! Started logfile: /scr/pima/bg219a_uvs/J1733-1304_S_dfm.log on Fri May 20 00:16:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1733-1304_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1733-1304_S_uva.fits
! AN table 1: 29 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.650575 visibilities/baseline/integration-bin.
! Found source: J1733-1304
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1132 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1733-1304_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.455181Jy  sigma=24.807748
! Fit after  self-cal, rms=1.393210Jy  sigma=12.580486
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.131 mas, bmaj=5.78 mas, bpa=-2.532 degrees
! Estimated noise=2.61394 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.32528 Jy
! Component: 100  -  total flux cleaned = 1.71378 Jy
! Total flux subtracted in 100 components = 1.71378 Jy
! Clean residual min=-0.150857 max=0.189517 Jy/beam
! Clean residual mean=0.000923 rms=0.045046 Jy/beam
! Combined flux in latest and established models = 1.71378 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.71378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.932486Jy  sigma=8.064286
! Fit after  self-cal, rms=0.931728Jy  sigma=8.055673
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.349 mas, bmaj=6.636 mas, bpa=-5.836 degrees
! Estimated noise=2.17848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.466426 Jy
! Component: 100  -  total flux cleaned = 0.775526 Jy
! Component: 150  -  total flux cleaned = 0.984993 Jy
! Component: 200  -  total flux cleaned = 1.12841 Jy
! Total flux subtracted in 200 components = 1.12841 Jy
! Clean residual min=-0.122317 max=0.200938 Jy/beam
! Clean residual mean=0.000662 rms=0.041038 Jy/beam
! Combined flux in latest and established models = 2.84219 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 56 components and 2.84219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.413810Jy  sigma=3.852745
! Fit after  self-cal, rms=0.403221Jy  sigma=3.781963
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.349 x 6.636 at -5.836 degrees (North through East)
! Clean map  min=-0.11379  max=1.9568 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.88     MK        1.13     NL        0.97     OV        1.01     
!   PT        0.92     SC        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.88     MK        1.09     NL        0.99     OV        0.94     
!   PT        0.92     SC        1.12     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.00     NL        0.99     OV        0.95     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.89     MK        1.00     NL        0.98     OV        0.96     
!   PT        1.09     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.403221Jy  sigma=3.781963
! Fit after  self-cal, rms=0.335985Jy  sigma=3.091837
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.404 mas, bmaj=6.738 mas, bpa=-6.056 degrees
! Estimated noise=2.13976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 26.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136785 Jy
! Component: 100  -  total flux cleaned = 0.159687 Jy
! Component: 150  -  total flux cleaned = 0.166984 Jy
! Component: 200  -  total flux cleaned = 0.172987 Jy
! Total flux subtracted in 200 components = 0.172987 Jy
! Clean residual min=-0.065299 max=0.074034 Jy/beam
! Clean residual mean=0.000018 rms=0.016487 Jy/beam
! Combined flux in latest and established models = 3.01518 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 88 components and 3.01518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.253050Jy  sigma=2.209703
! Fit after  self-cal, rms=0.241700Jy  sigma=2.097976
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.241700Jy  sigma=2.097976
! Fit after  self-cal, rms=0.184191Jy  sigma=1.654647
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.38 mas, bmaj=6.701 mas, bpa=-6.086 degrees
! Estimated noise=2.10908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.048702 Jy
! Component: 100  -  total flux cleaned = 0.0539363 Jy
! Component: 150  -  total flux cleaned = 0.0569486 Jy
! Component: 200  -  total flux cleaned = 0.0593682 Jy
! Total flux subtracted in 200 components = 0.0593682 Jy
! Clean residual min=-0.041519 max=0.039078 Jy/beam
! Clean residual mean=-0.000026 rms=0.009658 Jy/beam
! Combined flux in latest and established models = 3.07454 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 108 components and 3.07454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164766Jy  sigma=1.460221
! Fit after  self-cal, rms=0.161265Jy  sigma=1.433328
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139195 Jy
! Component: 100  -  total flux cleaned = 0.016927 Jy
! Component: 150  -  total flux cleaned = 0.0207661 Jy
! Component: 200  -  total flux cleaned = 0.0230785 Jy
