! Started logfile: /scr/pima/bg219a_uvs/J1700-2610_X_dfm.log on Fri May 20 00:15:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1700-2610_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1700-2610_X_uva.fits
! AN table 1: 38 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1700-2610
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 5700 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1700-2610_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.792485Jy  sigma=24.997278
! Fit after  self-cal, rms=0.615617Jy  sigma=8.326256
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.513 mas, bmaj=1.436 mas, bpa=3.039 degrees
! Estimated noise=1.24016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.04845 Jy
! Component: 100  -  total flux cleaned = 1.29024 Jy
! Total flux subtracted in 100 components = 1.29024 Jy
! Clean residual min=-0.067914 max=0.118561 Jy/beam
! Clean residual mean=-0.000108 rms=0.015830 Jy/beam
! Combined flux in latest and established models = 1.29024 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.29024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.461891Jy  sigma=5.989316
! Fit after  self-cal, rms=0.461803Jy  sigma=5.988614
! Inverting map 
! Added new window around map position (-1, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120654 Jy
! Component: 100  -  total flux cleaned = 0.193659 Jy
! Total flux subtracted in 100 components = 0.193659 Jy
! Clean residual min=-0.054186 max=0.078299 Jy/beam
! Clean residual mean=-0.000056 rms=0.011456 Jy/beam
! Combined flux in latest and established models = 1.4839 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 1.4839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.413494Jy  sigma=5.283493
! Fit after  self-cal, rms=0.412273Jy  sigma=5.264105
! Inverting map 
! Added new window around map position (-0.2, -3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0745859 Jy
! Component: 100  -  total flux cleaned = 0.118455 Jy
! Total flux subtracted in 100 components = 0.118455 Jy
! Clean residual min=-0.045354 max=0.054481 Jy/beam
! Clean residual mean=-0.000024 rms=0.009332 Jy/beam
! Combined flux in latest and established models = 1.60236 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 20 components and 1.60236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.392689Jy  sigma=4.994439
! Fit after  self-cal, rms=0.391724Jy  sigma=4.974890
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6683 mas, bmaj=1.587 mas, bpa=6.512 degrees
! Estimated noise=0.765265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.6, 22.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0658175 Jy
! Component: 100  -  total flux cleaned = 0.102273 Jy
! Component: 150  -  total flux cleaned = 0.114785 Jy
! Component: 200  -  total flux cleaned = 0.115673 Jy
! Total flux subtracted in 200 components = 0.115673 Jy
! Clean residual min=-0.030201 max=0.033132 Jy/beam
! Clean residual mean=0.000029 rms=0.005647 Jy/beam
! Combined flux in latest and established models = 1.71803 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 45 components and 1.71803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.379295Jy  sigma=4.804803
! Fit after  self-cal, rms=0.378932Jy  sigma=4.798701
! Inverting map 
! Added new window around map position (1.8, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118429 Jy
! Component: 100  -  total flux cleaned = 0.0144968 Jy
! Component: 150  -  total flux cleaned = 0.0152455 Jy
! Component: 200  -  total flux cleaned = 0.0159168 Jy
! Total flux subtracted in 200 components = 0.0159168 Jy
! Clean residual min=-0.023694 max=0.024006 Jy/beam
! Clean residual mean=0.000039 rms=0.004654 Jy/beam
! Combined flux in latest and established models = 1.73395 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 70 components and 1.73395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.374755Jy  sigma=4.752069
! Fit after  self-cal, rms=0.374601Jy  sigma=4.748199
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6683 x 1.587 at 6.512 degrees (North through East)
! Clean map  min=-0.020705  max=1.3285 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        0.98     NL        1.00     OV        1.02     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        0.99     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.00     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.03     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        1.01     OV        0.96     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.04     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        1.02     OV        0.96     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        1.04     NL        1.02     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.03     NL        1.01     OV        0.96     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.04     NL        1.00     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.03     NL        1.03     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.374601Jy  sigma=4.748199
