399417 Jy
! Component: 100  -  total flux cleaned = 0.0608805 Jy
! Component: 150  -  total flux cleaned = 0.0740453 Jy
! Component: 200  -  total flux cleaned = 0.0826122 Jy
! Total flux subtracted in 200 components = 0.0826122 Jy
! Clean residual min=-0.016008 max=0.028765 Jy/beam
! Clean residual mean=0.000019 rms=0.005054 Jy/beam
! Combined flux in latest and established models = 0.235109 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 31 components and 0.235109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076183Jy  sigma=1.973712
! Fit after  self-cal, rms=0.076187Jy  sigma=1.969665
! Inverting map 
! Added new window around map position (-2.8, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0253108 Jy
! Component: 100  -  total flux cleaned = 0.0371386 Jy
! Component: 150  -  total flux cleaned = 0.0430295 Jy
! Component: 200  -  total flux cleaned = 0.0436209 Jy
! Total flux subtracted in 200 components = 0.0436209 Jy
! Clean residual min=-0.012630 max=0.017046 Jy/beam
! Clean residual mean=0.000003 rms=0.003383 Jy/beam
! Combined flux in latest and established models = 0.27873 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 61 components and 0.27873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068274Jy  sigma=1.747543
! Fit after  self-cal, rms=0.067834Jy  sigma=1.727264
! Inverting map 
! Added new window around map position (-9.6, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174525 Jy
! Component: 100  -  total flux cleaned = 0.0232505 Jy
! Component: 150  -  total flux cleaned = 0.0241085 Jy
! Component: 200  -  total flux cleaned = 0.0244783 Jy
! Total flux subtracted in 200 components = 0.0244783 Jy
! Clean residual min=-0.008853 max=0.009714 Jy/beam
! Clean residual mean=0.000001 rms=0.002227 Jy/beam
! Combined flux in latest and established models = 0.303208 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 90 components and 0.303208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063726Jy  sigma=1.597723
! Fit after  self-cal, rms=0.062953Jy  sigma=1.572602
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7441 x 3.016 at -83.96 degrees (North through East)
! Clean map  min=-0.0078361  max=0.15599 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.96     MK        0.97     NL        0.99     
!   OV        0.99     PT        1.00     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.00     MK        0.95     NL        0.97     
!   OV        1.00     PT        0.96     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        1.00     MK        0.92     NL        0.99     
!   OV        1.01     PT        0.97     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        1.00     MK        0.91     NL        1.00     
!   OV        1.02     PT        0.96     SC        1.09     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.00     MK        1.02     NL        0.98     
!   OV        0.99     PT        0.99     SC        1.09     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        1.01     MK        0.98     NL        1.00     
!   OV        0.97     PT        0.99     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        1.01     MK        0.91     NL        1.02     
!   OV        1.00     PT        0.98     SC        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        1.01     MK        0.98     NL        1.02     
!   OV        1.00     PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.99     MK        0.99     NL        1.03     
!   OV        1.00     PT        1.01     SC        1.12     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        1.02     MK        0.91     NL        1.01     
!   OV        0.99     PT        1.01     SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        1.00     NL        0.98     
!   OV        1.04     PT        0.99     SC        1.09     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.99     MK        1.04     NL        0.97     
!   OV        1.05     PT        1.00     SC        1.17     
! 
! 
