! Started logfile: /scr/pima/bg219a_uvs/J1827+2638_X_dfm.log on Fri May 20 00:17:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1827+2638_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1827+2638_X_uva.fits
! AN table 1: 48 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1827+2638
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7200 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1827+2638_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002825Jy  sigma=29.176837
! Fit after  self-cal, rms=0.928028Jy  sigma=26.965128
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6055 mas, bmaj=2.363 mas, bpa=10.16 degrees
! Estimated noise=0.781284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0530007 Jy
! Component: 100  -  total flux cleaned = 0.0710676 Jy
! Total flux subtracted in 100 components = 0.0710676 Jy
! Clean residual min=-0.006102 max=0.010395 Jy/beam
! Clean residual mean=0.000000 rms=0.001662 Jy/beam
! Combined flux in latest and established models = 0.0710675 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0710675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050082Jy  sigma=1.375983
! Fit after  self-cal, rms=0.049756Jy  sigma=1.367014
! Inverting map 
! Added new window around map position (19.2, 30.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00970906 Jy
! Component: 100  -  total flux cleaned = 0.0146904 Jy
! Total flux subtracted in 100 components = 0.0146904 Jy
! Clean residual min=-0.004550 max=0.004801 Jy/beam
! Clean residual mean=0.000001 rms=0.001131 Jy/beam
! Combined flux in latest and established models = 0.0857579 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.0857579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048003Jy  sigma=1.304703
! Fit after  self-cal, rms=0.047954Jy  sigma=1.302120
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8523 mas, bmaj=2.653 mas, bpa=8.918 degrees
! Estimated noise=0.290832 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00392474 Jy
! Component: 100  -  total flux cleaned = 0.0058768 Jy
! Component: 150  -  total flux cleaned = 0.00709406 Jy
! Component: 200  -  total flux cleaned = 0.00770919 Jy
! Total flux subtracted in 200 components = 0.00770919 Jy
! Clean residual min=-0.001914 max=0.002074 Jy/beam
! Clean residual mean=-0.000002 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0934671 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 0.0934671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047687Jy  sigma=1.291553
! Fit after  self-cal, rms=0.047698Jy  sigma=1.291184
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8523 x 2.653 at 8.918 degrees (North through East)
! Clean map  min=-0.0016642  max=0.070253 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        0.93     NL        0.96     OV        1.01     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.93     NL        1.07     OV        1.00     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.97     NL        1.00     OV        1.03     
!   PT        1.06     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.94     NL        1.03     OV        0.99     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.05     OV        0.96     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.17     NL        1.02     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.93     NL        1.07     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.04     NL        0.99     OV        1.00     
!   PT        0.93     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.07     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        0.92     NL        0.94     OV        1.04     
!   PT        0.95     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.047698Jy  sigma=1.291184
! Fit after  self-cal, rms=0.047851Jy  sigma=1.287041
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8569 mas, bmaj=2.667 mas, bpa=8.716 degrees
! Estimated noise=0.289817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000654874 Jy
! Component: 100  -  total flux cleaned = -0.00062578 Jy
! Component: 150  -  total flux cleaned = -0.000555271 Jy
! Component: 200  -  total flux cleaned = -0.000494498 Jy
! Total flux subtracted in 200 components = -0.000494498 Jy
! Clean residual min=-0.001503 max=0.001632 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.0929726 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 37 components and 0.0929726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047808Jy  sigma=1.286078
! Fit after  self-cal, rms=0.047837Jy  sigma=1.285873
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.047837Jy  sigma=1.285873
! Fit after  self-cal, rms=0.048951Jy  sigma=1.281733
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8553 mas, bmaj=2.664 mas, bpa=8.82 degrees
! Estimated noise=0.290757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143159 Jy
! Component: 100  -  total flux cleaned = 0.000171528 Jy
! Component: 150  -  total flux cleaned = 0.000171371 Jy
! Component: 200  -  total flux cleaned = 0.00017128 Jy
! Total flux subtracted in 200 components = 0.00017128 Jy
! Clean residual min=-0.001408 max=0.001587 Jy/beam
