! Started logfile: /scr/pima/bg219a_uvs/J1848+3219_X_dfm.log on Fri May 20 00:18:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1848+3219_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1848+3219_X_uva.fits
! AN table 1: 18 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1848+3219
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 2700 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1848+3219_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.573523Jy  sigma=27.528330
! Fit after  self-cal, rms=0.348281Jy  sigma=6.055685
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5959 mas, bmaj=2.466 mas, bpa=17.58 degrees
! Estimated noise=1.40475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.818722 Jy
! Component: 100  -  total flux cleaned = 1.06078 Jy
! Total flux subtracted in 100 components = 1.06078 Jy
! Clean residual min=-0.066663 max=0.105844 Jy/beam
! Clean residual mean=-0.000050 rms=0.015913 Jy/beam
! Combined flux in latest and established models = 1.06078 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.06078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.314085Jy  sigma=5.457230
! Fit after  self-cal, rms=0.313951Jy  sigma=5.455682
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112465 Jy
! Component: 100  -  total flux cleaned = 0.168547 Jy
! Total flux subtracted in 100 components = 0.168547 Jy
! Clean residual min=-0.032832 max=0.031627 Jy/beam
! Clean residual mean=-0.000029 rms=0.007377 Jy/beam
! Combined flux in latest and established models = 1.22933 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 1.22933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.257994Jy  sigma=4.535729
! Fit after  self-cal, rms=0.257973Jy  sigma=4.535412
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7908 mas, bmaj=2.585 mas, bpa=15.25 degrees
! Estimated noise=0.872049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0388357 Jy
! Component: 100  -  total flux cleaned = 0.0566039 Jy
! Component: 150  -  total flux cleaned = 0.0673744 Jy
! Component: 200  -  total flux cleaned = 0.0744181 Jy
! Total flux subtracted in 200 components = 0.0744181 Jy
! Clean residual min=-0.018289 max=0.021794 Jy/beam
! Clean residual mean=-0.000039 rms=0.004788 Jy/beam
! Combined flux in latest and established models = 1.30375 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 25 components and 1.30375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.251983Jy  sigma=4.440876
! Fit after  self-cal, rms=0.251981Jy  sigma=4.440830
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7908 x 2.585 at 15.25 degrees (North through East)
! Clean map  min=-0.017153  max=1.1363 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.98     NL        0.99     OV        1.05     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.97     NL        0.99     OV        1.05     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        0.98     OV        1.03     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.97     NL        1.00     OV        1.05     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.98     NL        0.99     OV        1.06     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.99     NL        1.01     OV        1.03     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        0.99     OV        1.05     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        0.99     OV        1.04     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.00     OV        1.04     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        0.99     OV        1.05     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        0.98     OV        1.06     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.00     NL        1.00     OV        1.03     
!   PT        0.96     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.251981Jy  sigma=4.440830
! Fit after  self-cal, rms=0.253063Jy  sigma=4.377073
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.795 mas, bmaj=2.596 mas, bpa=15.08 degrees
! Estimated noise=0.871838 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0043129 Jy
! Component: 100  -  total flux cleaned = -0.00473409 Jy
! Component: 150  -  total flux cleaned = -0.00502607 Jy
! Component: 200  -  total flux cleaned = -0.0051316 Jy
! Total flux subtracted in 200 components = -0.0051316 Jy
! Clean residual min=-0.006885 max=0.006943 Jy/beam
! Clean residual mean=-0.000007 rms=0.001512 Jy/beam
