! Started logfile: /scr/pima/bg219a_uvs/J1714-0558_S_dfm.log on Fri May 20 00:15:46 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1714-0558_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1714-0558_S_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.825926 visibilities/baseline/integration-bin.
! Found source: J1714-0558
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1714-0558_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.093586Jy  sigma=20.256611
! Fit after  self-cal, rms=0.665450Jy  sigma=13.281812
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.16 mas, bmaj=6.187 mas, bpa=-4.139 degrees
! Estimated noise=1.14355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.23823 Jy
! Component: 100  -  total flux cleaned = 0.318779 Jy
! Total flux subtracted in 100 components = 0.318779 Jy
! Clean residual min=-0.022956 max=0.038326 Jy/beam
! Clean residual mean=0.000027 rms=0.007989 Jy/beam
! Combined flux in latest and established models = 0.318779 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.318779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.237831Jy  sigma=2.124843
! Fit after  self-cal, rms=0.237669Jy  sigma=2.121348
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.506 mas, bmaj=6.71 mas, bpa=-2.947 degrees
! Estimated noise=0.96557 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0578085 Jy
! Component: 100  -  total flux cleaned = 0.0904629 Jy
! Component: 150  -  total flux cleaned = 0.110751 Jy
! Component: 200  -  total flux cleaned = 0.123659 Jy
! Total flux subtracted in 200 components = 0.123659 Jy
! Clean residual min=-0.017946 max=0.017944 Jy/beam
! Clean residual mean=0.000045 rms=0.005284 Jy/beam
! Combined flux in latest and established models = 0.442438 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.442438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.207321Jy  sigma=1.636157
! Fit after  self-cal, rms=0.207205Jy  sigma=1.632882
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.506 x 6.71 at -2.947 degrees (North through East)
! Clean map  min=-0.016839  max=0.33491 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.05     NL        1.01     OV        1.09     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        1.04     NL        1.03     OV        1.05     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.92     MK        1.00     NL        1.00     OV        1.03     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.84     MK        1.02     NL        0.96     OV        1.08     
!   PT        0.93     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.207205Jy  sigma=1.632882
! Fit after  self-cal, rms=0.166167Jy  sigma=1.564882
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.524 mas, bmaj=6.739 mas, bpa=-2.986 degrees
! Estimated noise=0.976514 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00813704 Jy
! Component: 100  -  total flux cleaned = 0.0123332 Jy
! Component: 150  -  total flux cleaned = 0.0148323 Jy
! Component: 200  -  total flux cleaned = 0.0163357 Jy
! Total flux subtracted in 200 components = 0.0163357 Jy
! Clean residual min=-0.016310 max=0.015675 Jy/beam
! Clean residual mean=0.000014 rms=0.004797 Jy/beam
! Combined flux in latest and established models = 0.458773 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 49 components and 0.458773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163840Jy  sigma=1.576405
! Fit after  self-cal, rms=0.163828Jy  sigma=1.575953
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163828Jy  sigma=1.575953
! Fit after  self-cal, rms=0.163251Jy  sigma=1.535111
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.513 mas, bmaj=6.719 mas, bpa=-3.02 degrees
! Estimated noise=0.997763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00749733 Jy
! Component: 100  -  total flux cleaned = 0.0112651 Jy
! Component: 150  -  total flux cleaned = 0.0135583 Jy
! Component: 200  -  total flux cleaned = 0.0149776 Jy
! Total flux subtracted in 200 components = 0.0149776 Jy
! Clean residual min=-0.014718 max=0.012850 Jy/beam
! Clean residual mean=0.000012 rms=0.003934 Jy/beam
! Combined flux in latest and established models = 0.473751 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.473751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161186Jy  sigma=1.545943
! Fit after  self-cal, rms=0.161190Jy  sigma=1.545798
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108737 Jy
! Component: 100  -  total flux cleaned = 0.00119729 Jy
! Component: 150  -  total flux cleaned = 0.0012709 Jy
! Component: 200  -  total flux cleaned = 0.00136169 Jy
! Total flux subtracted in 200 components = 0.00136169 Jy
! Clean residual min=-0.014699 max=0.013037 Jy/beam
! Clean residual mean=0.000011 rms=0.003940 Jy/beam
! Combined flux in latest and established models = 0.475113 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 54 components and 0.475112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161052Jy  sigma=1.547174
! Fit after  self-cal, rms=0.161058Jy  sigma=1.547145
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161058Jy  sigma=1.547145
! Fit after  self-cal, rms=0.161254Jy  sigma=1.538693
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.504 mas, bmaj=6.705 mas, bpa=-3.001 degrees
! Estimated noise=1.01279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0053158 Jy
! Component: 100  -  total flux cleaned = 0.00804859 Jy
! Component: 150  -  total flux cleaned = 0.00974557 Jy
! Component: 200  -  total flux cleaned = 0.0108038 Jy
! Total flux subtracted in 200 components = 0.0108038 Jy
! Clean residual min=-0.015385 max=0.013150 Jy/beam
! Clean residual mean=0.000013 rms=0.004020 Jy/beam
! Combined flux in latest and established models = 0.485916 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.485916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159888Jy  sigma=1.548250
! Fit after  self-cal, rms=0.159891Jy  sigma=1.548214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000710385 Jy
! Component: 100  -  total flux cleaned = 0.000776727 Jy
! Component: 150  -  total flux cleaned = 0.000859561 Jy
! Component: 200  -  total flux cleaned = 0.000898606 Jy
! Total flux subtracted in 200 components = 0.000898606 Jy
