! Started logfile: /scr/pima/bg219a_uvs/J1924-2914_X_dfm.log on Fri May 20 00:19:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1924-2914_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1924-2914_X_uva.fits
! AN table 1: 68 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.67549 visibilities/baseline/integration-bin.
! Found source: J1924-2914
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 8268 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1924-2914_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=6.009951Jy  sigma=42.027991
! Fit after  self-cal, rms=5.002282Jy  sigma=34.378198
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.466 mas, bmaj=1.621 mas, bpa=-1.079 degrees
! Estimated noise=2.38856 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.66262 Jy
! Component: 100  -  total flux cleaned = 4.86478 Jy
! Total flux subtracted in 100 components = 4.86478 Jy
! Clean residual min=-0.391707 max=0.576998 Jy/beam
! Clean residual mean=0.004364 rms=0.083315 Jy/beam
! Combined flux in latest and established models = 4.86478 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 4.86478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.908355Jy  sigma=12.745872
! Fit after  self-cal, rms=1.905389Jy  sigma=12.729431
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.674625 Jy
! Component: 100  -  total flux cleaned = 1.07756 Jy
! Total flux subtracted in 100 components = 1.07756 Jy
! Clean residual min=-0.204182 max=0.213991 Jy/beam
! Clean residual mean=0.002792 rms=0.041850 Jy/beam
! Combined flux in latest and established models = 5.94234 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 13 components and 5.94234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.359816Jy  sigma=9.099272
! Fit after  self-cal, rms=1.357502Jy  sigma=9.089662
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5767 mas, bmaj=1.771 mas, bpa=1.641 degrees
! Estimated noise=1.35289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.530431 Jy
! Component: 100  -  total flux cleaned = 0.826797 Jy
! Component: 150  -  total flux cleaned = 1.00831 Jy
! Component: 200  -  total flux cleaned = 1.12147 Jy
! Total flux subtracted in 200 components = 1.12147 Jy
! Clean residual min=-0.172536 max=0.195727 Jy/beam
! Clean residual mean=0.004342 rms=0.049354 Jy/beam
! Combined flux in latest and established models = 7.06381 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 39 components and 7.06381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.071764Jy  sigma=7.367549
! Fit after  self-cal, rms=1.069559Jy  sigma=7.355850
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5767 x 1.771 at 1.641 degrees (North through East)
! Clean map  min=-0.15839  max=5.3529 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.91     MK        1.03     NL        1.06     OV        0.98     
!   PT        0.95     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.00     NL        1.04     OV        1.03     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.99     NL        1.03     OV        1.01     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.02     NL        1.07     OV        0.99     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.91     MK        1.04     NL        1.07     OV        1.05     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.00     NL        1.05     OV        0.99     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.97     NL        1.08     OV        1.05     
!   PT        0.91     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.00     NL        1.05     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.00     NL        1.03     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.02     NL        1.03     OV        1.11     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        0.98     NL        1.05     OV        1.02     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.04     NL        1.04     OV        1.05     
!   PT        0.94     SC        0.98     
! 
! 
! Fit before self-cal, rms=1.069559Jy  sigma=7.355850
! Fit after  self-cal, rms=1.018545Jy  sigma=6.906705
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5806 mas, bmaj=1.78 mas, bpa=1.719 degrees
! Estimated noise=1.3473 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.011504 Jy
! Component: 100  -  total flux cleaned = -0.00939564 Jy
! Component: 150  -  total flux cleaned = -0.00941627 Jy
! Component: 200  -  total flux cleaned = -0.00868333 Jy
! Total flux subtracted in 200 components = -0.00868333 Jy
! Clean residual min=-0.115819 max=0.128577 Jy/beam
! Clean residual mean=-0.000065 rms=0.032956 Jy/beam
! Combined flux in latest and established models = 7.05513 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 44 components and 7.05513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.015927Jy  sigma=6.894141
! Fit after  self-cal, rms=1.015339Jy  sigma=6.891207
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.015339Jy  sigma=6.891207
! Fit after  self-cal, rms=1.015257Jy  sigma=6.791006
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5799 mas, bmaj=1.777 mas, bpa=1.705 degrees
! Estimated noise=1.34874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.022335 Jy