! Combined flux in latest and established models = 1.29861 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 1.29861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252810Jy  sigma=4.373076
! Fit after  self-cal, rms=0.252808Jy  sigma=4.373058
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252808Jy  sigma=4.373058
! Fit after  self-cal, rms=0.252587Jy  sigma=4.365919
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7948 mas, bmaj=2.598 mas, bpa=15.13 degrees
! Estimated noise=0.871282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00367519 Jy
! Component: 100  -  total flux cleaned = -0.00571111 Jy
! Component: 150  -  total flux cleaned = -0.00603794 Jy
! Component: 200  -  total flux cleaned = -0.00609339 Jy
! Total flux subtracted in 200 components = -0.00609339 Jy
! Clean residual min=-0.004438 max=0.004559 Jy/beam
! Clean residual mean=-0.000005 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 1.29252 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 46 components and 1.29252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252517Jy  sigma=4.365092
! Fit after  self-cal, rms=0.252517Jy  sigma=4.365089
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.75923e-05 Jy
! Component: 100  -  total flux cleaned = -9.85681e-05 Jy
! Component: 150  -  total flux cleaned = -0.000133996 Jy
! Component: 200  -  total flux cleaned = -0.000237808 Jy
! Total flux subtracted in 200 components = -0.000237808 Jy
! Clean residual min=-0.004427 max=0.004473 Jy/beam
! Clean residual mean=-0.000005 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 1.29228 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 1.29228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252504Jy  sigma=4.364914
! Fit after  self-cal, rms=0.252504Jy  sigma=4.364911
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252504Jy  sigma=4.364911
! Fit after  self-cal, rms=0.252489Jy  sigma=4.364595
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7956 mas, bmaj=2.6 mas, bpa=15.13 degrees
! Estimated noise=0.871446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00193157 Jy
! Component: 100  -  total flux cleaned = -0.00312058 Jy
! Component: 150  -  total flux cleaned = -0.00351602 Jy
! Component: 200  -  total flux cleaned = -0.0036471 Jy
! Total flux subtracted in 200 components = -0.0036471 Jy
! Clean residual min=-0.004296 max=0.004004 Jy/beam
! Clean residual mean=-0.000005 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 1.28864 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 1.28864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252470Jy  sigma=4.364376
! Fit after  self-cal, rms=0.252470Jy  sigma=4.364375
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.54152e-05 Jy
! Component: 100  -  total flux cleaned = -0.000210523 Jy
! Component: 150  -  total flux cleaned = -0.000272311 Jy
! Component: 200  -  total flux cleaned = -0.000311342 Jy
! Total flux subtracted in 200 components = -0.000311342 Jy
! Clean residual min=-0.004333 max=0.004018 Jy/beam
! Clean residual mean=-0.000005 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 1.28833 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 1.28833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252466Jy  sigma=4.364346
! Fit after  self-cal, rms=0.252466Jy  sigma=4.364345
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252466Jy  sigma=4.364345
! Fit after  self-cal, rms=0.252394Jy  sigma=4.364242
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.856 mas, bmaj=3.681 mas, bpa=-3.634 degrees
! Estimated noise=1.18957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128092 Jy
! Component: 100  -  total flux cleaned = -0.00172176 Jy
! Component: 150  -  total flux cleaned = -0.00179848 Jy
! Component: 200  -  total flux cleaned = -0.00182393 Jy
! Total flux subtracted in 200 components = -0.00182393 Jy
! Clean residual min=-0.004996 max=0.004950 Jy/beam
! Clean residual mean=-0.000008 rms=0.001483 Jy/beam
! Combined flux in latest and established models = 1.2865 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 1.2865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252390Jy  sigma=4.364285
! Fit after  self-cal, rms=0.252390Jy  sigma=4.364285
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.73682e-05 Jy
! Component: 100  -  total flux cleaned = -5.41912e-05 Jy
! Component: 150  -  total flux cleaned = -6.15467e-05 Jy
! Component: 200  -  total flux cleaned = -7.54483e-05 Jy