! Fit after  self-cal, rms=0.375186Jy  sigma=4.713764
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6726 mas, bmaj=1.595 mas, bpa=6.785 degrees
! Estimated noise=0.76559 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0128584 Jy
! Component: 100  -  total flux cleaned = -0.0152559 Jy
! Component: 150  -  total flux cleaned = -0.0146941 Jy
! Component: 200  -  total flux cleaned = -0.0146844 Jy
! Total flux subtracted in 200 components = -0.0146844 Jy
! Clean residual min=-0.020166 max=0.019933 Jy/beam
! Clean residual mean=0.000010 rms=0.003604 Jy/beam
! Combined flux in latest and established models = 1.71926 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 78 components and 1.71926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.373279Jy  sigma=4.693223
! Fit after  self-cal, rms=0.373249Jy  sigma=4.692288
! Inverting map 
! Added new window around map position (2.4, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150491 Jy
! Component: 100  -  total flux cleaned = 0.0170525 Jy
! Component: 150  -  total flux cleaned = 0.0179106 Jy
! Component: 200  -  total flux cleaned = 0.0187076 Jy
! Total flux subtracted in 200 components = 0.0187076 Jy
! Clean residual min=-0.015792 max=0.012960 Jy/beam
! Clean residual mean=0.000015 rms=0.003103 Jy/beam
! Combined flux in latest and established models = 1.73797 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 1.73797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.371797Jy  sigma=4.676541
! Fit after  self-cal, rms=0.371730Jy  sigma=4.675532
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.371730Jy  sigma=4.675532
! Fit after  self-cal, rms=0.373144Jy  sigma=4.660642
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6743 mas, bmaj=1.597 mas, bpa=6.823 degrees
! Estimated noise=0.765035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00244462 Jy
! Component: 100  -  total flux cleaned = -0.00612535 Jy
! Component: 150  -  total flux cleaned = -0.00794084 Jy
! Component: 200  -  total flux cleaned = -0.00823347 Jy
! Total flux subtracted in 200 components = -0.00823347 Jy
! Clean residual min=-0.013045 max=0.011347 Jy/beam
! Clean residual mean=0.000022 rms=0.002684 Jy/beam
! Combined flux in latest and established models = 1.72974 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 99 components and 1.72974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.372571Jy  sigma=4.653970
! Fit after  self-cal, rms=0.372553Jy  sigma=4.653675
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00229166 Jy
! Component: 100  -  total flux cleaned = -0.00282138 Jy
! Component: 150  -  total flux cleaned = -0.00257606 Jy
! Component: 200  -  total flux cleaned = -0.00281405 Jy
! Total flux subtracted in 200 components = -0.00281405 Jy
! Clean residual min=-0.011746 max=0.010797 Jy/beam
! Clean residual mean=0.000019 rms=0.002567 Jy/beam
! Combined flux in latest and established models = 1.72692 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 108 components and 1.72692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.372227Jy  sigma=4.649708
! Fit after  self-cal, rms=0.372217Jy  sigma=4.649594
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.372217Jy  sigma=4.649594
! Fit after  self-cal, rms=0.380401Jy  sigma=4.625687
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6748 mas, bmaj=1.597 mas, bpa=6.825 degrees
! Estimated noise=0.765027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000996692 Jy
! Component: 100  -  total flux cleaned = -0.00206701 Jy
! Component: 150  -  total flux cleaned = -0.00284947 Jy
! Component: 200  -  total flux cleaned = -0.00339507 Jy
! Total flux subtracted in 200 components = -0.00339507 Jy
! Clean residual min=-0.009182 max=0.009085 Jy/beam
! Clean residual mean=0.000017 rms=0.002082 Jy/beam
! Combined flux in latest and established models = 1.72353 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 123 components and 1.72353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.380125Jy  sigma=4.623809
! Fit after  self-cal, rms=0.380113Jy  sigma=4.623709
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000389045 Jy
! Component: 100  -  total flux cleaned = -0.00104602 Jy
! Component: 150  -  total flux cleaned = -0.0016573 Jy
! Component: 200  -  total flux cleaned = -0.00180992 Jy
! Total flux subtracted in 200 components = -0.00180992 Jy
! Clean residual min=-0.008848 max=0.008636 Jy/beam
