! Started logfile: /scr/pima/bg219a_uvs/J1701-1903_S_dfm.log on Fri May 20 00:15:15 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1701-1903_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1701-1903_S_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1701-1903
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1701-1903_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006995Jy  sigma=21.114204
! Fit after  self-cal, rms=0.908176Jy  sigma=19.076627
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.22 mas, bmaj=5.771 mas, bpa=-0.1038 degrees
! Estimated noise=0.908879 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0715327 Jy
! Component: 100  -  total flux cleaned = 0.0875146 Jy
! Total flux subtracted in 100 components = 0.0875146 Jy
! Clean residual min=-0.006064 max=0.008077 Jy/beam
! Clean residual mean=-0.000012 rms=0.001719 Jy/beam
! Combined flux in latest and established models = 0.0875146 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0875146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064360Jy  sigma=1.252567
! Fit after  self-cal, rms=0.064326Jy  sigma=1.252003
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.627 mas, bmaj=6.811 mas, bpa=-1.528 degrees
! Estimated noise=0.639742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744461 Jy
! Component: 100  -  total flux cleaned = 0.0103743 Jy
! Component: 150  -  total flux cleaned = 0.011117 Jy
! Component: 200  -  total flux cleaned = 0.0112303 Jy
! Total flux subtracted in 200 components = 0.0112303 Jy
! Clean residual min=-0.005027 max=0.008155 Jy/beam
! Clean residual mean=0.000007 rms=0.001614 Jy/beam
! Combined flux in latest and established models = 0.0987449 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.0987449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063557Jy  sigma=1.235838
! Fit after  self-cal, rms=0.063523Jy  sigma=1.235333
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.627 x 6.811 at -1.528 degrees (North through East)
! Clean map  min=-0.0049106  max=0.093063 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.90     MK        1.05     NL        1.12     OV        1.03     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.99     NL        1.12     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.99     NL        1.09     OV        1.00     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        1.10     OV        0.97     
!   PT        0.96     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.063523Jy  sigma=1.235333
! Fit after  self-cal, rms=0.064160Jy  sigma=1.227440
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.629 mas, bmaj=6.815 mas, bpa=-1.241 degrees
! Estimated noise=0.63863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667907 Jy
! Component: 100  -  total flux cleaned = 0.00951186 Jy
! Component: 150  -  total flux cleaned = 0.0102739 Jy
! Component: 200  -  total flux cleaned = 0.0104947 Jy
! Total flux subtracted in 200 components = 0.0104947 Jy
! Clean residual min=-0.004018 max=0.003877 Jy/beam
! Clean residual mean=0.000009 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.10924 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.10924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063466Jy  sigma=1.213617
! Fit after  self-cal, rms=0.063489Jy  sigma=1.211679
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063489Jy  sigma=1.211679
! Fit after  self-cal, rms=0.062787Jy  sigma=1.203467
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.621 mas, bmaj=6.823 mas, bpa=-1.367 degrees
! Estimated noise=0.634219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162564 Jy
! Component: 100  -  total flux cleaned = 0.00189456 Jy
! Component: 150  -  total flux cleaned = 0.00189808 Jy
! Component: 200  -  total flux cleaned = 0.00183983 Jy
! Total flux subtracted in 200 components = 0.00183983 Jy
! Clean residual min=-0.003001 max=0.003049 Jy/beam
! Clean residual mean=-0.000002 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.111079 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 49 components and 0.111079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062714Jy  sigma=1.202112
! Fit after  self-cal, rms=0.062750Jy  sigma=1.201790
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000580292 Jy
! Component: 100  -  total flux cleaned = 0.000498142 Jy
! Component: 150  -  total flux cleaned = 0.000472151 Jy
! Component: 200  -  total flux cleaned = 0.000425353 Jy
! Total flux subtracted in 200 components = 0.000425353 Jy
! Clean residual min=-0.002923 max=0.002976 Jy/beam
! Clean residual mean=-0.000002 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.111505 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.111505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062725Jy  sigma=1.201362
! Fit after  self-cal, rms=0.062722Jy  sigma=1.201333
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062722Jy  sigma=1.201333
! Fit after  self-cal, rms=0.062692Jy  sigma=1.201023
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.618 mas, bmaj=6.83 mas, bpa=-1.397 degrees
! Estimated noise=0.633768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000677801 Jy
! Component: 100  -  total flux cleaned = 0.000680743 Jy
! Component: 150  -  total flux cleaned = 0.000638323 Jy
! Component: 200  -  total flux cleaned = 0.000638246 Jy
! Total flux subtracted in 200 components = 0.000638246 Jy
! Clean residual min=-0.002979 max=0.002814 Jy/beam
! Clean residual mean=-0.000002 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.112143 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 66 components and 0.112143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062670Jy  sigma=1.200647
! Fit after  self-cal, rms=0.062669Jy  sigma=1.200599
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271952 Jy
! Component: 100  -  total flux cleaned = 0.000197703 Jy
! Component: 150  -  total flux cleaned = 0.000198429 Jy
! Component: 200  -  total flux cleaned = 0.000166024 Jy
! Total flux subtracted in 200 components = 0.000166024 Jy