! Total flux subtracted in 200 components = 0.0230785 Jy
! Clean residual min=-0.037320 max=0.034194 Jy/beam
! Clean residual mean=-0.000037 rms=0.008647 Jy/beam
! Combined flux in latest and established models = 3.09762 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 126 components and 3.09762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154283Jy  sigma=1.365342
! Fit after  self-cal, rms=0.153267Jy  sigma=1.356369
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153267Jy  sigma=1.356369
! Fit after  self-cal, rms=0.145985Jy  sigma=1.321702
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.376 mas, bmaj=6.702 mas, bpa=-6.079 degrees
! Estimated noise=2.09896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155898 Jy
! Component: 100  -  total flux cleaned = 0.017997 Jy
! Component: 150  -  total flux cleaned = 0.0180161 Jy
! Component: 200  -  total flux cleaned = 0.0180185 Jy
! Total flux subtracted in 200 components = 0.0180185 Jy
! Clean residual min=-0.031225 max=0.029528 Jy/beam
! Clean residual mean=-0.000034 rms=0.007367 Jy/beam
! Combined flux in latest and established models = 3.11564 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 140 components and 3.11564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140753Jy  sigma=1.269038
! Fit after  self-cal, rms=0.140040Jy  sigma=1.263839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00542446 Jy
! Component: 100  -  total flux cleaned = 0.0067574 Jy
! Component: 150  -  total flux cleaned = 0.00758144 Jy
! Component: 200  -  total flux cleaned = 0.00757238 Jy
! Total flux subtracted in 200 components = 0.00757238 Jy
! Clean residual min=-0.030750 max=0.028210 Jy/beam
! Clean residual mean=-0.000036 rms=0.006952 Jy/beam
! Combined flux in latest and established models = 3.12321 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 150 components and 3.12321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137061Jy  sigma=1.237068
! Fit after  self-cal, rms=0.136647Jy  sigma=1.234561
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136647Jy  sigma=1.234561
! Fit after  self-cal, rms=0.134745Jy  sigma=1.225911
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.937 mas, bmaj=14.47 mas, bpa=-6.674 degrees
! Estimated noise=3.94056 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210526 Jy
! Component: 100  -  total flux cleaned = 0.0223579 Jy
! Component: 150  -  total flux cleaned = 0.0234146 Jy
! Component: 200  -  total flux cleaned = 0.0234091 Jy
! Total flux subtracted in 200 components = 0.0234091 Jy
! Clean residual min=-0.040650 max=0.043606 Jy/beam
! Clean residual mean=-0.000100 rms=0.012974 Jy/beam
! Combined flux in latest and established models = 3.14662 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 156 components and 3.14662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133158Jy  sigma=1.219969
! Fit after  self-cal, rms=0.132396Jy  sigma=1.209923
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00426824 Jy
! Component: 100  -  total flux cleaned = 0.00556123 Jy
! Component: 150  -  total flux cleaned = 0.00554711 Jy
! Component: 200  -  total flux cleaned = 0.00554196 Jy
! Total flux subtracted in 200 components = 0.00554196 Jy
! Clean residual min=-0.037560 max=0.042105 Jy/beam
! Clean residual mean=-0.000097 rms=0.012580 Jy/beam
! Combined flux in latest and established models = 3.15216 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 164 components and 3.15216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131076Jy  sigma=1.202782
! Fit after  self-cal, rms=0.130817Jy  sigma=1.199234
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.373 mas, bmaj=6.706 mas, bpa=-6.083 degrees
! Estimated noise=2.09592 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.373 x 6.706 at -6.083 degrees (North through East)
! Clean map  min=-0.06591  max=1.8744 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130817Jy  sigma=1.199234
! Fit after  self-cal, rms=0.104971Jy  sigma=0.863143
! Inverting map and beam 
! Estimated beam: bmin=2.367 mas, bmaj=6.726 mas, bpa=-6.156 degrees
! Estimated noise=2.0897 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00741443 Jy
! Component: 100  -  total flux cleaned = 0.00776677 Jy
! Component: 150  -  total flux cleaned = 0.0074702 Jy
! Component: 200  -  total flux cleaned = 0.00718335 Jy
! Total flux subtracted in 200 components = 0.00718335 Jy
! Clean residual min=-0.022206 max=0.024491 Jy/beam
! Clean residual mean=-0.000028 rms=0.005388 Jy/beam
! Combined flux in latest and established models = 3.15935 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 174 components and 3.15935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101956Jy  sigma=0.836198
! Fit after  self-cal, rms=0.101392Jy  sigma=0.833598
! Inverting map 
