! Started logfile: /scr/pima/bg219a_uvs/J1824+5651_X_dfm.log on Fri May 20 00:17:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1824+5651_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1824+5651_X_uva.fits
! AN table 1: 18 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1824+5651
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 2700 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1824+5651_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.226900Jy  sigma=28.994072
! Fit after  self-cal, rms=0.399445Jy  sigma=9.299286
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6128 mas, bmaj=1.98 mas, bpa=6.618 degrees
! Estimated noise=1.14634 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.48606 Jy
! Component: 100  -  total flux cleaned = 0.60229 Jy
! Total flux subtracted in 100 components = 0.60229 Jy
! Clean residual min=-0.033417 max=0.043459 Jy/beam
! Clean residual mean=-0.000177 rms=0.006935 Jy/beam
! Combined flux in latest and established models = 0.60229 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.60229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.175691Jy  sigma=4.054448
! Fit after  self-cal, rms=0.175550Jy  sigma=4.051692
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463173 Jy
! Component: 100  -  total flux cleaned = 0.0697947 Jy
! Total flux subtracted in 100 components = 0.0697947 Jy
! Clean residual min=-0.021916 max=0.023036 Jy/beam
! Clean residual mean=-0.000112 rms=0.004437 Jy/beam
! Combined flux in latest and established models = 0.672085 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.672085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.159189Jy  sigma=3.678706
! Fit after  self-cal, rms=0.158952Jy  sigma=3.674644
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8103 mas, bmaj=2.108 mas, bpa=4.698 degrees
! Estimated noise=0.633294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0231393 Jy
! Component: 100  -  total flux cleaned = 0.03403 Jy
! Component: 150  -  total flux cleaned = 0.0400568 Jy
! Component: 200  -  total flux cleaned = 0.0423065 Jy
! Total flux subtracted in 200 components = 0.0423065 Jy
! Clean residual min=-0.017062 max=0.023039 Jy/beam
! Clean residual mean=-0.000232 rms=0.004384 Jy/beam
! Combined flux in latest and established models = 0.714391 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.714391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.155771Jy  sigma=3.603395
! Fit after  self-cal, rms=0.155614Jy  sigma=3.600099
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8103 x 2.108 at 4.698 degrees (North through East)
! Clean map  min=-0.014804  max=0.6347 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        1.00     OV        1.08     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.03     NL        1.02     OV        1.08     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.03     NL        1.01     OV        1.08     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.03     OV        1.06     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.01     OV        1.07     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        1.02     OV        1.09     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.02     NL        1.02     OV        1.07     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.02     NL        1.02     OV        1.06     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.02     NL        1.02     OV        1.06     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.02     NL        1.00     OV        1.07     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.98     NL        1.00     OV        1.09     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.00     NL        1.02     OV        1.06     
!   PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.155614Jy  sigma=3.600099
! Fit after  self-cal, rms=0.157482Jy  sigma=3.508701
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8149 mas, bmaj=2.12 mas, bpa=4.75 degrees
! Estimated noise=0.634772 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00158153 Jy
! Component: 100  -  total flux cleaned = -0.00252204 Jy
! Component: 150  -  total flux cleaned = -0.00286888 Jy
! Component: 200  -  total flux cleaned = -0.00294703 Jy
! Total flux subtracted in 200 components = -0.00294703 Jy
! Clean residual min=-0.008004 max=0.009422 Jy/beam
! Clean residual mean=-0.000024 rms=0.002071 Jy/beam
! Combined flux in latest and established models = 0.711444 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 26 components and 0.711444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.157282Jy  sigma=3.505986
! Fit after  self-cal, rms=0.157258Jy  sigma=3.505470
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.157258Jy  sigma=3.505470
! Fit after  self-cal, rms=0.157568Jy  sigma=3.493754
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8164 mas, bmaj=2.127 mas, bpa=4.741 degrees
! Estimated noise=0.634736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00374618 Jy
! Component: 100  -  total flux cleaned = -0.00472978 Jy
! Component: 150  -  total flux cleaned = -0.00472889 Jy
! Component: 200  -  total flux cleaned = -0.00466707 Jy
! Total flux subtracted in 200 components = -0.00466707 Jy
! Clean residual min=-0.007694 max=0.008849 Jy/beam
! Clean residual mean=-0.000045 rms=0.001707 Jy/beam
