! Started logfile: /scr/pima/bg219a_uvs/J1911-2102_S_dfm.log on Fri May 20 00:19:01 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1911-2102_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1911-2102_S_uva.fits
! AN table 1: 41 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.772358 visibilities/baseline/integration-bin.
! Found source: J1911-2102
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1900 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1911-2102_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.046404Jy  sigma=12.708521
! Fit after  self-cal, rms=0.809080Jy  sigma=9.631851
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.23 mas, bmaj=6.024 mas, bpa=-6.956 degrees
! Estimated noise=1.80805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.144284 Jy
! Component: 100  -  total flux cleaned = 0.186697 Jy
! Total flux subtracted in 100 components = 0.186697 Jy
! Clean residual min=-0.019385 max=0.027389 Jy/beam
! Clean residual mean=-0.000163 rms=0.007036 Jy/beam
! Combined flux in latest and established models = 0.186697 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.186697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171171Jy  sigma=2.117152
! Fit after  self-cal, rms=0.171051Jy  sigma=2.115199
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.561 mas, bmaj=6.727 mas, bpa=-6.824 degrees
! Estimated noise=1.38188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0533628 Jy
! Component: 100  -  total flux cleaned = 0.0857126 Jy
! Component: 150  -  total flux cleaned = 0.106642 Jy
! Component: 200  -  total flux cleaned = 0.120341 Jy
! Total flux subtracted in 200 components = 0.120341 Jy
! Clean residual min=-0.022733 max=0.028721 Jy/beam
! Clean residual mean=-0.000067 rms=0.008025 Jy/beam
! Combined flux in latest and established models = 0.307038 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 45 components and 0.307038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154365Jy  sigma=1.865967
! Fit after  self-cal, rms=0.154009Jy  sigma=1.860265
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.561 x 6.727 at -6.824 degrees (North through East)
! Clean map  min=-0.021979  max=0.2002 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.154009Jy  sigma=1.860265
! Fit after  self-cal, rms=0.154009Jy  sigma=1.860265
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.561 mas, bmaj=6.727 mas, bpa=-6.824 degrees
! Estimated noise=1.38188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104877 Jy
! Component: 100  -  total flux cleaned = 0.0172457 Jy
! Component: 150  -  total flux cleaned = 0.0213763 Jy
! Component: 200  -  total flux cleaned = 0.0223667 Jy
! Total flux subtracted in 200 components = 0.0223667 Jy
! Clean residual min=-0.023111 max=0.028925 Jy/beam
! Clean residual mean=-0.000034 rms=0.007493 Jy/beam
! Combined flux in latest and established models = 0.329404 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.329404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153395Jy  sigma=1.847358
! Fit after  self-cal, rms=0.153384Jy  sigma=1.847131
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153384Jy  sigma=1.847131
! Fit after  self-cal, rms=0.150330Jy  sigma=1.838564
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.551 mas, bmaj=6.722 mas, bpa=-6.959 degrees
! Estimated noise=1.35066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00304583 Jy
! Component: 100  -  total flux cleaned = -0.00305497 Jy
! Component: 150  -  total flux cleaned = -0.00294272 Jy
! Component: 200  -  total flux cleaned = -0.00283035 Jy
! Total flux subtracted in 200 components = -0.00283035 Jy
! Clean residual min=-0.020290 max=0.026049 Jy/beam
! Clean residual mean=-0.000034 rms=0.006653 Jy/beam
! Combined flux in latest and established models = 0.326574 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.326574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150087Jy  sigma=1.836591
! Fit after  self-cal, rms=0.150161Jy  sigma=1.836137
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.55412e-05 Jy
! Component: 100  -  total flux cleaned = 7.38702e-05 Jy
! Component: 150  -  total flux cleaned = 0.000287593 Jy
! Component: 200  -  total flux cleaned = 0.000489802 Jy
! Total flux subtracted in 200 components = 0.000489802 Jy
! Clean residual min=-0.020307 max=0.025554 Jy/beam
! Clean residual mean=-0.000034 rms=0.006623 Jy/beam
! Combined flux in latest and established models = 0.327064 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 63 components and 0.327064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150026Jy  sigma=1.834671
! Fit after  self-cal, rms=0.150021Jy  sigma=1.834612
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150021Jy  sigma=1.834612
! Fit after  self-cal, rms=0.149577Jy  sigma=1.834461
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.548 mas, bmaj=6.718 mas, bpa=-6.939 degrees
! Estimated noise=1.34518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000301248 Jy
! Component: 100  -  total flux cleaned = -0.00010245 Jy
! Component: 150  -  total flux cleaned = -2.30654e-06 Jy
! Component: 200  -  total flux cleaned = 0.000279142 Jy
! Total flux subtracted in 200 components = 0.000279142 Jy
! Clean residual min=-0.020057 max=0.024925 Jy/beam
! Clean residual mean=-0.000033 rms=0.006526 Jy/beam
! Combined flux in latest and established models = 0.327343 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 63 components and 0.327343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149459Jy  sigma=1.833200
! Fit after  self-cal, rms=0.149456Jy  sigma=1.833147
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.30531e-06 Jy
! Component: 100  -  total flux cleaned = 0.000189019 Jy
! Component: 150  -  total flux cleaned = 0.000456617 Jy
! Component: 200  -  total flux cleaned = 0.000624483 Jy
! Total flux subtracted in 200 components = 0.000624483 Jy
! Clean residual min=-0.019999 max=0.024466 Jy/beam
! Clean residual mean=-0.000033 rms=0.006496 Jy/beam
