! Started logfile: /scr/pima/bg219a_uvs/J1710-0355_S_dfm.log on Fri May 20 00:15:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1710-0355_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1710-0355_S_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.796296 visibilities/baseline/integration-bin.
! Found source: J1710-0355
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1720 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1710-0355_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027740Jy  sigma=22.028790
! Fit after  self-cal, rms=0.803931Jy  sigma=17.051101
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.178 mas, bmaj=6.427 mas, bpa=-6.061 degrees
! Estimated noise=1.2147 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141406 Jy
! Component: 100  -  total flux cleaned = 0.18923 Jy
! Total flux subtracted in 100 components = 0.18923 Jy
! Clean residual min=-0.015473 max=0.023015 Jy/beam
! Clean residual mean=0.000030 rms=0.005170 Jy/beam
! Combined flux in latest and established models = 0.18923 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.18923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082852Jy  sigma=1.759403
! Fit after  self-cal, rms=0.082745Jy  sigma=1.757089
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.545 mas, bmaj=6.909 mas, bpa=-4.193 degrees
! Estimated noise=0.875982 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.03917 Jy
! Component: 100  -  total flux cleaned = 0.0614625 Jy
! Component: 150  -  total flux cleaned = 0.0753609 Jy
! Component: 200  -  total flux cleaned = 0.0843956 Jy
! Total flux subtracted in 200 components = 0.0843956 Jy
! Clean residual min=-0.007255 max=0.009664 Jy/beam
! Clean residual mean=0.000011 rms=0.002340 Jy/beam
! Combined flux in latest and established models = 0.273625 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 42 components and 0.273625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063279Jy  sigma=1.239770
! Fit after  self-cal, rms=0.063196Jy  sigma=1.236553
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.545 x 6.909 at -4.193 degrees (North through East)
! Clean map  min=-0.0069588  max=0.2018 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.08     NL        1.03     OV        0.94     
!   PT        0.93     SC        1.10     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.03     NL        1.01     OV        0.97     
!   PT        0.94     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.07     OV        0.96     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.063196Jy  sigma=1.236553
! Fit after  self-cal, rms=0.063005Jy  sigma=1.205554
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.581 mas, bmaj=6.982 mas, bpa=-4.204 degrees
! Estimated noise=0.865778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000297971 Jy
! Component: 100  -  total flux cleaned = -0.000410017 Jy
! Component: 150  -  total flux cleaned = -0.000410503 Jy
! Component: 200  -  total flux cleaned = -0.000409747 Jy
! Total flux subtracted in 200 components = -0.000409747 Jy
! Clean residual min=-0.006055 max=0.005990 Jy/beam
! Clean residual mean=0.000001 rms=0.001490 Jy/beam
! Combined flux in latest and established models = 0.273216 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 0.273216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062912Jy  sigma=1.203733
! Fit after  self-cal, rms=0.062973Jy  sigma=1.203526
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062973Jy  sigma=1.203526
! Fit after  self-cal, rms=0.062413Jy  sigma=1.190655
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.581 mas, bmaj=6.977 mas, bpa=-4.228 degrees
! Estimated noise=0.863571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000640788 Jy
! Component: 100  -  total flux cleaned = -0.000641666 Jy
! Component: 150  -  total flux cleaned = -0.000683029 Jy
! Component: 200  -  total flux cleaned = -0.000642565 Jy
! Total flux subtracted in 200 components = -0.000642565 Jy
! Clean residual min=-0.005054 max=0.005277 Jy/beam
! Clean residual mean=0.000002 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.272573 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 0.272573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062341Jy  sigma=1.189592
! Fit after  self-cal, rms=0.062350Jy  sigma=1.189463
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, -17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384344 Jy
! Component: 100  -  total flux cleaned = 0.00427103 Jy
! Component: 150  -  total flux cleaned = 0.00448963 Jy
! Component: 200  -  total flux cleaned = 0.0044289 Jy
! Total flux subtracted in 200 components = 0.0044289 Jy
! Clean residual min=-0.004793 max=0.003978 Jy/beam
! Clean residual mean=-0.000000 rms=0.001015 Jy/beam
! Combined flux in latest and established models = 0.277002 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 0.277002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061945Jy  sigma=1.182484
! Fit after  self-cal, rms=0.061916Jy  sigma=1.182079
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061916Jy  sigma=1.182079
! Fit after  self-cal, rms=0.061588Jy  sigma=1.181300
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.575 mas, bmaj=6.979 mas, bpa=-4.293 degrees
! Estimated noise=0.85914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140865 Jy
! Component: 100  -  total flux cleaned = 0.00141683 Jy
! Component: 150  -  total flux cleaned = 0.00124462 Jy
! Component: 200  -  total flux cleaned = 0.00116888 Jy
! Total flux subtracted in 200 components = 0.00116888 Jy
! Clean residual min=-0.004420 max=0.003550 Jy/beam
! Clean residual mean=-0.000001 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.278171 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.278171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061477Jy  sigma=1.179481
! Fit after  self-cal, rms=0.061469Jy  sigma=1.179354
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000332453 Jy
! Component: 100  -  total flux cleaned = 0.000329903 Jy
! Component: 150  -  total flux cleaned = 0.00032825 Jy
! Component: 200  -  total flux cleaned = 0.000296067 Jy
! Total flux subtracted in 200 components = 0.000296067 Jy
