! Started logfile: /scr/pima/bg219a_uvs/J1908-2942_S_dfm.log on Fri May 20 00:18:52 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1908-2942_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1908-2942_S_uva.fits
! AN table 1: 21 integrations on 6 of 6 possible baselines.
! AN table 2: 21 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1908-2942
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 840 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1908-2942_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000872Jy  sigma=19.749303
! Fit after  self-cal, rms=0.901455Jy  sigma=17.631319
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.324 mas, bmaj=57.36 mas, bpa=-5.124 degrees
! Estimated noise=1.54823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.076208 Jy
! Component: 100  -  total flux cleaned = 0.0879753 Jy
! Total flux subtracted in 100 components = 0.0879753 Jy
! Clean residual min=-0.006918 max=0.006972 Jy/beam
! Clean residual mean=-0.000117 rms=0.002684 Jy/beam
! Combined flux in latest and established models = 0.0879753 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0879753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061164Jy  sigma=1.157940
! Fit after  self-cal, rms=0.060906Jy  sigma=1.152904
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.801 mas, bmaj=62.03 mas, bpa=-5.029 degrees
! Estimated noise=1.36108 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00338185 Jy
! Component: 100  -  total flux cleaned = 0.00358637 Jy
! Component: 150  -  total flux cleaned = 0.0048056 Jy
! Component: 200  -  total flux cleaned = 0.00549531 Jy
! Total flux subtracted in 200 components = 0.00549531 Jy
! Clean residual min=-0.002696 max=0.002685 Jy/beam
! Clean residual mean=-0.000056 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 0.0934706 Jy
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 111 components and 0.0934706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058961Jy  sigma=1.112441
! Fit after  self-cal, rms=0.058880Jy  sigma=1.111039
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.801 x 62.03 at -5.029 degrees (North through East)
! Clean map  min=-0.0049261  max=0.096465 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     NL        0.98     OV        1.04     PT        0.97     
! 
!  A total of 60 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     NL        1.03     OV        1.00     PT        0.89     
! 
!  A total of 60 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     NL        1.01     OV        0.98     PT        0.97     
! 
!  A total of 60 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     NL        1.04     OV        1.10     PT        0.96     
! 
!  A total of 60 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
! 
! 
! Fit before self-cal, rms=0.058880Jy  sigma=1.111039
! Fit after  self-cal, rms=0.057015Jy  sigma=1.138451
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.168 mas, bmaj=102.4 mas, bpa=-8.982 degrees
! Estimated noise=1.57419 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000906123 Jy
! Component: 100  -  total flux cleaned = 0.000865559 Jy
! Component: 150  -  total flux cleaned = -8.44449e-07 Jy
! Component: 200  -  total flux cleaned = -0.000749632 Jy
! Total flux subtracted in 200 components = -0.000749632 Jy
! Clean residual min=-0.000807 max=0.000805 Jy/beam
! Clean residual mean=-0.000006 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.0927209 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 190 components and 0.0927209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056883Jy  sigma=1.136312
! Fit after  self-cal, rms=0.056989Jy  sigma=1.135664
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056989Jy  sigma=1.135664
! Fit after  self-cal, rms=0.056851Jy  sigma=1.135583
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.17 mas, bmaj=102.4 mas, bpa=-8.988 degrees
! Estimated noise=1.57068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00043401 Jy
! Component: 100  -  total flux cleaned = -0.000663339 Jy
! Component: 150  -  total flux cleaned = -0.00115079 Jy
! Component: 200  -  total flux cleaned = -0.00149159 Jy
! Total flux subtracted in 200 components = -0.00149159 Jy
! Clean residual min=-0.000520 max=0.000514 Jy/beam
! Clean residual mean=-0.000000 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0912293 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 241 components and 0.0912293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056800Jy  sigma=1.134858
! Fit after  self-cal, rms=0.056818Jy  sigma=1.134780
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000272854 Jy
! Component: 100  -  total flux cleaned = -4.72393e-05 Jy
! Component: 150  -  total flux cleaned = -4.60296e-05 Jy
! Component: 200  -  total flux cleaned = -0.000148013 Jy
! Total flux subtracted in 200 components = -0.000148013 Jy
! Clean residual min=-0.000433 max=0.000422 Jy/beam
! Clean residual mean=0.000002 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0910813 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 290 components and 0.0910813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056791Jy  sigma=1.134407
! Fit after  self-cal, rms=0.056796Jy  sigma=1.134370
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056796Jy  sigma=1.134370
! Fit after  self-cal, rms=0.056422Jy  sigma=1.135664
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.124 mas, bmaj=102.6 mas, bpa=-9.012 degrees
! Estimated noise=1.5679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139777 Jy
! Component: 100  -  total flux cleaned = 0.00163539 Jy
! Component: 150  -  total flux cleaned = 0.00178304 Jy
! Component: 200  -  total flux cleaned = 0.00164163 Jy
! Total flux subtracted in 200 components = 0.00164163 Jy
! Clean residual min=-0.000469 max=0.000472 Jy/beam
! Clean residual mean=-0.000005 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.092723 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 349 components and 0.0927229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056375Jy  sigma=1.134799
! Fit after  self-cal, rms=0.056369Jy  sigma=1.134736
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000298317 Jy
! Component: 100  -  total flux cleaned = -0.000167639 Jy
! Component: 150  -  total flux cleaned = -0.000246093 Jy
! Component: 200  -  total flux cleaned = -0.000302385 Jy
! Total flux subtracted in 200 components = -0.000302385 Jy
! Clean residual min=-0.000311 max=0.000310 Jy/beam
! Clean residual mean=0.000002 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.0924206 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 403 components and 0.0924206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056352Jy  sigma=1.134489
! Fit after  self-cal, rms=0.056354Jy  sigma=1.134475
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056354Jy  sigma=1.134475
! Fit after  self-cal, rms=0.056178Jy  sigma=1.135168
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.106 mas, bmaj=99.47 mas, bpa=-8.879 degrees
! Estimated noise=1.60346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144271 Jy
! Component: 100  -  total flux cleaned = 0.00200869 Jy
! Component: 150  -  total flux cleaned = 0.00224724 Jy
! Component: 200  -  total flux cleaned = 0.00248311 Jy
! Total flux subtracted in 200 components = 0.00248311 Jy
! Clean residual min=-0.000310 max=0.000309 Jy/beam
! Clean residual mean=-0.000001 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.0949037 Jy
selfcal
! Performing phase self-cal
! Adding 94 model components to the UV plane model.
