! Started logfile: /scr/pima/bg219a_uvs/J1701-1903_X_dfm.log on Fri May 20 00:15:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1701-1903_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1701-1903_X_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1701-1903
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 9360 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1701-1903_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019258Jy  sigma=26.603787
! Fit after  self-cal, rms=0.847144Jy  sigma=22.058485
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5722 mas, bmaj=1.518 mas, bpa=1.163 degrees
! Estimated noise=0.552607 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116914 Jy
! Component: 100  -  total flux cleaned = 0.143619 Jy
! Total flux subtracted in 100 components = 0.143619 Jy
! Clean residual min=-0.005480 max=0.009948 Jy/beam
! Clean residual mean=-0.000002 rms=0.001532 Jy/beam
! Combined flux in latest and established models = 0.143619 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.143619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056487Jy  sigma=1.439845
! Fit after  self-cal, rms=0.056480Jy  sigma=1.439284
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102842 Jy
! Component: 100  -  total flux cleaned = 0.0149116 Jy
! Total flux subtracted in 100 components = 0.0149116 Jy
! Clean residual min=-0.003998 max=0.004047 Jy/beam
! Clean residual mean=-0.000001 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.158531 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 7 components and 0.158531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054404Jy  sigma=1.377307
! Fit after  self-cal, rms=0.054405Jy  sigma=1.377029
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6923 mas, bmaj=1.762 mas, bpa=0.428 degrees
! Estimated noise=0.294451 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00434219 Jy
! Component: 100  -  total flux cleaned = 0.0062553 Jy
! Component: 150  -  total flux cleaned = 0.00723567 Jy
! Component: 200  -  total flux cleaned = 0.00776006 Jy
! Total flux subtracted in 200 components = 0.00776006 Jy
! Clean residual min=-0.002670 max=0.002123 Jy/beam
! Clean residual mean=0.000000 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.166291 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 21 components and 0.166291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054116Jy  sigma=1.368157
! Fit after  self-cal, rms=0.054129Jy  sigma=1.368108
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6923 x 1.762 at 0.428 degrees (North through East)
! Clean map  min=-0.0023304  max=0.15393 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.00     OV        1.03     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        0.99     OV        1.02     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.01     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.96     NL        1.01     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.98     NL        0.98     OV        1.01     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        1.03     OV        1.01     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.00     NL        0.99     OV        0.99     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        1.00     OV        1.00     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.95     MK        1.03     NL        1.02     OV        1.02     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.00     NL        1.01     OV        1.03     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        1.02     OV        1.02     
!   PT        1.01     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.054129Jy  sigma=1.368108
! Fit after  self-cal, rms=0.053958Jy  sigma=1.363741
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6926 mas, bmaj=1.762 mas, bpa=0.4867 degrees
! Estimated noise=0.294056 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.44475e-06 Jy
! Component: 100  -  total flux cleaned = 3.52372e-05 Jy
! Component: 150  -  total flux cleaned = 3.59518e-05 Jy
! Component: 200  -  total flux cleaned = 3.5966e-05 Jy
! Total flux subtracted in 200 components = 3.5966e-05 Jy
! Clean residual min=-0.002072 max=0.001929 Jy/beam
! Clean residual mean=0.000002 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.166327 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 27 components and 0.166327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053954Jy  sigma=1.363678
! Fit after  self-cal, rms=0.053955Jy  sigma=1.363630
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053955Jy  sigma=1.363630
! Fit after  self-cal, rms=0.054014Jy  sigma=1.359185
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6921 mas, bmaj=1.767 mas, bpa=0.4612 degrees
! Estimated noise=0.294259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000139131 Jy
! Component: 100  -  total flux cleaned = -0.000185228 Jy
! Component: 150  -  total flux cleaned = -0.000194633 Jy
! Component: 200  -  total flux cleaned = -0.000186725 Jy
! Total flux subtracted in 200 components = -0.000186725 Jy
! Clean residual min=-0.002031 max=0.001638 Jy/beam
! Clean residual mean=0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.16614 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.16614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054009Jy  sigma=1.359078
! Fit after  self-cal, rms=0.054016Jy  sigma=1.359027
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.20859e-05 Jy
! Component: 100  -  total flux cleaned = 1.70526e-05 Jy
! Component: 150  -  total flux cleaned = 1.01786e-05 Jy
! Component: 200  -  total flux cleaned = 1.01159e-05 Jy
! Total flux subtracted in 200 components = 1.01159e-05 Jy
! Clean residual min=-0.002008 max=0.001647 Jy/beam
! Clean residual mean=0.000000 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.16615 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.16615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054014Jy  sigma=1.358981
! Fit after  self-cal, rms=0.054014Jy  sigma=1.358968
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054014Jy  sigma=1.358968
! Fit after  self-cal, rms=0.054080Jy  sigma=1.358911
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6924 mas, bmaj=1.768 mas, bpa=0.4769 degrees
! Estimated noise=0.29438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106829 Jy
! Component: 100  -  total flux cleaned = -0.000138892 Jy
! Component: 150  -  total flux cleaned = -0.000138871 Jy
! Component: 200  -  total flux cleaned = -0.000144138 Jy
! Total flux subtracted in 200 components = -0.000144138 Jy
! Clean residual min=-0.001984 max=0.001627 Jy/beam