! Clean residual mean=0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0931439 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.0931439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048942Jy  sigma=1.281451
! Fit after  self-cal, rms=0.048978Jy  sigma=1.281303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-40.4, -26.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000434931 Jy
! Component: 100  -  total flux cleaned = 0.000253639 Jy
! Component: 150  -  total flux cleaned = 0.000220959 Jy
! Component: 200  -  total flux cleaned = 0.000197025 Jy
! Total flux subtracted in 200 components = 0.000197025 Jy
! Clean residual min=-0.001319 max=0.001377 Jy/beam
! Clean residual mean=0.000000 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.0933409 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 65 components and 0.0933409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048920Jy  sigma=1.279540
! Fit after  self-cal, rms=0.048910Jy  sigma=1.279374
! Inverting map 
! Added new window around map position (-1.2, 28.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000568081 Jy
! Component: 100  -  total flux cleaned = 0.000729772 Jy
! Component: 150  -  total flux cleaned = 0.000784327 Jy
! Component: 200  -  total flux cleaned = 0.000829539 Jy
! Total flux subtracted in 200 components = 0.000829539 Jy
! Clean residual min=-0.001228 max=0.001172 Jy/beam
! Clean residual mean=0.000000 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.0941705 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.0941705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048863Jy  sigma=1.278137
! Fit after  self-cal, rms=0.048861Jy  sigma=1.278004
! Inverting map 
! Added new window around map position (32.6, -44.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00080049 Jy
! Component: 100  -  total flux cleaned = 0.00119389 Jy
! Component: 150  -  total flux cleaned = 0.00123582 Jy
! Component: 200  -  total flux cleaned = 0.00123507 Jy
! Total flux subtracted in 200 components = 0.00123507 Jy
! Clean residual min=-0.001015 max=0.000968 Jy/beam
! Clean residual mean=0.000000 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0954055 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.0954055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048826Jy  sigma=1.277176
! Fit after  self-cal, rms=0.048824Jy  sigma=1.277111
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048824Jy  sigma=1.277111
! Fit after  self-cal, rms=0.048672Jy  sigma=1.276490
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8546 mas, bmaj=2.664 mas, bpa=8.844 degrees
! Estimated noise=0.289766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328872 Jy
! Component: 100  -  total flux cleaned = 0.000406933 Jy
! Component: 150  -  total flux cleaned = 0.000459872 Jy
! Component: 200  -  total flux cleaned = 0.000460218 Jy
! Total flux subtracted in 200 components = 0.000460218 Jy
! Clean residual min=-0.000939 max=0.000941 Jy/beam
! Clean residual mean=0.000000 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0958658 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 104 components and 0.0958658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048658Jy  sigma=1.276116
! Fit after  self-cal, rms=0.048659Jy  sigma=1.276084
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.08237e-05 Jy
! Component: 100  -  total flux cleaned = 5.13536e-05 Jy
! Component: 150  -  total flux cleaned = 7.99014e-05 Jy
! Component: 200  -  total flux cleaned = 8.02276e-05 Jy
! Total flux subtracted in 200 components = 8.02276e-05 Jy
! Clean residual min=-0.000904 max=0.000921 Jy/beam
! Clean residual mean=0.000000 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.095946 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 112 components and 0.095946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048651Jy  sigma=1.275865
! Fit after  self-cal, rms=0.048650Jy  sigma=1.275856
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048650Jy  sigma=1.275856
! Fit after  self-cal, rms=0.048621Jy  sigma=1.275827
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.069 mas, bmaj=3.848 mas, bpa=-9.017 degrees
! Estimated noise=0.349603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.15238e-05 Jy
! Component: 100  -  total flux cleaned = 0.000150111 Jy
! Component: 150  -  total flux cleaned = 0.000246515 Jy
! Component: 200  -  total flux cleaned = 0.000286583 Jy
! Total flux subtracted in 200 components = 0.000286583 Jy
! Clean residual min=-0.000708 max=0.000574 Jy/beam
! Clean residual mean=0.000001 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.0962326 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 140 components and 0.0962326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048619Jy  sigma=1.275764
! Fit after  self-cal, rms=0.048619Jy  sigma=1.275754
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.35188e-05 Jy
! Component: 100  -  total flux cleaned = 0.000186559 Jy
! Component: 150  -  total flux cleaned = 0.000222592 Jy
! Component: 200  -  total flux cleaned = 0.000263706 Jy
! Total flux subtracted in 200 components = 0.000263706 Jy
