! Started logfile: /scr/pima/bg219a_uvs/J1735+0808_S_uvs.log on Wed Apr 6 23:00:50 2016 obs /scr/pima/bg219a_uvs/J1735+0808_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1735+0808_S_uva.fits ! AN table 1: 41 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.811382 visibilities/baseline/integration-bin. ! Found source: J1735+0808 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 1996 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J1735+0808_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010394Jy sigma=22.009481 ! Fit after self-cal, rms=0.825091Jy sigma=18.082233 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.488 mas, bmaj=6.156 mas, bpa=-2.596 degrees ! Estimated noise=1.32874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130262 Jy ! Component: 100 - total flux cleaned = 0.16843 Jy ! Total flux subtracted in 100 components = 0.16843 Jy ! Clean residual min=-0.008823 max=0.016682 Jy/beam ! Clean residual mean=0.000042 rms=0.002791 Jy/beam ! Combined flux in latest and established models = 0.16843 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.16843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069624Jy sigma=1.384809 ! Fit after self-cal, rms=0.069583Jy sigma=1.383975 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178012 Jy ! Component: 100 - total flux cleaned = 0.0262233 Jy ! Total flux subtracted in 100 components = 0.0262233 Jy ! Clean residual min=-0.006028 max=0.007561 Jy/beam ! Clean residual mean=0.000014 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.194653 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.194653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063653Jy sigma=1.246633 ! Fit after self-cal, rms=0.063635Jy sigma=1.245851 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.179 mas, bpa=-3.473 degrees ! Estimated noise=0.750978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00779493 Jy ! Component: 100 - total flux cleaned = 0.012038 Jy ! Component: 150 - total flux cleaned = 0.0146884 Jy ! Component: 200 - total flux cleaned = 0.0163888 Jy ! Total flux subtracted in 200 components = 0.0163888 Jy ! Clean residual min=-0.004827 max=0.005764 Jy/beam ! Clean residual mean=-0.000005 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.211042 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.211042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062556Jy sigma=1.223696 ! Fit after self-cal, rms=0.062575Jy sigma=1.223481 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.916 x 7.179 at -3.473 degrees (North through East) ! Clean map min=-0.004631 max=0.17322 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! LA 0.96 MK 1.06 NL 1.04 OV 1.02 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 1.03 NL 1.03 OV 1.02 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! LA 0.99 MK 0.97 NL 1.01 OV 1.02 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! LA 1.01 MK 0.99 NL 0.95 OV 0.91 ! PT 0.91 SC 0.96 ! ! ! Fit before self-cal, rms=0.062575Jy sigma=1.223481 ! Fit after self-cal, rms=0.060714Jy sigma=1.201399 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=7.186 mas, bpa=-3.367 degrees ! Estimated noise=0.749936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326777 Jy ! Component: 100 - total flux cleaned = -0.000397225 Jy ! Component: 150 - total flux cleaned = -0.00042929 Jy ! Component: 200 - total flux cleaned = -0.000456942 Jy ! Total flux subtracted in 200 components = -0.000456942 Jy ! Clean residual min=-0.004772 max=0.005124 Jy/beam ! Clean residual mean=-0.000006 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.210585 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 27 components and 0.210585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060670Jy sigma=1.200856 ! Fit after self-cal, rms=0.060703Jy sigma=1.200716 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060703Jy sigma=1.200716 ! Fit after self-cal, rms=0.059830Jy sigma=1.188238 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.168 mas, bpa=-3.321 degrees ! Estimated noise=0.748709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000236277 Jy ! Component: 100 - total flux cleaned = -0.000184707 Jy ! Component: 150 - total flux cleaned = -0.000206919 Jy ! Component: 200 - total flux cleaned = -0.000207282 Jy ! Total flux subtracted in 200 components = -0.000207282 Jy ! Clean residual