! Total flux subtracted in 200 components = -7.54483e-05 Jy
! Clean residual min=-0.004973 max=0.004936 Jy/beam
! Clean residual mean=-0.000008 rms=0.001482 Jy/beam
! Combined flux in latest and established models = 1.28643 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 68 components and 1.28643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252391Jy  sigma=4.364313
! Fit after  self-cal, rms=0.252391Jy  sigma=4.364312
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7961 mas, bmaj=2.601 mas, bpa=15.12 degrees
! Estimated noise=0.871424 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7961 x 2.601 at 15.12 degrees (North through East)
! Clean map  min=-0.0040366  max=1.1333 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.252391Jy  sigma=4.364312
! Fit after  self-cal, rms=0.234506Jy  sigma=4.060589
! Inverting map and beam 
! Estimated beam: bmin=0.7997 mas, bmaj=2.601 mas, bpa=15.17 degrees
! Estimated noise=0.82268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0509403 Jy
! Component: 100  -  total flux cleaned = -0.0678152 Jy
! Component: 150  -  total flux cleaned = -0.0772893 Jy
! Component: 200  -  total flux cleaned = -0.0826724 Jy
! Total flux subtracted in 200 components = -0.0826724 Jy
! Clean residual min=-0.009726 max=0.018341 Jy/beam
! Clean residual mean=-0.000020 rms=0.003567 Jy/beam
! Combined flux in latest and established models = 1.20375 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 1.20375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.223320Jy  sigma=3.882750
! Fit after  self-cal, rms=0.223321Jy  sigma=3.882749
! Inverting map 
! Added new window around map position (4.4, 35.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156688 Jy
! Component: 100  -  total flux cleaned = 0.0183314 Jy
! Component: 150  -  total flux cleaned = 0.0178004 Jy
! Component: 200  -  total flux cleaned = 0.0179166 Jy
! Total flux subtracted in 200 components = 0.0179166 Jy
! Clean residual min=-0.010204 max=0.015063 Jy/beam
! Clean residual mean=-0.000023 rms=0.002771 Jy/beam
! Combined flux in latest and established models = 1.22167 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 1.22167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.221965Jy  sigma=3.868759
! Fit after  self-cal, rms=0.221863Jy  sigma=3.865546
! Inverting map 
! Added new window around map position (4.2, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115837 Jy
! Component: 100  -  total flux cleaned = 0.0181451 Jy
! Component: 150  -  total flux cleaned = 0.0210361 Jy
! Component: 200  -  total flux cleaned = 0.0237205 Jy
! Total flux subtracted in 200 components = 0.0237205 Jy
! Clean residual min=-0.007169 max=0.007222 Jy/beam
! Clean residual mean=-0.000014 rms=0.001652 Jy/beam
! Combined flux in latest and established models = 1.24539 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 120 components and 1.24539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.220921Jy  sigma=3.856792
! Fit after  self-cal, rms=0.220894Jy  sigma=3.856110
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.220894Jy  sigma=3.856110
! Fit after  self-cal, rms=0.210304Jy  sigma=3.642740
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6041 mas, bmaj=2.472 mas, bpa=17.58 degrees
! Estimated noise=1.27863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.745143 Jy
! Component: 100  -  total flux cleaned = 0.955445 Jy
! Component: 150  -  total flux cleaned = 1.05168 Jy
! Component: 200  -  total flux cleaned = 1.0894 Jy
! Total flux subtracted in 200 components = 1.0894 Jy
! Clean residual min=-0.029429 max=0.031624 Jy/beam
! Clean residual mean=-0.000021 rms=0.006729 Jy/beam
! Combined flux in latest and established models = 1.08939 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 1.08939 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8034 mas, bmaj=2.602 mas, bpa=15.2 degrees
! Estimated noise=0.782562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385652 Jy
! Component: 100  -  total flux cleaned = 0.0635854 Jy
! Component: 150  -  total flux cleaned = 0.0816817 Jy
! Component: 200  -  total flux cleaned = 0.0922789 Jy
! Total flux subtracted in 200 components = 0.0922789 Jy
! Clean residual min=-0.010212 max=0.015001 Jy/beam
! Clean residual mean=-0.000026 rms=0.002837 Jy/beam
! Combined flux in latest and established models = 1.18167 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 31 components and 1.18167 Jy
! Inverting map 