! The established model now contains 482 components and 0.0949037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056138Jy  sigma=1.134435
! Fit after  self-cal, rms=0.056140Jy  sigma=1.134414
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000211703 Jy
! Component: 100  -  total flux cleaned = -0.000156927 Jy
! Component: 150  -  total flux cleaned = -0.000239143 Jy
! Component: 200  -  total flux cleaned = -0.000323507 Jy
! Total flux subtracted in 200 components = -0.000323507 Jy
! Clean residual min=-0.000286 max=0.000287 Jy/beam
! Clean residual mean=0.000002 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.0945802 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 518 components and 0.0945802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056127Jy  sigma=1.134239
! Fit after  self-cal, rms=0.056129Jy  sigma=1.134223
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.083 mas, bmaj=102.7 mas, bpa=-9.039 degrees
! Estimated noise=1.5655 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.083 x 102.7 at -9.039 degrees (North through East)
! Clean map  min=-0.0025331  max=0.094038 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.543 mas, bmaj=108.5 mas, bpa=-9.338 degrees
! Estimated noise=1.75633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0738255 Jy
! Component: 100  -  total flux cleaned = 0.088249 Jy
! Component: 150  -  total flux cleaned = 0.0891774 Jy
! Component: 200  -  total flux cleaned = 0.0888708 Jy
! Total flux subtracted in 200 components = 0.0888708 Jy
! Clean residual min=-0.004376 max=0.004368 Jy/beam
! Clean residual mean=-0.000071 rms=0.001930 Jy/beam
! Combined flux in latest and established models = 0.0888708 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 64 model components to the UV plane model.
! The established model now contains 64 components and 0.0888708 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.083 mas, bmaj=102.7 mas, bpa=-9.039 degrees
! Estimated noise=1.5655 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.002363 Jy
! Component: 100  -  total flux cleaned = -0.00299848 Jy
! Component: 150  -  total flux cleaned = -0.0036928 Jy
! Component: 200  -  total flux cleaned = -0.00394969 Jy
! Total flux subtracted in 200 components = -0.00394969 Jy
! Clean residual min=-0.002012 max=0.002010 Jy/beam
! Clean residual mean=-0.000020 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.0849211 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 124 components and 0.0849212 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.106 mas, bmaj=99.47 mas, bpa=-8.879 degrees
! Estimated noise=1.60346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00183685 Jy
! Component: 100  -  total flux cleaned = -0.00238347 Jy
! Component: 150  -  total flux cleaned = -0.00314312 Jy
! Component: 200  -  total flux cleaned = -0.00345144 Jy
! Total flux subtracted in 200 components = -0.00345144 Jy
! Clean residual min=-0.001044 max=0.001064 Jy/beam
! Clean residual mean=-0.000010 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0814697 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.07937e-05 Jy
! Component: 100  -  total flux cleaned = 0.000136368 Jy
! Component: 150  -  total flux cleaned = 0.000539164 Jy
! Component: 200  -  total flux cleaned = 0.00127864 Jy
! Total flux subtracted in 200 components = 0.00127864 Jy
! Clean residual min=-0.001606 max=0.001591 Jy/beam
! Clean residual mean=-0.000001 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0827484 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 177 components and 0.0827484 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.083 mas, bmaj=102.7 mas, bpa=-9.039 degrees
! Estimated noise=1.5655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000537241 Jy
! Component: 100  -  total flux cleaned = -0.000402977 Jy
! Component: 150  -  total flux cleaned = -0.000192027 Jy
! Component: 200  -  total flux cleaned = -9.25311e-05 Jy
! Total flux subtracted in 200 components = -9.25311e-05 Jy
! Clean residual min=-0.000356 max=0.000357 Jy/beam
! Clean residual mean=0.000005 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.0826558 Jy
selfcal
! Performing phase self-cal
! Adding 106 model components to the UV plane model.
! The established model now contains 282 components and 0.0826558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056147Jy  sigma=1.134413
! Fit after  self-cal, rms=0.056154Jy  sigma=1.134345
wmodel /J1908-2942_S_map.mod
! wmodel: Unable to open new model file: /J1908-2942_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1908-2942_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.083 x 102.7 at -9.039 degrees (North through East)
! Clean map  min=-0.0052912  max=0.088053 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1908-2942_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0880526 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000137964 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.470052 0.470052 0.940105 1.88021 3.76042 7.52084 15.0417 30.0833 60.1667
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  638.226 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1908-2942_S_dfm.log closed on Fri May 20 00:18:56 2016