! Clean residual mean=0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.166006 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 37 components and 0.166006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054078Jy  sigma=1.358861
! Fit after  self-cal, rms=0.054079Jy  sigma=1.358851
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.26711e-05 Jy
! Component: 100  -  total flux cleaned = 2.18989e-05 Jy
! Component: 150  -  total flux cleaned = 1.70681e-05 Jy
! Component: 200  -  total flux cleaned = 1.27612e-05 Jy
! Total flux subtracted in 200 components = 1.27612e-05 Jy
! Clean residual min=-0.001965 max=0.001627 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.166019 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 38 components and 0.166019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054078Jy  sigma=1.358825
! Fit after  self-cal, rms=0.054078Jy  sigma=1.358817
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054078Jy  sigma=1.358817
! Fit after  self-cal, rms=0.054108Jy  sigma=1.358807
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.051 mas, bmaj=5.619 mas, bpa=0.1176 degrees
! Estimated noise=0.420147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000324639 Jy
! Component: 100  -  total flux cleaned = -0.000325029 Jy
! Component: 150  -  total flux cleaned = -0.000325524 Jy
! Component: 200  -  total flux cleaned = -0.000325968 Jy
! Total flux subtracted in 200 components = -0.000325968 Jy
! Clean residual min=-0.002590 max=0.002452 Jy/beam
! Clean residual mean=0.000000 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.165693 Jy
selfcal
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 39 components and 0.165693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054109Jy  sigma=1.358871
! Fit after  self-cal, rms=0.054109Jy  sigma=1.358818
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.54707e-05 Jy
! Component: 100  -  total flux cleaned = -3.62817e-05 Jy
! Component: 150  -  total flux cleaned = -3.68285e-05 Jy
! Component: 200  -  total flux cleaned = -3.72353e-05 Jy
! Total flux subtracted in 200 components = -3.72353e-05 Jy
! Clean residual min=-0.002583 max=0.002445 Jy/beam
! Clean residual mean=-0.000000 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.165656 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 39 components and 0.165656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054113Jy  sigma=1.358948
! Fit after  self-cal, rms=0.054112Jy  sigma=1.358914
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6926 mas, bmaj=1.769 mas, bpa=0.4967 degrees
! Estimated noise=0.294457 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6926 x 1.769 at 0.4967 degrees (North through East)
! Clean map  min=-0.0017032  max=0.15397 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5721 mas, bmaj=1.522 mas, bpa=1.214 degrees
! Estimated noise=0.55514 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117412 Jy
! Component: 100  -  total flux cleaned = 0.144159 Jy
! Component: 150  -  total flux cleaned = 0.154458 Jy
! Component: 200  -  total flux cleaned = 0.159096 Jy
! Total flux subtracted in 200 components = 0.159096 Jy
! Clean residual min=-0.003892 max=0.003736 Jy/beam
! Clean residual mean=-0.000000 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.159096 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.159096 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6926 mas, bmaj=1.769 mas, bpa=0.4967 degrees
! Estimated noise=0.294457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0039301 Jy
! Component: 100  -  total flux cleaned = 0.00547201 Jy
! Component: 150  -  total flux cleaned = 0.00625815 Jy
! Component: 200  -  total flux cleaned = 0.00660939 Jy
! Total flux subtracted in 200 components = 0.00660939 Jy
! Clean residual min=-0.002057 max=0.001615 Jy/beam
! Clean residual mean=-0.000000 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.165705 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 29 components and 0.165705 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.051 mas, bmaj=5.619 mas, bpa=0.1176 degrees
! Estimated noise=0.420147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.99037e-05 Jy
! Component: 100  -  total flux cleaned = 3.14247e-05 Jy
! Component: 150  -  total flux cleaned = 3.22982e-05 Jy
! Component: 200  -  total flux cleaned = 3.29295e-05 Jy
! Total flux subtracted in 200 components = 3.29295e-05 Jy
! Clean residual min=-0.002577 max=0.002478 Jy/beam
! Clean residual mean=0.000000 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.165738 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.49989e-07 Jy
! Component: 100  -  total flux cleaned = 1.97122e-06 Jy
! Component: 150  -  total flux cleaned = 3.78512e-06 Jy
! Component: 200  -  total flux cleaned = 9.3588e-06 Jy
! Total flux subtracted in 200 components = 9.3588e-06 Jy
! Clean residual min=-0.002563 max=0.002471 Jy/beam
! Clean residual mean=0.000000 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.165747 Jy
! Adding 7 model components to the UV plane model.
! The established model now contains 31 components and 0.165747 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6926 mas, bmaj=1.769 mas, bpa=0.4967 degrees
! Estimated noise=0.294457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000368713 Jy
! Component: 100  -  total flux cleaned = 0.000347799 Jy
! Component: 150  -  total flux cleaned = 0.000318916 Jy
! Component: 200  -  total flux cleaned = 0.000287906 Jy
! Total flux subtracted in 200 components = 0.000287906 Jy
! Clean residual min=-0.001898 max=0.001632 Jy/beam
! Clean residual mean=0.000000 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.166035 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 37 components and 0.166035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054107Jy  sigma=1.358755
! Fit after  self-cal, rms=0.054105Jy  sigma=1.358731
wmodel /J1701-1903_X_map.mod
! wmodel: Unable to open new model file: /J1701-1903_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1701-1903_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6926 x 1.769 at 0.4967 degrees (North through East)
! Clean map  min=-0.0016728  max=0.15373 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1701-1903_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.153733 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000415909 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.811622 0.811622 1.62324 3.24649 6.49297 12.9859 25.9719 51.9438
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.153 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  369.63 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1701-1903_X_dfm.log closed on Fri May 20 00:15:22 2016