! Added new window around map position (-4.4, -36.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00962387 Jy
! Component: 100  -  total flux cleaned = 0.0147533 Jy
! Component: 150  -  total flux cleaned = 0.0186147 Jy
! Component: 200  -  total flux cleaned = 0.0220452 Jy
! Total flux subtracted in 200 components = 0.0220452 Jy
! Clean residual min=-0.007420 max=0.008256 Jy/beam
! Clean residual mean=-0.000019 rms=0.001841 Jy/beam
! Combined flux in latest and established models = 1.20372 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 46 components and 1.20372 Jy
! Inverting map 
! Added new window around map position (5, -11.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.007269 Jy
! Component: 100  -  total flux cleaned = 0.00972243 Jy
! Component: 150  -  total flux cleaned = 0.0106872 Jy
! Component: 200  -  total flux cleaned = 0.0114132 Jy
! Total flux subtracted in 200 components = 0.0114132 Jy
! Clean residual min=-0.005881 max=0.005923 Jy/beam
! Clean residual mean=-0.000014 rms=0.001392 Jy/beam
! Combined flux in latest and established models = 1.21513 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 66 components and 1.21513 Jy
! Inverting map 
! Added new window around map position (-7.8, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00547583 Jy
! Component: 100  -  total flux cleaned = 0.00808068 Jy
! Component: 150  -  total flux cleaned = 0.00922243 Jy
! Component: 200  -  total flux cleaned = 0.0101458 Jy
! Total flux subtracted in 200 components = 0.0101458 Jy
! Clean residual min=-0.004837 max=0.003938 Jy/beam
! Clean residual mean=-0.000009 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 1.22528 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 100 components and 1.22528 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.862 mas, bmaj=3.713 mas, bpa=-3.756 degrees
! Estimated noise=1.05595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298334 Jy
! Component: 100  -  total flux cleaned = 0.00417941 Jy
! Component: 150  -  total flux cleaned = 0.00465828 Jy
! Component: 200  -  total flux cleaned = 0.00501907 Jy
! Total flux subtracted in 200 components = 0.00501907 Jy
! Clean residual min=-0.004445 max=0.004264 Jy/beam
! Clean residual mean=-0.000014 rms=0.001241 Jy/beam
! Combined flux in latest and established models = 1.2303 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026616 Jy
! Component: 100  -  total flux cleaned = 0.00026325 Jy
! Component: 150  -  total flux cleaned = 0.000319593 Jy
! Component: 200  -  total flux cleaned = 0.000261024 Jy
! Total flux subtracted in 200 components = 0.000261024 Jy
! Clean residual min=-0.004046 max=0.004048 Jy/beam
! Clean residual mean=-0.000013 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 1.23056 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 152 components and 1.23056 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8034 mas, bmaj=2.602 mas, bpa=15.2 degrees
! Estimated noise=0.782562 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128414 Jy
! Component: 100  -  total flux cleaned = -0.00144764 Jy
! Component: 150  -  total flux cleaned = -0.00158908 Jy
! Component: 200  -  total flux cleaned = -0.00158784 Jy
! Total flux subtracted in 200 components = -0.00158784 Jy
! Clean residual min=-0.003609 max=0.003372 Jy/beam
! Clean residual mean=-0.000007 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 1.22897 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 176 components and 1.22897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.197925Jy  sigma=3.486124
! Fit after  self-cal, rms=0.197891Jy  sigma=3.485407
wmodel /J1848+3219_X_map.mod
! wmodel: Unable to open new model file: /J1848+3219_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1848+3219_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8034 x 2.602 at 15.2 degrees (North through East)
! Clean map  min=-0.005789  max=1.0154 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1848+3219_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.01539 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000844051 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.249378 0.249378 0.498757 0.997513 1.99503 3.99005 7.98011 15.9602 31.9204 63.8409
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.015 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1202.99 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1848+3219_X_dfm.log closed on Fri May 20 00:18:14 2016