! Fit before self-cal, rms=0.062953Jy  sigma=1.572602
! Fit after  self-cal, rms=0.063333Jy  sigma=1.559962
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.747 mas, bmaj=3.028 mas, bpa=-83.55 degrees
! Estimated noise=0.327358 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00657145 Jy
! Component: 100  -  total flux cleaned = 0.00744172 Jy
! Component: 150  -  total flux cleaned = 0.00718689 Jy
! Component: 200  -  total flux cleaned = 0.00674616 Jy
! Total flux subtracted in 200 components = 0.00674616 Jy
! Clean residual min=-0.006813 max=0.006240 Jy/beam
! Clean residual mean=-0.000001 rms=0.001507 Jy/beam
! Combined flux in latest and established models = 0.309954 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 115 components and 0.309954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062368Jy  sigma=1.527118
! Fit after  self-cal, rms=0.062167Jy  sigma=1.519330
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062167Jy  sigma=1.519330
! Fit after  self-cal, rms=0.061466Jy  sigma=1.497483
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7442 mas, bmaj=3.002 mas, bpa=-83.19 degrees
! Estimated noise=0.328039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106759 Jy
! Component: 100  -  total flux cleaned = 0.000682165 Jy
! Component: 150  -  total flux cleaned = 0.000554557 Jy
! Component: 200  -  total flux cleaned = 0.000500308 Jy
! Total flux subtracted in 200 components = 0.000500308 Jy
! Clean residual min=-0.004687 max=0.003484 Jy/beam
! Clean residual mean=-0.000002 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.310455 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 127 components and 0.310455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061288Jy  sigma=1.492368
! Fit after  self-cal, rms=0.061275Jy  sigma=1.491547
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000630585 Jy
! Component: 100  -  total flux cleaned = 0.000570373 Jy
! Component: 150  -  total flux cleaned = 0.000411817 Jy
! Component: 200  -  total flux cleaned = 0.000263547 Jy
! Total flux subtracted in 200 components = 0.000263547 Jy
! Clean residual min=-0.004427 max=0.003269 Jy/beam
! Clean residual mean=-0.000002 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.310718 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 134 components and 0.310718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061180Jy  sigma=1.488895
! Fit after  self-cal, rms=0.061170Jy  sigma=1.488553
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061170Jy  sigma=1.488553
! Fit after  self-cal, rms=0.060846Jy  sigma=1.488012
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7426 mas, bmaj=2.997 mas, bpa=-83.1 degrees
! Estimated noise=0.327118 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00084999 Jy
! Component: 100  -  total flux cleaned = 0.00090469 Jy
! Component: 150  -  total flux cleaned = 0.000715961 Jy
! Component: 200  -  total flux cleaned = 0.000589244 Jy
! Total flux subtracted in 200 components = 0.000589244 Jy
! Clean residual min=-0.003955 max=0.002930 Jy/beam
! Clean residual mean=-0.000002 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.311307 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 140 components and 0.311307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060764Jy  sigma=1.485682
! Fit after  self-cal, rms=0.060751Jy  sigma=1.485339
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000440625 Jy
! Component: 100  -  total flux cleaned = 0.000569956 Jy
! Component: 150  -  total flux cleaned = 0.000452562 Jy
! Component: 200  -  total flux cleaned = 0.000380073 Jy
! Total flux subtracted in 200 components = 0.000380073 Jy
! Clean residual min=-0.003794 max=0.002759 Jy/beam
! Clean residual mean=-0.000002 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.311687 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 144 components and 0.311687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060698Jy  sigma=1.483865
! Fit after  self-cal, rms=0.060694Jy  sigma=1.483673
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060694Jy  sigma=1.483673
! Fit after  self-cal, rms=0.060473Jy  sigma=1.483391
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.915 mas, bmaj=5.517 mas, bpa=88.47 degrees
! Estimated noise=0.424744 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000501635 Jy
! Component: 100  -  total flux cleaned = 0.000152127 Jy
! Component: 150  -  total flux cleaned = -5.30543e-05 Jy
! Component: 200  -  total flux cleaned = -0.000121581 Jy
! Total flux subtracted in 200 components = -0.000121581 Jy
! Clean residual min=-0.004641 max=0.003435 Jy/beam
! Clean residual mean=-0.000004 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.311566 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 151 components and 0.311566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060450Jy  sigma=1.482436
! Fit after  self-cal, rms=0.060440Jy  sigma=1.482242