! Combined flux in latest and established models = 0.706777 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.706777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.157436Jy  sigma=3.491984
! Fit after  self-cal, rms=0.157427Jy  sigma=3.491733
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00689419 Jy
! Component: 100  -  total flux cleaned = 0.00728405 Jy
! Component: 150  -  total flux cleaned = 0.00746487 Jy
! Component: 200  -  total flux cleaned = 0.00770004 Jy
! Total flux subtracted in 200 components = 0.00770004 Jy
! Clean residual min=-0.006667 max=0.005491 Jy/beam
! Clean residual mean=-0.000022 rms=0.001423 Jy/beam
! Combined flux in latest and established models = 0.714477 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 0.714477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.157057Jy  sigma=3.483652
! Fit after  self-cal, rms=0.157030Jy  sigma=3.483118
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.157030Jy  sigma=3.483118
! Fit after  self-cal, rms=0.156967Jy  sigma=3.482262
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8162 mas, bmaj=2.133 mas, bpa=4.767 degrees
! Estimated noise=0.633975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00097857 Jy
! Component: 100  -  total flux cleaned = 0.00057023 Jy
! Component: 150  -  total flux cleaned = 0.000460838 Jy
! Component: 200  -  total flux cleaned = 0.000409291 Jy
! Total flux subtracted in 200 components = 0.000409291 Jy
! Clean residual min=-0.006256 max=0.004888 Jy/beam
! Clean residual mean=-0.000024 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.714886 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 45 components and 0.714886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156893Jy  sigma=3.480983
! Fit after  self-cal, rms=0.156890Jy  sigma=3.480915
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164606 Jy
! Component: 100  -  total flux cleaned = 0.000117181 Jy
! Component: 150  -  total flux cleaned = 7.39236e-05 Jy
! Component: 200  -  total flux cleaned = 3.15834e-05 Jy
! Total flux subtracted in 200 components = 3.15834e-05 Jy
! Clean residual min=-0.006201 max=0.004751 Jy/beam
! Clean residual mean=-0.000025 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.714918 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 50 components and 0.714918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156863Jy  sigma=3.480388
! Fit after  self-cal, rms=0.156862Jy  sigma=3.480368
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156862Jy  sigma=3.480368
! Fit after  self-cal, rms=0.156930Jy  sigma=3.480206
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.008 mas, bmaj=2.986 mas, bpa=-32.65 degrees
! Estimated noise=0.824485 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.76065e-06 Jy
! Component: 100  -  total flux cleaned = 0.000491102 Jy
! Component: 150  -  total flux cleaned = 0.000693741 Jy
! Component: 200  -  total flux cleaned = 0.000637849 Jy
! Total flux subtracted in 200 components = 0.000637849 Jy
! Clean residual min=-0.006637 max=0.006835 Jy/beam
! Clean residual mean=-0.000053 rms=0.001969 Jy/beam
! Combined flux in latest and established models = 0.715556 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 56 components and 0.715556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156915Jy  sigma=3.479853
! Fit after  self-cal, rms=0.156912Jy  sigma=3.479752
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234365 Jy
! Component: 100  -  total flux cleaned = 0.000294074 Jy
! Component: 150  -  total flux cleaned = 0.000294503 Jy
! Component: 200  -  total flux cleaned = 0.000210329 Jy
! Total flux subtracted in 200 components = 0.000210329 Jy
! Clean residual min=-0.006638 max=0.006546 Jy/beam
! Clean residual mean=-0.000054 rms=0.001943 Jy/beam
! Combined flux in latest and established models = 0.715766 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.715766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156918Jy  sigma=3.479755
! Fit after  self-cal, rms=0.156917Jy  sigma=3.479718
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8162 mas, bmaj=2.135 mas, bpa=4.782 degrees
! Estimated noise=0.633862 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8162 x 2.135 at 4.782 degrees (North through East)
! Clean map  min=-0.0054107  max=0.63384 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.156917Jy  sigma=3.479718
! Fit after  self-cal, rms=0.145553Jy  sigma=3.223080
! Inverting map and beam 
! Estimated beam: bmin=0.8175 mas, bmaj=2.137 mas, bpa=4.806 degrees
! Estimated noise=0.600383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0260005 Jy
! Component: 100  -  total flux cleaned = -0.0317892 Jy
! Component: 150  -  total flux cleaned = -0.0330216 Jy
! Component: 200  -  total flux cleaned = -0.0332345 Jy
! Total flux subtracted in 200 components = -0.0332345 Jy
! Clean residual min=-0.007819 max=0.013304 Jy/beam
! Clean residual mean=-0.000091 rms=0.002423 Jy/beam
! Combined flux in latest and established models = 0.682532 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 67 components and 0.682532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.140714Jy  sigma=3.118731
! Fit after  self-cal, rms=0.140713Jy  sigma=3.118606
! Inverting map 
! Added new window around map position (5, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102131 Jy