! Clean residual min=-0.002945 max=0.002792 Jy/beam
! Clean residual mean=-0.000002 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.112309 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 73 components and 0.112309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062658Jy  sigma=1.200405
! Fit after  self-cal, rms=0.062656Jy  sigma=1.200392
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062656Jy  sigma=1.200392
! Fit after  self-cal, rms=0.062702Jy  sigma=1.200321
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.255 mas, bmaj=18.63 mas, bpa=-0.4973 degrees
! Estimated noise=0.880998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000534309 Jy
! Component: 100  -  total flux cleaned = 0.000590911 Jy
! Component: 150  -  total flux cleaned = 0.000545076 Jy
! Component: 200  -  total flux cleaned = 0.000517653 Jy
! Total flux subtracted in 200 components = 0.000517653 Jy
! Clean residual min=-0.003240 max=0.003812 Jy/beam
! Clean residual mean=-0.000004 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.112827 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 78 components and 0.112827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062701Jy  sigma=1.200266
! Fit after  self-cal, rms=0.062695Jy  sigma=1.200226
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.39793e-05 Jy
! Component: 100  -  total flux cleaned = 4.11187e-06 Jy
! Component: 150  -  total flux cleaned = -4.19112e-05 Jy
! Component: 200  -  total flux cleaned = -6.15183e-05 Jy
! Total flux subtracted in 200 components = -6.15183e-05 Jy
! Clean residual min=-0.003252 max=0.003779 Jy/beam
! Clean residual mean=-0.000004 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.112765 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 79 components and 0.112765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062698Jy  sigma=1.200275
! Fit after  self-cal, rms=0.062695Jy  sigma=1.200262
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.617 mas, bmaj=6.834 mas, bpa=-1.423 degrees
! Estimated noise=0.634197 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.617 x 6.834 at -1.423 degrees (North through East)
! Clean map  min=-0.0028704  max=0.092797 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.217 mas, bmaj=5.805 mas, bpa=0.1602 degrees
! Estimated noise=0.90217 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0707207 Jy
! Component: 100  -  total flux cleaned = 0.0872616 Jy
! Component: 150  -  total flux cleaned = 0.095639 Jy
! Component: 200  -  total flux cleaned = 0.101093 Jy
! Total flux subtracted in 200 components = 0.101093 Jy
! Clean residual min=-0.005042 max=0.004473 Jy/beam
! Clean residual mean=-0.000010 rms=0.001225 Jy/beam
! Combined flux in latest and established models = 0.101093 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.101093 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.617 mas, bmaj=6.834 mas, bpa=-1.423 degrees
! Estimated noise=0.634197 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478791 Jy
! Component: 100  -  total flux cleaned = 0.00765312 Jy
! Component: 150  -  total flux cleaned = 0.00953507 Jy
! Component: 200  -  total flux cleaned = 0.010083 Jy
! Total flux subtracted in 200 components = 0.010083 Jy
! Clean residual min=-0.003224 max=0.002819 Jy/beam
! Clean residual mean=-0.000003 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.111176 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.111176 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.255 mas, bmaj=18.63 mas, bpa=-0.4973 degrees
! Estimated noise=0.880998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133859 Jy
! Component: 100  -  total flux cleaned = 0.00172574 Jy
! Component: 150  -  total flux cleaned = 0.00179859 Jy
! Component: 200  -  total flux cleaned = 0.00188157 Jy
! Total flux subtracted in 200 components = 0.00188157 Jy
! Clean residual min=-0.003363 max=0.003860 Jy/beam
! Clean residual mean=-0.000004 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.113058 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.63304e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145801 Jy
! Component: 150  -  total flux cleaned = 0.000185462 Jy
! Component: 200  -  total flux cleaned = 0.000209746 Jy
! Total flux subtracted in 200 components = 0.000209746 Jy
! Clean residual min=-0.003266 max=0.003865 Jy/beam
! Clean residual mean=-0.000004 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.113267 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 64 components and 0.113267 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.617 mas, bmaj=6.834 mas, bpa=-1.423 degrees
! Estimated noise=0.634197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.28087e-05 Jy
! Component: 100  -  total flux cleaned = -0.000120168 Jy
! Component: 150  -  total flux cleaned = -8.67574e-05 Jy
! Component: 200  -  total flux cleaned = -8.65301e-05 Jy
! Total flux subtracted in 200 components = -8.65301e-05 Jy
! Clean residual min=-0.003028 max=0.002852 Jy/beam
! Clean residual mean=-0.000002 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.113181 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 67 components and 0.113181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062703Jy  sigma=1.200444
! Fit after  self-cal, rms=0.062714Jy  sigma=1.200327
wmodel /J1701-1903_S_map.mod
! wmodel: Unable to open new model file: /J1701-1903_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1701-1903_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.617 x 6.834 at -1.423 degrees (North through East)
! Clean map  min=-0.0028878  max=0.092545 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1701-1903_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0925448 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000748527 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.42648 2.42648 4.85296 9.70593 19.4119 38.8237 77.6474
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  123.635 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1701-1903_S_dfm.log closed on Fri May 20 00:15:18 2016