! Added new window around map position (11.5, -14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0186847 Jy
! Component: 100  -  total flux cleaned = 0.0233725 Jy
! Component: 150  -  total flux cleaned = 0.0265695 Jy
! Component: 200  -  total flux cleaned = 0.0288773 Jy
! Total flux subtracted in 200 components = 0.0288773 Jy
! Clean residual min=-0.017599 max=0.018293 Jy/beam
! Clean residual mean=-0.000027 rms=0.004507 Jy/beam
! Combined flux in latest and established models = 3.18823 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 195 components and 3.18823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092148Jy  sigma=0.750329
! Fit after  self-cal, rms=0.091144Jy  sigma=0.739439
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091144Jy  sigma=0.739439
! Fit after  self-cal, rms=0.088521Jy  sigma=0.726205
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=5.795 mas, bpa=-2.747 degrees
! Estimated noise=2.53983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.28586 Jy
! Component: 100  -  total flux cleaned = 1.67149 Jy
! Component: 150  -  total flux cleaned = 1.90946 Jy
! Component: 200  -  total flux cleaned = 2.09466 Jy
! Total flux subtracted in 200 components = 2.09466 Jy
! Clean residual min=-0.113002 max=0.143989 Jy/beam
! Clean residual mean=0.000575 rms=0.032163 Jy/beam
! Combined flux in latest and established models = 2.09466 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 2.09466 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.366 mas, bmaj=6.722 mas, bpa=-6.159 degrees
! Estimated noise=2.08959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.287876 Jy
! Component: 100  -  total flux cleaned = 0.492991 Jy
! Component: 150  -  total flux cleaned = 0.644615 Jy
! Component: 200  -  total flux cleaned = 0.757803 Jy
! Total flux subtracted in 200 components = 0.757803 Jy
! Clean residual min=-0.063667 max=0.093110 Jy/beam
! Clean residual mean=0.000304 rms=0.022576 Jy/beam
! Combined flux in latest and established models = 2.85246 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 57 components and 2.85246 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.921 mas, bmaj=14.48 mas, bpa=-6.83 degrees
! Estimated noise=3.95618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193591 Jy
! Component: 100  -  total flux cleaned = 0.275933 Jy
! Component: 150  -  total flux cleaned = 0.323163 Jy
! Component: 200  -  total flux cleaned = 0.334616 Jy
! Total flux subtracted in 200 components = 0.334616 Jy
! Clean residual min=-0.047827 max=0.042919 Jy/beam
! Clean residual mean=-0.000016 rms=0.014768 Jy/beam
! Combined flux in latest and established models = 3.18708 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00875854 Jy
! Component: 100  -  total flux cleaned = 0.0138708 Jy
! Component: 150  -  total flux cleaned = 0.0179815 Jy
! Component: 200  -  total flux cleaned = 0.0208469 Jy
! Total flux subtracted in 200 components = 0.0208469 Jy
! Clean residual min=-0.034255 max=0.032791 Jy/beam
! Clean residual mean=-0.000056 rms=0.010536 Jy/beam
! Combined flux in latest and established models = 3.20792 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 100 components and 3.20792 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.366 mas, bmaj=6.722 mas, bpa=-6.159 degrees
! Estimated noise=2.08959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00876081 Jy
! Component: 100  -  total flux cleaned = -0.00435536 Jy
! Component: 150  -  total flux cleaned = -0.00440751 Jy
! Component: 200  -  total flux cleaned = -0.00355927 Jy
! Total flux subtracted in 200 components = -0.00355927 Jy
! Clean residual min=-0.026706 max=0.023634 Jy/beam
! Clean residual mean=-0.000018 rms=0.005815 Jy/beam
! Combined flux in latest and established models = 3.20437 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 124 components and 3.20437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098519Jy  sigma=0.875437
! Fit after  self-cal, rms=0.098200Jy  sigma=0.853450
wmodel /J1733-1304_S_map.mod
! wmodel: Unable to open new model file: /J1733-1304_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1733-1304_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.366 x 6.722 at -6.159 degrees (North through East)
! Clean map  min=-0.044305  max=1.8691 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1733-1304_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.8691 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00557053 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.894097 0.894097 1.78819 3.57639 7.15278 14.3056 28.6111 57.2222
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0167 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.869 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  335.533 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1733-1304_S_dfm.log closed on Fri May 20 00:16:30 2016