! Combined flux in latest and established models = 0.327967 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 64 components and 0.327967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149359Jy  sigma=1.832051
! Fit after  self-cal, rms=0.149359Jy  sigma=1.832005
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149359Jy  sigma=1.832005
! Fit after  self-cal, rms=0.149216Jy  sigma=1.831990
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.461 mas, bmaj=17.19 mas, bpa=-3.453 degrees
! Estimated noise=1.96264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123605 Jy
! Component: 100  -  total flux cleaned = 0.0146619 Jy
! Component: 150  -  total flux cleaned = 0.0150071 Jy
! Component: 200  -  total flux cleaned = 0.0153402 Jy
! Total flux subtracted in 200 components = 0.0153402 Jy
! Clean residual min=-0.039628 max=0.043480 Jy/beam
! Clean residual mean=-0.000034 rms=0.015313 Jy/beam
! Combined flux in latest and established models = 0.343308 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 68 components and 0.343308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149609Jy  sigma=1.833529
! Fit after  self-cal, rms=0.149494Jy  sigma=1.832128
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000963375 Jy
! Component: 100  -  total flux cleaned = 0.000949027 Jy
! Component: 150  -  total flux cleaned = 0.000924403 Jy
! Component: 200  -  total flux cleaned = 0.00125032 Jy
! Total flux subtracted in 200 components = 0.00125032 Jy
! Clean residual min=-0.039367 max=0.043383 Jy/beam
! Clean residual mean=-0.000032 rms=0.015208 Jy/beam
! Combined flux in latest and established models = 0.344558 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.344558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149747Jy  sigma=1.835148
! Fit after  self-cal, rms=0.149690Jy  sigma=1.834465
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.547 mas, bmaj=6.715 mas, bpa=-6.906 degrees
! Estimated noise=1.34357 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.547 x 6.715 at -6.906 degrees (North through East)
! Clean map  min=-0.019842  max=0.18393 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.217 mas, bmaj=6.011 mas, bpa=-7.113 degrees
! Estimated noise=1.74294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136984 Jy
! Component: 100  -  total flux cleaned = 0.181837 Jy
! Component: 150  -  total flux cleaned = 0.211902 Jy
! Component: 200  -  total flux cleaned = 0.234143 Jy
! Total flux subtracted in 200 components = 0.234143 Jy
! Clean residual min=-0.016692 max=0.020118 Jy/beam
! Clean residual mean=-0.000107 rms=0.005364 Jy/beam
! Combined flux in latest and established models = 0.234143 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.234143 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.547 mas, bmaj=6.715 mas, bpa=-6.906 degrees
! Estimated noise=1.34357 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344908 Jy
! Component: 100  -  total flux cleaned = 0.0553733 Jy
! Component: 150  -  total flux cleaned = 0.0689162 Jy
! Component: 200  -  total flux cleaned = 0.0777739 Jy
! Total flux subtracted in 200 components = 0.0777739 Jy
! Clean residual min=-0.020127 max=0.026998 Jy/beam
! Clean residual mean=-0.000056 rms=0.006947 Jy/beam
! Combined flux in latest and established models = 0.311917 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 52 components and 0.311917 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.461 mas, bmaj=17.19 mas, bpa=-3.453 degrees
! Estimated noise=1.96264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210125 Jy
! Component: 100  -  total flux cleaned = 0.0279619 Jy
! Component: 150  -  total flux cleaned = 0.028525 Jy
! Component: 200  -  total flux cleaned = 0.0288882 Jy
! Total flux subtracted in 200 components = 0.0288882 Jy
! Clean residual min=-0.040845 max=0.044544 Jy/beam
! Clean residual mean=-0.000038 rms=0.015636 Jy/beam
! Combined flux in latest and established models = 0.340806 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358305 Jy
! Component: 100  -  total flux cleaned = 0.000706295 Jy
! Component: 150  -  total flux cleaned = 0.0010473 Jy
! Component: 200  -  total flux cleaned = 0.00138457 Jy
! Total flux subtracted in 200 components = 0.00138457 Jy
! Clean residual min=-0.040329 max=0.044360 Jy/beam
! Clean residual mean=-0.000035 rms=0.015497 Jy/beam
! Combined flux in latest and established models = 0.34219 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 66 components and 0.34219 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.547 mas, bmaj=6.715 mas, bpa=-6.906 degrees
! Estimated noise=1.34357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0116636 Jy
! Component: 100  -  total flux cleaned = -0.0139233 Jy
! Component: 150  -  total flux cleaned = -0.0140568 Jy
! Component: 200  -  total flux cleaned = -0.0139366 Jy
! Total flux subtracted in 200 components = -0.0139366 Jy
! Clean residual min=-0.019699 max=0.024659 Jy/beam
! Clean residual mean=-0.000033 rms=0.006517 Jy/beam
! Combined flux in latest and established models = 0.328254 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 82 components and 0.328253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149665Jy  sigma=1.836858
! Fit after  self-cal, rms=0.149635Jy  sigma=1.836382
wmodel /J1911-2102_S_map.mod
! wmodel: Unable to open new model file: /J1911-2102_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1911-2102_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.547 x 6.715 at -6.906 degrees (North through East)
! Clean map  min=-0.019046  max=0.18389 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1911-2102_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.183893 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00651431 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -10.6274 10.6274 21.2547 42.5095 85.019
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0195 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.183 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  28.229 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1911-2102_S_dfm.log closed on Fri May 20 00:19:03 2016