min=-0.003724 max=0.005028 Jy/beam ! Clean residual mean=-0.000003 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.210378 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.210378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059807Jy sigma=1.187847 ! Fit after self-cal, rms=0.059801Jy sigma=1.187741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434063 Jy ! Component: 100 - total flux cleaned = 0.0063584 Jy ! Component: 150 - total flux cleaned = 0.00765621 Jy ! Component: 200 - total flux cleaned = 0.00814399 Jy ! Total flux subtracted in 200 components = 0.00814399 Jy ! Clean residual min=-0.003276 max=0.003230 Jy/beam ! Clean residual mean=-0.000008 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.218522 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.218522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059514Jy sigma=1.180088 ! Fit after self-cal, rms=0.059486Jy sigma=1.179295 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059486Jy sigma=1.179295 ! Fit after self-cal, rms=0.059347Jy sigma=1.178324 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=7.17 mas, bpa=-3.363 degrees ! Estimated noise=0.747232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183483 Jy ! Component: 100 - total flux cleaned = 0.00280658 Jy ! Component: 150 - total flux cleaned = 0.00292874 Jy ! Component: 200 - total flux cleaned = 0.00300984 Jy ! Total flux subtracted in 200 components = 0.00300984 Jy ! Clean residual min=-0.003058 max=0.003026 Jy/beam ! Clean residual mean=-0.000006 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.221531 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.221531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059288Jy sigma=1.176726 ! Fit after self-cal, rms=0.059280Jy sigma=1.176543 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.5, 47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191863 Jy ! Component: 100 - total flux cleaned = 0.00230187 Jy ! Component: 150 - total flux cleaned = 0.00259291 Jy ! Component: 200 - total flux cleaned = 0.00296698 Jy ! Total flux subtracted in 200 components = 0.00296698 Jy ! Clean residual min=-0.002624 max=0.002426 Jy/beam ! Clean residual mean=-0.000004 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.224498 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.224498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059162Jy sigma=1.173567 ! Fit after self-cal, rms=0.059151Jy sigma=1.173371 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059151Jy sigma=1.173371 ! Fit after self-cal, rms=0.059189Jy sigma=1.172848 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.419 mas, bmaj=14 mas, bpa=-7.983 degrees ! Estimated noise=0.97029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000972482 Jy ! Component: 100 - total flux cleaned = 0.0013215 Jy ! Component: 150 - total flux cleaned = 0.00159939 Jy ! Component: 200 - total flux cleaned = 0.00166863 Jy ! Total flux subtracted in 200 components = 0.00166863 Jy ! Clean residual min=-0.002123 max=0.002290 Jy/beam ! Clean residual mean=-0.000007 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.226167 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 113 components and 0.226167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059177Jy sigma=1.172576 ! Fit after self-cal, rms=0.059182Jy sigma=1.172555 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214593 Jy ! Component: 100 - total flux cleaned = 0.000154949 Jy ! Component: 150 - total flux cleaned = 6.7801e-05 Jy ! Component: 200 - total flux cleaned = -2.87919e-06 Jy ! Total flux subtracted in 200 components = -2.87919e-06 Jy ! Clean residual min=-0.002005 max=0.002266 Jy/beam ! Clean residual mean=-0.000007 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.226164 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 0.226164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059178Jy sigma=1.172457 ! Fit after self-cal, rms=0.059177Jy sigma=1.172454 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=7.171 mas, bpa=-3.393 degrees ! Estimated noise=0.746381 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.923 x 7.171 at -3.393 degrees (North through East) ! Clean map min=-0.0024824 max=0.17237 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=6.152 mas, bpa=-2.657 degrees ! Estimated noise=1.31024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128353 