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328934 Jy
! Component: 100  -  total flux cleaned = 0.000260235 Jy
! Component: 150  -  total flux cleaned = 0.000140261 Jy
! Component: 200  -  total flux cleaned = -1.25517e-06 Jy
! Total flux subtracted in 200 components = -1.25517e-06 Jy
! Clean residual min=-0.004580 max=0.003346 Jy/beam
! Clean residual mean=-0.000004 rms=0.001087 Jy/beam
! Combined flux in latest and established models = 0.311565 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 157 components and 0.311565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060429Jy  sigma=1.481807
! Fit after  self-cal, rms=0.060426Jy  sigma=1.481733
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7415 mas, bmaj=2.995 mas, bpa=-83.04 degrees
! Estimated noise=0.326483 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7415 x 2.995 at -83.04 degrees (North through East)
! Clean map  min=-0.0041011  max=0.15416 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5715 mas, bmaj=2.548 mas, bpa=-82.45 degrees
! Estimated noise=0.656312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110381 Jy
! Component: 100  -  total flux cleaned = 0.156861 Jy
! Component: 150  -  total flux cleaned = 0.187685 Jy
! Component: 200  -  total flux cleaned = 0.21003 Jy
! Total flux subtracted in 200 components = 0.21003 Jy
! Clean residual min=-0.009364 max=0.012729 Jy/beam
! Clean residual mean=0.000013 rms=0.002827 Jy/beam
! Combined flux in latest and established models = 0.210031 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.210031 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7415 mas, bmaj=2.995 mas, bpa=-83.04 degrees
! Estimated noise=0.326483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0294541 Jy
! Component: 100  -  total flux cleaned = 0.0486739 Jy
! Component: 150  -  total flux cleaned = 0.0619764 Jy
! Component: 200  -  total flux cleaned = 0.0714181 Jy
! Total flux subtracted in 200 components = 0.0714181 Jy
! Clean residual min=-0.005143 max=0.005898 Jy/beam
! Clean residual mean=0.000007 rms=0.001650 Jy/beam
! Combined flux in latest and established models = 0.281449 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 89 components and 0.281449 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.915 mas, bmaj=5.517 mas, bpa=88.47 degrees
! Estimated noise=0.424744 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129088 Jy
! Component: 100  -  total flux cleaned = 0.0197609 Jy
! Component: 150  -  total flux cleaned = 0.0226903 Jy
! Component: 200  -  total flux cleaned = 0.0240481 Jy
! Total flux subtracted in 200 components = 0.0240481 Jy
! Clean residual min=-0.005542 max=0.004350 Jy/beam
! Clean residual mean=0.000000 rms=0.001368 Jy/beam
! Combined flux in latest and established models = 0.305497 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000981222 Jy
! Component: 100  -  total flux cleaned = 0.00161754 Jy
! Component: 150  -  total flux cleaned = 0.00192891 Jy
! Component: 200  -  total flux cleaned = 0.00219342 Jy
! Total flux subtracted in 200 components = 0.00219342 Jy
! Clean residual min=-0.004894 max=0.004283 Jy/beam
! Clean residual mean=-0.000001 rms=0.001220 Jy/beam
! Combined flux in latest and established models = 0.30769 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 160 components and 0.30769 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7415 mas, bmaj=2.995 mas, bpa=-83.04 degrees
! Estimated noise=0.326483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.35953e-05 Jy
! Component: 100  -  total flux cleaned = 3.86269e-05 Jy
! Component: 150  -  total flux cleaned = 0.000151478 Jy
! Component: 200  -  total flux cleaned = 0.000201612 Jy
! Total flux subtracted in 200 components = 0.000201612 Jy
! Clean residual min=-0.003623 max=0.003340 Jy/beam
! Clean residual mean=-0.000001 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.307892 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 182 components and 0.307892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060466Jy  sigma=1.483130
! Fit after  self-cal, rms=0.060417Jy  sigma=1.481451
wmodel /J1935+8130_X_map.mod
! wmodel: Unable to open new model file: /J1935+8130_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1935+8130_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7415 x 2.995 at -83.04 degrees (North through East)
! Clean map  min=-0.003145  max=0.15572 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1935+8130_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.155716 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000690357 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.33003 1.33003 2.66007 5.32014 10.6403 21.2806 42.5611 85.1222
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.155 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  225.558 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1935+8130_X_dfm.log closed on Fri May 20 00:19:41 2016