! Clean residual min=-0.015361 max=0.013304 Jy/beam
! Clean residual mean=0.000012 rms=0.004024 Jy/beam
! Combined flux in latest and established models = 0.486815 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 60 components and 0.486815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159803Jy  sigma=1.549092
! Fit after  self-cal, rms=0.159806Jy  sigma=1.549082
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159806Jy  sigma=1.549082
! Fit after  self-cal, rms=0.159979Jy  sigma=1.545092
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.273 mas, bmaj=13.96 mas, bpa=-4.604 degrees
! Estimated noise=1.59348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00907021 Jy
! Component: 100  -  total flux cleaned = 0.0119666 Jy
! Component: 150  -  total flux cleaned = 0.0128979 Jy
! Component: 200  -  total flux cleaned = 0.0129672 Jy
! Total flux subtracted in 200 components = 0.0129672 Jy
! Clean residual min=-0.034648 max=0.023623 Jy/beam
! Clean residual mean=0.000040 rms=0.009688 Jy/beam
! Combined flux in latest and established models = 0.499782 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 64 components and 0.499782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158784Jy  sigma=1.559955
! Fit after  self-cal, rms=0.158779Jy  sigma=1.559391
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000246228 Jy
! Component: 100  -  total flux cleaned = 0.00024858 Jy
! Component: 150  -  total flux cleaned = 0.00029353 Jy
! Component: 200  -  total flux cleaned = 0.000298233 Jy
! Total flux subtracted in 200 components = 0.000298233 Jy
! Clean residual min=-0.034772 max=0.023339 Jy/beam
! Clean residual mean=0.000040 rms=0.009695 Jy/beam
! Combined flux in latest and established models = 0.50008 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 69 components and 0.50008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158780Jy  sigma=1.560829
! Fit after  self-cal, rms=0.158782Jy  sigma=1.560637
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.498 mas, bmaj=6.694 mas, bpa=-2.981 degrees
! Estimated noise=1.0229 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.498 x 6.694 at -2.981 degrees (North through East)
! Clean map  min=-0.015898  max=0.35432 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.153 mas, bmaj=6.17 mas, bpa=-4.084 degrees
! Estimated noise=1.20945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.25183 Jy
! Component: 100  -  total flux cleaned = 0.337969 Jy
! Component: 150  -  total flux cleaned = 0.383583 Jy
! Component: 200  -  total flux cleaned = 0.413668 Jy
! Total flux subtracted in 200 components = 0.413668 Jy
! Clean residual min=-0.018487 max=0.019816 Jy/beam
! Clean residual mean=0.000011 rms=0.005587 Jy/beam
! Combined flux in latest and established models = 0.413669 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.413669 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.498 mas, bmaj=6.694 mas, bpa=-2.981 degrees
! Estimated noise=1.0229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0305682 Jy
! Component: 100  -  total flux cleaned = 0.0493263 Jy
! Component: 150  -  total flux cleaned = 0.0610522 Jy
! Component: 200  -  total flux cleaned = 0.0685275 Jy
! Total flux subtracted in 200 components = 0.0685275 Jy
! Clean residual min=-0.014592 max=0.012800 Jy/beam
! Clean residual mean=0.000022 rms=0.004118 Jy/beam
! Combined flux in latest and established models = 0.482196 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 49 components and 0.482196 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.273 mas, bmaj=13.96 mas, bpa=-4.604 degrees
! Estimated noise=1.59348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115945 Jy
! Component: 100  -  total flux cleaned = 0.0157578 Jy
! Component: 150  -  total flux cleaned = 0.0173548 Jy
! Component: 200  -  total flux cleaned = 0.0176188 Jy
! Total flux subtracted in 200 components = 0.0176188 Jy
! Clean residual min=-0.034589 max=0.023687 Jy/beam
! Clean residual mean=0.000040 rms=0.009685 Jy/beam
! Combined flux in latest and established models = 0.499815 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.72196e-05 Jy
! Component: 100  -  total flux cleaned = 0.000111987 Jy
! Component: 150  -  total flux cleaned = 0.00016432 Jy
! Component: 200  -  total flux cleaned = 0.000213354 Jy
! Total flux subtracted in 200 components = 0.000213354 Jy
! Clean residual min=-0.034528 max=0.023811 Jy/beam
! Clean residual mean=0.000040 rms=0.009679 Jy/beam
! Combined flux in latest and established models = 0.500028 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 54 components and 0.500028 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.498 mas, bmaj=6.694 mas, bpa=-2.981 degrees
! Estimated noise=1.0229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00284861 Jy
! Component: 100  -  total flux cleaned = -0.00332838 Jy
! Component: 150  -  total flux cleaned = -0.00383169 Jy
! Component: 200  -  total flux cleaned = -0.00418337 Jy
! Total flux subtracted in 200 components = -0.00418337 Jy
! Clean residual min=-0.015500 max=0.013525 Jy/beam
! Clean residual mean=0.000013 rms=0.004095 Jy/beam
! Combined flux in latest and established models = 0.495845 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 64 components and 0.495845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158981Jy  sigma=1.554698
! Fit after  self-cal, rms=0.158994Jy  sigma=1.554624
wmodel /J1714-0558_S_map.mod
! wmodel: Unable to open new model file: /J1714-0558_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1714-0558_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.498 x 6.694 at -2.981 degrees (North through East)
! Clean map  min=-0.01508  max=0.35464 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1714-0558_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.354644 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00409623 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.46508 3.46508 6.93016 13.8603 27.7206 55.4413
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0122 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.354 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  86.578 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1714-0558_S_dfm.log closed on Fri May 20 00:15:48 2016