Jy ! Component: 100 - total flux cleaned = 0.166411 Jy ! Component: 150 - total flux cleaned = 0.184138 Jy ! Component: 200 - total flux cleaned = 0.192629 Jy ! Total flux subtracted in 200 components = 0.192629 Jy ! Clean residual min=-0.005869 max=0.005720 Jy/beam ! Clean residual mean=0.000019 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.192629 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.192629 Jy ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=7.171 mas, bpa=-3.393 degrees ! Estimated noise=0.746381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879517 Jy ! Component: 100 - total flux cleaned = 0.0140499 Jy ! Component: 150 - total flux cleaned = 0.0179879 Jy ! Component: 200 - total flux cleaned = 0.0207742 Jy ! Total flux subtracted in 200 components = 0.0207742 Jy ! Clean residual min=-0.003313 max=0.003149 Jy/beam ! Clean residual mean=0.000006 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.213403 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 47 components and 0.213403 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.419 mas, bmaj=14 mas, bpa=-7.983 degrees ! Estimated noise=0.97029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411265 Jy ! Component: 100 - total flux cleaned = 0.00650498 Jy ! Component: 150 - total flux cleaned = 0.0081858 Jy ! Component: 200 - total flux cleaned = 0.00938434 Jy ! Total flux subtracted in 200 components = 0.00938434 Jy ! Clean residual min=-0.002425 max=0.002004 Jy/beam ! Clean residual mean=-0.000004 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.222788 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078273 Jy ! Component: 100 - total flux cleaned = 0.00117894 Jy ! Component: 150 - total flux cleaned = 0.00150836 Jy ! Component: 200 - total flux cleaned = 0.00165079 Jy ! Total flux subtracted in 200 components = 0.00165079 Jy ! Clean residual min=-0.002103 max=0.001997 Jy/beam ! Clean residual mean=-0.000005 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.224438 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 96 components and 0.224438 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=7.171 mas, bpa=-3.393 degrees ! Estimated noise=0.746381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.44533e-06 Jy ! Component: 100 - total flux cleaned = 0.000537086 Jy ! Component: 150 - total flux cleaned = 0.000583896 Jy ! Component: 200 - total flux cleaned = 0.000624642 Jy ! Total flux subtracted in 200 components = 0.000624642 Jy ! Clean residual min=-0.002587 max=0.002173 Jy/beam ! Clean residual mean=-0.000001 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.225063 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 115 components and 0.225063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059214Jy sigma=1.173300 ! Fit after self-cal, rms=0.059199Jy sigma=1.173136 wmodel /scr/pima/bg219a_uvs/J1735+0808_S_map.mod ! Writing 115 model components to file: /scr/pima/bg219a_uvs/J1735+0808_S_map.mod wobs /scr/pima/bg219a_uvs/J1735+0808_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J1735+0808_S_uvs.fits wwins /scr/pima/bg219a_uvs/J1735+0808_S_map.win ! wwins: Wrote 3 windows to /scr/pima/bg219a_uvs/J1735+0808_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115143 Jy ! Component: 100 - total flux cleaned = -0.00184632 Jy ! Component: 150 - total flux cleaned = -0.00221825 Jy ! Component: 200 - total flux cleaned = -0.00259988 Jy ! Component: 250 - total flux cleaned = -0.00302426 Jy ! Component: 300 - total flux cleaned = -0.00342872 Jy ! Component: 350 - total flux cleaned = -0.00375621 Jy ! Component: 400 - total flux cleaned = -0.00407255 Jy ! Component: 450 - total flux cleaned = -0.00426738 Jy ! Component: 500 - total flux cleaned = -0.00456294 Jy ! Component: 550 - total flux cleaned = -0.00471947 Jy ! Component: 600 - total flux cleaned = -0.00492217 Jy ! Component: 650 - total flux cleaned = -0.00507036 Jy ! Component: 700 - total flux cleaned = -0.00523866 Jy ! Component: 750 - total flux cleaned = -0.00545006 Jy ! Component: 800 - total flux cleaned = -0.00563355 Jy ! Component: 850 - total flux cleaned = -0.0057459 Jy ! Component: 900 - total flux cleaned = -0.00581165 Jy ! Component: 950 - total flux cleaned = -0.00585503 Jy ! Component: 1000 - total flux cleaned = -0.00600284 Jy ! Component: 1050 - total flux cleaned = -0.00604425 Jy ! Component: 1100 - total flux cleaned = -0.00618733 Jy ! Component: 1150 - total flux cleaned = -0.00630774 Jy ! Component: 1200 - total flux cleaned = -0.0064262 Jy ! Component: 1250 - total flux cleaned = -0.00658162 Jy ! Component: 1300 - total flux cleaned = -0.00669621 Jy ! Component: 1350 - total flux cleaned = -0.0068471 Jy ! Component: 1400 - total flux cleaned = -0.00699584 Jy ! Component: 1450 - total flux cleaned = -0.00716064 Jy ! Component: 1500 - total flux cleaned = -0.00730495 Jy ! Component: 1550 - total flux cleaned = -0.00746509 Jy ! Component: 1600 - total flux cleaned = -0.00758759 Jy ! Component: 1650 - total flux cleaned = -0.0076914 Jy ! Component: 1700 - total flux cleaned = -0.00781076 Jy ! Component: 1750 - total flux cleaned = -0.00787791 Jy ! Component: 1800 - total flux cleaned = -0.00801085 Jy ! Component: 1850 - total flux cleaned = -0.00799442 Jy ! Component: 1900 - total flux cleaned = -0.00809201 Jy ! Component: 1950 - total flux cleaned = -0.008204 Jy ! Component: 2000 - total flux cleaned = -0.00821963 Jy ! Component: 2050 - total flux cleaned = -0.00831352 Jy ! Component: 2100 - total flux cleaned = -0.00839088 Jy ! Component: 2150 - total flux cleaned = -0.00849793 Jy ! Component: 2200 - total flux cleaned = -0.0085435 Jy ! Component: 2250 - total flux cleaned = -0.00866343 Jy ! Component: 2300 - total flux cleaned = -0.00879644 Jy ! Component: 2350 - total flux cleaned = -0.00888416 Jy ! Component: 2400 - total flux cleaned = -0.0089566 Jy ! Component: 2450 - total flux cleaned = -0.00902834 Jy ! Component: 2500 - total flux cleaned = -0.0090995 Jy ! Component: 2550 - total flux cleaned = -0.00916976 Jy ! Component: 2600 - total flux cleaned = -0.00922574 Jy ! Component: 2650 - total flux cleaned = -0.00926739 Jy ! Component: 2700 - total flux cleaned = -0.0093638 Jy ! Component: 2750 - total flux cleaned = -0.00941847 Jy ! Component: 2800 - total flux cleaned = -0.00949999 Jy ! Component: 2850 - total flux cleaned = -0.00955403 Jy ! Component: 2900 - total flux cleaned = -0.00964787 Jy ! Component: 2950 - total flux cleaned = -0.0097279 Jy ! Component: 3000 - total flux cleaned = -0.00986032 Jy ! Component: 3050 - total flux cleaned = -0.00992626 Jy ! Component: 3100 - total flux cleaned = -0.0100442 Jy ! Component: 3150 - total flux cleaned = -0.0101486 Jy ! Component: 3200 - total flux cleaned = -0.0102265 Jy ! Component: 3250 - total flux cleaned = -0.010304 Jy ! Component: 3300 - total flux cleaned = -0.0103942 Jy ! Component: 3350 - total flux cleaned = -0.0104839 Jy ! Component: 3400 - total flux cleaned = -0.0105479 Jy ! Component: 3450 - total flux cleaned = -0.0106627 Jy ! Component: 3500 - total flux cleaned = -0.0107389 Jy ! Component: 3550 - total flux cleaned = -0.0108402 Jy ! Component: 3600 - total flux cleaned = -0.0108908 Jy ! Component: 3650 - total flux cleaned = -0.0109664 Jy ! Component: 3700 - total flux cleaned = -0.0110293 Jy ! Component: 3750 - total flux cleaned = -0.0111046 Jy ! Component: 3800 - total flux cleaned = -0.0111672 Jy ! Component: 3850 - total flux cleaned = -0.0112797 Jy ! Component: 3900 - total flux cleaned = -0.011342 Jy ! Component: 3950 - total flux cleaned = -0.0114044 Jy ! Component: 4000 - total flux cleaned = -0.011479 Jy ! Component: 4050 - total flux cleaned = -0.0115658 Jy ! Total flux subtracted in 4096 components = -0.0116401 Jy ! Clean residual min=-0.000837 max=0.000750 Jy/beam ! Clean residual mean=-0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.213423 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 338 components and 0.213423 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J1735+0808_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.923 x 7.171 at -3.393 degrees (North through East) ! Clean map min=-0.0016146 max=0.17351 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1735+0808_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.173506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196177 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.339198 0.339198 0.678396 1.35679 2.71358 5.42717 10.8543 21.7087 43.4174 86.8347 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.173 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 884.438 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1735+0808_S_uvs.log closed on Wed Apr 6 23:00:54 2016