! Clean residual min=-0.000690 max=0.000557 Jy/beam
! Clean residual mean=0.000001 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.0964963 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 149 components and 0.0964963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048618Jy  sigma=1.275721
! Fit after  self-cal, rms=0.048617Jy  sigma=1.275715
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8547 mas, bmaj=2.665 mas, bpa=8.853 degrees
! Estimated noise=0.289622 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8547 x 2.665 at 8.853 degrees (North through East)
! Clean map  min=-0.0013805  max=0.070409 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6064 mas, bmaj=2.369 mas, bpa=10.03 degrees
! Estimated noise=0.776082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0526836 Jy
! Component: 100  -  total flux cleaned = 0.0716864 Jy
! Component: 150  -  total flux cleaned = 0.081436 Jy
! Component: 200  -  total flux cleaned = 0.0868538 Jy
! Total flux subtracted in 200 components = 0.0868538 Jy
! Clean residual min=-0.003893 max=0.004292 Jy/beam
! Clean residual mean=0.000001 rms=0.001021 Jy/beam
! Combined flux in latest and established models = 0.0868538 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0868538 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8547 mas, bmaj=2.665 mas, bpa=8.853 degrees
! Estimated noise=0.289622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00388347 Jy
! Component: 100  -  total flux cleaned = 0.00548387 Jy
! Component: 150  -  total flux cleaned = 0.00632939 Jy
! Component: 200  -  total flux cleaned = 0.00685597 Jy
! Total flux subtracted in 200 components = 0.00685597 Jy
! Clean residual min=-0.001410 max=0.001606 Jy/beam
! Clean residual mean=0.000001 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.0937098 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 30 components and 0.0937098 Jy
! Inverting map 
! Added new window around map position (9.2, 31.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110623 Jy
! Component: 100  -  total flux cleaned = 0.00128148 Jy
! Component: 150  -  total flux cleaned = 0.00143544 Jy
! Component: 200  -  total flux cleaned = 0.00147137 Jy
! Total flux subtracted in 200 components = 0.00147137 Jy
! Clean residual min=-0.001164 max=0.001101 Jy/beam
! Clean residual mean=0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0951812 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 48 components and 0.0951812 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.069 mas, bmaj=3.848 mas, bpa=-9.017 degrees
! Estimated noise=0.349603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029168 Jy
! Component: 100  -  total flux cleaned = 0.000394813 Jy
! Component: 150  -  total flux cleaned = 0.0005414 Jy
! Component: 200  -  total flux cleaned = 0.000691214 Jy
! Total flux subtracted in 200 components = 0.000691214 Jy
! Clean residual min=-0.000852 max=0.000729 Jy/beam
! Clean residual mean=0.000000 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.0958724 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106979 Jy
! Component: 100  -  total flux cleaned = 0.000220735 Jy
! Component: 150  -  total flux cleaned = 0.000326436 Jy
! Component: 200  -  total flux cleaned = 0.000425235 Jy
! Total flux subtracted in 200 components = 0.000425235 Jy
! Clean residual min=-0.000784 max=0.000685 Jy/beam
! Clean residual mean=0.000000 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0962976 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 90 components and 0.0962976 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8547 mas, bmaj=2.665 mas, bpa=8.853 degrees
! Estimated noise=0.289622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000224527 Jy
! Component: 100  -  total flux cleaned = -0.000248231 Jy
! Component: 150  -  total flux cleaned = -0.000296241 Jy
! Component: 200  -  total flux cleaned = -0.000341913 Jy
! Total flux subtracted in 200 components = -0.000341913 Jy
! Clean residual min=-0.001036 max=0.001008 Jy/beam
! Clean residual mean=0.000000 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0959557 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 106 components and 0.0959557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.048658Jy  sigma=1.276860
! Fit after  self-cal, rms=0.048652Jy  sigma=1.276604
wmodel /J1827+2638_X_map.mod
! wmodel: Unable to open new model file: /J1827+2638_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1827+2638_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8547 x 2.665 at 8.853 degrees (North through East)
! Clean map  min=-0.0011624  max=0.069563 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1827+2638_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0695635 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000217161 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.936531 0.936531 1.87306 3.74612 7.49225 14.9845 29.969 59.938
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.069 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  320.331 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1827+2638_X_dfm.log closed on Fri May 20 00:17:45 2016