! Clean residual min=-0.004265 max=0.003471 Jy/beam
! Clean residual mean=-0.000001 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.278467 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 84 components and 0.278467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061425Jy  sigma=1.178669
! Fit after  self-cal, rms=0.061421Jy  sigma=1.178636
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061421Jy  sigma=1.178636
! Fit after  self-cal, rms=0.061334Jy  sigma=1.178383
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.43 mas, bmaj=15.01 mas, bpa=-5.664 degrees
! Estimated noise=1.21563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000875306 Jy
! Component: 100  -  total flux cleaned = 0.000944966 Jy
! Component: 150  -  total flux cleaned = 0.000974459 Jy
! Component: 200  -  total flux cleaned = 0.00100143 Jy
! Total flux subtracted in 200 components = 0.00100143 Jy
! Clean residual min=-0.003328 max=0.003942 Jy/beam
! Clean residual mean=-0.000001 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.279468 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 96 components and 0.279468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061352Jy  sigma=1.178312
! Fit after  self-cal, rms=0.061341Jy  sigma=1.178202
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112611 Jy
! Component: 100  -  total flux cleaned = 6.24914e-05 Jy
! Component: 150  -  total flux cleaned = 6.23983e-05 Jy
! Component: 200  -  total flux cleaned = 4.1039e-05 Jy
! Total flux subtracted in 200 components = 4.1039e-05 Jy
! Clean residual min=-0.003235 max=0.003917 Jy/beam
! Clean residual mean=-0.000001 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 0.279509 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 100 components and 0.279509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061363Jy  sigma=1.178436
! Fit after  self-cal, rms=0.061358Jy  sigma=1.178375
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.572 mas, bmaj=6.981 mas, bpa=-4.312 degrees
! Estimated noise=0.857368 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.572 x 6.981 at -4.312 degrees (North through East)
! Clean map  min=-0.0039509  max=0.19831 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.198 mas, bmaj=6.462 mas, bpa=-6.186 degrees
! Estimated noise=1.19279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1386 Jy
! Component: 100  -  total flux cleaned = 0.184941 Jy
! Component: 150  -  total flux cleaned = 0.21035 Jy
! Component: 200  -  total flux cleaned = 0.226736 Jy
! Total flux subtracted in 200 components = 0.226736 Jy
! Clean residual min=-0.011290 max=0.010732 Jy/beam
! Clean residual mean=0.000014 rms=0.002790 Jy/beam
! Combined flux in latest and established models = 0.226736 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.226736 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.572 mas, bmaj=6.981 mas, bpa=-4.312 degrees
! Estimated noise=0.857368 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181263 Jy
! Component: 100  -  total flux cleaned = 0.0291692 Jy
! Component: 150  -  total flux cleaned = 0.0367226 Jy
! Component: 200  -  total flux cleaned = 0.0419439 Jy
! Total flux subtracted in 200 components = 0.0419439 Jy
! Clean residual min=-0.005522 max=0.005321 Jy/beam
! Clean residual mean=0.000004 rms=0.001289 Jy/beam
! Combined flux in latest and established models = 0.26868 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.26868 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.43 mas, bmaj=15.01 mas, bpa=-5.664 degrees
! Estimated noise=1.21563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00639912 Jy
! Component: 100  -  total flux cleaned = 0.00891171 Jy
! Component: 150  -  total flux cleaned = 0.00954336 Jy
! Component: 200  -  total flux cleaned = 0.0097515 Jy
! Total flux subtracted in 200 components = 0.0097515 Jy
! Clean residual min=-0.002841 max=0.003892 Jy/beam
! Clean residual mean=0.000001 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 0.278432 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109124 Jy
! Component: 100  -  total flux cleaned = 0.000143163 Jy
! Component: 150  -  total flux cleaned = 0.000205281 Jy
! Component: 200  -  total flux cleaned = 0.000234204 Jy
! Total flux subtracted in 200 components = 0.000234204 Jy
! Clean residual min=-0.002597 max=0.003795 Jy/beam
! Clean residual mean=0.000000 rms=0.000998 Jy/beam
! Combined flux in latest and established models = 0.278666 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 56 components and 0.278666 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.572 mas, bmaj=6.981 mas, bpa=-4.312 degrees
! Estimated noise=0.857368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128534 Jy
! Component: 100  -  total flux cleaned = -0.00138506 Jy
! Component: 150  -  total flux cleaned = -0.00126297 Jy
! Component: 200  -  total flux cleaned = -0.00110396 Jy
! Total flux subtracted in 200 components = -0.00110396 Jy
! Clean residual min=-0.004280 max=0.003690 Jy/beam
! Clean residual mean=-0.000000 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.277562 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 71 components and 0.277562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061384Jy  sigma=1.179078
! Fit after  self-cal, rms=0.061371Jy  sigma=1.178851
wmodel /J1710-0355_S_map.mod
! wmodel: Unable to open new model file: /J1710-0355_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1710-0355_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.572 x 6.981 at -4.312 degrees (North through East)
! Clean map  min=-0.0040494  max=0.19902 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1710-0355_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.199022 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000948449 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.42966 1.42966 2.85933 5.71865 11.4373 22.8746 45.7492 91.4984
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0028 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.199 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  209.839 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1710-0355_S_dfm.log closed on Fri May 20 00:15:41 2016