! Component: 100  -  total flux cleaned = 0.0117265 Jy
! Component: 150  -  total flux cleaned = 0.0124045 Jy
! Component: 200  -  total flux cleaned = 0.0129549 Jy
! Total flux subtracted in 200 components = 0.0129549 Jy
! Clean residual min=-0.005675 max=0.006472 Jy/beam
! Clean residual mean=-0.000053 rms=0.001624 Jy/beam
! Combined flux in latest and established models = 0.695487 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 90 components and 0.695487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.139478Jy  sigma=3.097783
! Fit after  self-cal, rms=0.139420Jy  sigma=3.095790
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.139420Jy  sigma=3.095790
! Fit after  self-cal, rms=0.135648Jy  sigma=2.993608
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6203 mas, bmaj=1.997 mas, bpa=6.627 degrees
! Estimated noise=1.05633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.447563 Jy
! Component: 100  -  total flux cleaned = 0.554413 Jy
! Component: 150  -  total flux cleaned = 0.594834 Jy
! Component: 200  -  total flux cleaned = 0.618404 Jy
! Total flux subtracted in 200 components = 0.618404 Jy
! Clean residual min=-0.015261 max=0.017523 Jy/beam
! Clean residual mean=-0.000077 rms=0.003289 Jy/beam
! Combined flux in latest and established models = 0.618404 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.618404 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8184 mas, bmaj=2.143 mas, bpa=4.822 degrees
! Estimated noise=0.577426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205736 Jy
! Component: 100  -  total flux cleaned = 0.0328153 Jy
! Component: 150  -  total flux cleaned = 0.0397994 Jy
! Component: 200  -  total flux cleaned = 0.0449434 Jy
! Total flux subtracted in 200 components = 0.0449434 Jy
! Clean residual min=-0.008503 max=0.010216 Jy/beam
! Clean residual mean=-0.000111 rms=0.002241 Jy/beam
! Combined flux in latest and established models = 0.663347 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.663347 Jy
! Inverting map 
! Added new window around map position (-4.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00936395 Jy
! Component: 100  -  total flux cleaned = 0.0141775 Jy
! Component: 150  -  total flux cleaned = 0.0172049 Jy
! Component: 200  -  total flux cleaned = 0.0187347 Jy
! Total flux subtracted in 200 components = 0.0187347 Jy
! Clean residual min=-0.006206 max=0.005897 Jy/beam
! Clean residual mean=-0.000051 rms=0.001534 Jy/beam
! Combined flux in latest and established models = 0.682082 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 54 components and 0.682082 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.008 mas, bmaj=2.983 mas, bpa=-31.28 degrees
! Estimated noise=0.750096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00395764 Jy
! Component: 100  -  total flux cleaned = 0.0054853 Jy
! Component: 150  -  total flux cleaned = 0.00637786 Jy
! Component: 200  -  total flux cleaned = 0.0070503 Jy
! Total flux subtracted in 200 components = 0.0070503 Jy
! Clean residual min=-0.007222 max=0.005455 Jy/beam
! Clean residual mean=-0.000074 rms=0.001984 Jy/beam
! Combined flux in latest and established models = 0.689132 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000401936 Jy
! Component: 100  -  total flux cleaned = 0.00076874 Jy
! Component: 150  -  total flux cleaned = 0.00102382 Jy
! Component: 200  -  total flux cleaned = 0.00133754 Jy
! Total flux subtracted in 200 components = 0.00133754 Jy
! Clean residual min=-0.006209 max=0.004736 Jy/beam
! Clean residual mean=-0.000064 rms=0.001758 Jy/beam
! Combined flux in latest and established models = 0.69047 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 91 components and 0.69047 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8184 mas, bmaj=2.143 mas, bpa=4.822 degrees
! Estimated noise=0.577426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.34145e-05 Jy
! Component: 100  -  total flux cleaned = 0.000290165 Jy
! Component: 150  -  total flux cleaned = 0.000721833 Jy
! Component: 200  -  total flux cleaned = 0.00111493 Jy
! Total flux subtracted in 200 components = 0.00111493 Jy
! Clean residual min=-0.004881 max=0.004249 Jy/beam
! Clean residual mean=-0.000023 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 0.691585 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 0.691585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131019Jy  sigma=2.909642
! Fit after  self-cal, rms=0.130980Jy  sigma=2.908672
wmodel /J1824+5651_X_map.mod
! wmodel: Unable to open new model file: /J1824+5651_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1824+5651_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8184 x 2.143 at 4.822 degrees (North through East)
! Clean map  min=-0.0044828  max=0.57068 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1824+5651_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.570679 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00112202 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.589835 0.589835 1.17967 2.35934 4.71868 9.43736 18.8747 37.7494 75.4989
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0033 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.57 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  508.616 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1824+5651_X_dfm.log closed on Fri May 20 00:17:38 2016