! Component: 100  -  total flux cleaned = 0.0269755 Jy
! Component: 150  -  total flux cleaned = 0.0285019 Jy
! Component: 200  -  total flux cleaned = 0.030504 Jy
! Total flux subtracted in 200 components = 0.030504 Jy
! Clean residual min=-0.103664 max=0.119727 Jy/beam
! Clean residual mean=0.000003 rms=0.028412 Jy/beam
! Combined flux in latest and established models = 7.08563 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 46 components and 7.08563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.012833Jy  sigma=6.785211
! Fit after  self-cal, rms=1.012662Jy  sigma=6.783389
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113431 Jy
! Component: 100  -  total flux cleaned = -0.000417502 Jy
! Component: 150  -  total flux cleaned = 0.000766845 Jy
! Component: 200  -  total flux cleaned = 0.00179383 Jy
! Total flux subtracted in 200 components = 0.00179383 Jy
! Clean residual min=-0.101963 max=0.117348 Jy/beam
! Clean residual mean=-0.000007 rms=0.028171 Jy/beam
! Combined flux in latest and established models = 7.08742 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 46 components and 7.08742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.011381Jy  sigma=6.779346
! Fit after  self-cal, rms=1.011296Jy  sigma=6.777852
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.011296Jy  sigma=6.777852
! Fit after  self-cal, rms=1.034851Jy  sigma=6.509746
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5802 mas, bmaj=1.773 mas, bpa=1.743 degrees
! Estimated noise=1.3509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254511 Jy
! Component: 100  -  total flux cleaned = 0.0298091 Jy
! Component: 150  -  total flux cleaned = 0.0328062 Jy
! Component: 200  -  total flux cleaned = 0.0338212 Jy
! Total flux subtracted in 200 components = 0.0338212 Jy
! Clean residual min=-0.066509 max=0.122497 Jy/beam
! Clean residual mean=-0.000029 rms=0.018380 Jy/beam
! Combined flux in latest and established models = 7.12124 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 7.12124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.032972Jy  sigma=6.506116
! Fit after  self-cal, rms=1.032892Jy  sigma=6.505199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0985161 Jy
! Component: 100  -  total flux cleaned = 0.141611 Jy
! Component: 150  -  total flux cleaned = 0.169887 Jy
! Component: 200  -  total flux cleaned = 0.190554 Jy
! Total flux subtracted in 200 components = 0.190554 Jy
! Clean residual min=-0.048813 max=0.042101 Jy/beam
! Clean residual mean=-0.001188 rms=0.010942 Jy/beam
! Combined flux in latest and established models = 7.3118 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 65 components and 7.3118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.015971Jy  sigma=6.473917
! Fit after  self-cal, rms=1.012290Jy  sigma=6.455811
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.012290Jy  sigma=6.455811
! Fit after  self-cal, rms=1.014110Jy  sigma=6.438794
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.722 mas, bmaj=5.179 mas, bpa=0.5375 degrees
! Estimated noise=2.48303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0856768 Jy
! Component: 100  -  total flux cleaned = 0.122834 Jy
! Component: 150  -  total flux cleaned = 0.145306 Jy
! Component: 200  -  total flux cleaned = 0.15935 Jy
! Total flux subtracted in 200 components = 0.15935 Jy
! Clean residual min=-0.070728 max=0.050086 Jy/beam
! Clean residual mean=-0.002991 rms=0.021581 Jy/beam
! Combined flux in latest and established models = 7.47115 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 74 components and 7.47115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.010237Jy  sigma=6.445512
! Fit after  self-cal, rms=1.009272Jy  sigma=6.437371
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224792 Jy
! Component: 100  -  total flux cleaned = 0.0248877 Jy
! Component: 150  -  total flux cleaned = 0.0269212 Jy
! Component: 200  -  total flux cleaned = 0.028671 Jy
! Total flux subtracted in 200 components = 0.028671 Jy
! Clean residual min=-0.073988 max=0.052994 Jy/beam
! Clean residual mean=-0.003670 rms=0.022621 Jy/beam
! Combined flux in latest and established models = 7.49982 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 76 components and 7.49982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.009544Jy  sigma=6.443287
! Fit after  self-cal, rms=1.009404Jy  sigma=6.442567
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.5803 mas, bmaj=1.772 mas, bpa=1.736 degrees
! Estimated noise=1.35095 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5803 x 1.772 at 1.736 degrees (North through East)
! Clean map  min=-0.043355  max=5.3786 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.009404Jy  sigma=6.442567
! Fit after  self-cal, rms=0.910406Jy  sigma=5.883137
! Inverting map and beam 
! Estimated beam: bmin=0.5817 mas, bmaj=1.779 mas, bpa=1.933 degrees
! Estimated noise=1.30569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.131222 Jy
! Component: 100  -  total flux cleaned = -0.194016 Jy
! Component: 150  -  total flux cleaned = -0.235338 Jy
! Component: 200  -  total flux cleaned = -0.252663 Jy
! Total flux subtracted in 200 components = -0.252663 Jy
! Clean residual min=-0.061547 max=0.058902 Jy/beam
! Clean residual mean=0.000633 rms=0.014542 Jy/beam
! Combined flux in latest and established models = 7.24716 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 86 components and 7.24716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.886547Jy  sigma=5.737878
! Fit after  self-cal, rms=0.886320Jy  sigma=5.736460
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0115763 Jy
! Component: 100  -  total flux cleaned = -0.0199051 Jy
! Component: 150  -  total flux cleaned = -0.0241395 Jy
! Component: 200  -  total flux cleaned = -0.027265 Jy
! Total flux subtracted in 200 components = -0.027265 Jy
! Clean residual min=-0.054344 max=0.060397 Jy/beam
! Clean residual mean=0.000783 rms=0.014416 Jy/beam
! Combined flux in latest and established models = 7.21989 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 89 components and 7.21989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.884736Jy  sigma=5.731249
! Fit after  self-cal, rms=0.884637Jy  sigma=5.730433
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.884637Jy  sigma=5.730433
! Fit after  self-cal, rms=0.866719Jy  sigma=5.589096
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.4713 mas, bmaj=1.618 mas, bpa=-0.8969 degrees
! Estimated noise=2.29411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51608 Jy
! Component: 100  -  total flux cleaned = 4.66266 Jy
! Component: 150  -  total flux cleaned = 5.28671 Jy
! Component: 200  -  total flux cleaned = 5.65268 Jy
! Total flux subtracted in 200 components = 5.65268 Jy
! Clean residual min=-0.169054 max=0.189712 Jy/beam
! Clean residual mean=0.002246 rms=0.036172 Jy/beam
! Combined flux in latest and established models = 5.65268 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 5.65268 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.5836 mas, bmaj=1.784 mas, bpa=1.999 degrees
! Estimated noise=1.27252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.431034 Jy
! Component: 100  -  total flux cleaned = 0.674075 Jy
! Component: 150  -  total flux cleaned = 0.834832 Jy
! Component: 200  -  total flux cleaned = 0.946594 Jy
! Total flux subtracted in 200 components = 0.946594 Jy
! Clean residual min=-0.092123 max=0.101832 Jy/beam
! Clean residual mean=0.002932 rms=0.024443 Jy/beam
! Combined flux in latest and established models = 6.59927 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 34 components and 6.59927 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.723 mas, bmaj=5.211 mas, bpa=0.4348 degrees
! Estimated noise=2.3136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180607 Jy
! Component: 100  -  total flux cleaned = 0.270563 Jy
! Component: 150  -  total flux cleaned = 0.324389 Jy
! Component: 200  -  total flux cleaned = 0.358071 Jy
! Total flux subtracted in 200 components = 0.358071 Jy
! Clean residual min=-0.120001 max=0.139454 Jy/beam
! Clean residual mean=0.003660 rms=0.041071 Jy/beam
! Combined flux in latest and established models = 6.95734 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211456 Jy
! Component: 100  -  total flux cleaned = 0.029353 Jy
! Component: 150  -  total flux cleaned = 0.0314123 Jy
! Component: 200  -  total flux cleaned = 0.0338216 Jy
! Total flux subtracted in 200 components = 0.0338216 Jy
! Clean residual min=-0.117479 max=0.136347 Jy/beam
! Clean residual mean=0.002895 rms=0.040265 Jy/beam
! Combined flux in latest and established models = 6.99116 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 49 components and 6.99116 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.5836 mas, bmaj=1.784 mas, bpa=1.999 degrees
! Estimated noise=1.27252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0231702 Jy
! Component: 100  -  total flux cleaned = -0.0212533 Jy
! Component: 150  -  total flux cleaned = -0.0153294 Jy
! Component: 200  -  total flux cleaned = -0.0103903 Jy
! Total flux subtracted in 200 components = -0.0103903 Jy
! Clean residual min=-0.072015 max=0.065641 Jy/beam
! Clean residual mean=0.000786 rms=0.015629 Jy/beam
! Combined flux in latest and established models = 6.98077 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 61 components and 6.98077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.847026Jy  sigma=5.494718
! Fit after  self-cal, rms=0.846994Jy  sigma=5.485396
wmodel /J1924-2914_X_map.mod
! wmodel: Unable to open new model file: /J1924-2914_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1924-2914_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5836 x 1.784 at 1.999 degrees (North through East)
! Clean map  min=-0.059132  max=5.0467 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1924-2914_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 5.04666 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0154165 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.916437 0.916437 1.83287 3.66575 7.3315 14.663 29.326 58.652
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0462 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       5.046 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  327.354 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1924-2914_X_dfm.log closed on Fri May 20 00:19:34 2016