! Clean residual mean=0.000016 rms=0.002037 Jy/beam
! Combined flux in latest and established models = 1.72172 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 131 components and 1.72172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.379956Jy  sigma=4.622641
! Fit after  self-cal, rms=0.379954Jy  sigma=4.622601
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.379954Jy  sigma=4.622601
! Fit after  self-cal, rms=0.379854Jy  sigma=4.622199
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.944 mas, bmaj=5.643 mas, bpa=9.233 degrees
! Estimated noise=1.18957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00399006 Jy
! Component: 100  -  total flux cleaned = -0.00508999 Jy
! Component: 150  -  total flux cleaned = -0.00569824 Jy
! Component: 200  -  total flux cleaned = -0.00611101 Jy
! Total flux subtracted in 200 components = -0.00611101 Jy
! Clean residual min=-0.009922 max=0.009915 Jy/beam
! Clean residual mean=0.000035 rms=0.002954 Jy/beam
! Combined flux in latest and established models = 1.71561 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 145 components and 1.71561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.379826Jy  sigma=4.622147
! Fit after  self-cal, rms=0.379821Jy  sigma=4.622104
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00042899 Jy
! Component: 100  -  total flux cleaned = -0.000478807 Jy
! Component: 150  -  total flux cleaned = -0.000727274 Jy
! Component: 200  -  total flux cleaned = -0.000994414 Jy
! Total flux subtracted in 200 components = -0.000994414 Jy
! Clean residual min=-0.009861 max=0.009640 Jy/beam
! Clean residual mean=0.000034 rms=0.002929 Jy/beam
! Combined flux in latest and established models = 1.71461 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 153 components and 1.71461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.379812Jy  sigma=4.622063
! Fit after  self-cal, rms=0.379811Jy  sigma=4.622038
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6748 mas, bmaj=1.597 mas, bpa=6.849 degrees
! Estimated noise=0.763833 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6748 x 1.597 at 6.849 degrees (North through East)
! Clean map  min=-0.024709  max=1.3323 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.379811Jy  sigma=4.622038
! Fit after  self-cal, rms=0.365211Jy  sigma=4.386232
! Inverting map and beam 
! Estimated beam: bmin=0.676 mas, bmaj=1.599 mas, bpa=7.069 degrees
! Estimated noise=0.733064 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0485047 Jy
! Component: 100  -  total flux cleaned = -0.0652285 Jy
! Component: 150  -  total flux cleaned = -0.070292 Jy
! Component: 200  -  total flux cleaned = -0.0712722 Jy
! Total flux subtracted in 200 components = -0.0712722 Jy
! Clean residual min=-0.014603 max=0.013578 Jy/beam
! Clean residual mean=0.000009 rms=0.003182 Jy/beam
! Combined flux in latest and established models = 1.64334 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 170 components and 1.64334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.358764Jy  sigma=4.302226
! Fit after  self-cal, rms=0.358712Jy  sigma=4.301312
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00307449 Jy
! Component: 100  -  total flux cleaned = -0.0030896 Jy
! Component: 150  -  total flux cleaned = -0.00309652 Jy
! Component: 200  -  total flux cleaned = -0.00286282 Jy
! Total flux subtracted in 200 components = -0.00286282 Jy
! Clean residual min=-0.012593 max=0.011920 Jy/beam
! Clean residual mean=0.000009 rms=0.002963 Jy/beam
! Combined flux in latest and established models = 1.64048 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 186 components and 1.64048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.358231Jy  sigma=4.296730
! Fit after  self-cal, rms=0.358209Jy  sigma=4.296341
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.358209Jy  sigma=4.296341
! Fit after  self-cal, rms=0.354733Jy  sigma=4.228685
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5185 mas, bmaj=1.437 mas, bpa=3.486 degrees
! Estimated noise=1.1674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.985938 Jy
! Component: 100  -  total flux cleaned = 1.21192 Jy
! Component: 150  -  total flux cleaned = 1.31614 Jy
! Component: 200  -  total flux cleaned = 1.38614 Jy
! Total flux subtracted in 200 components = 1.38614 Jy
! Clean residual min=-0.043983 max=0.049709 Jy/beam
! Clean residual mean=-0.000057 rms=0.008532 Jy/beam
! Combined flux in latest and established models = 1.38614 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.38614 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6762 mas, bmaj=1.6 mas, bpa=7.167 degrees
! Estimated noise=0.712065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0831856 Jy
! Component: 100  -  total flux cleaned = 0.132336 Jy
! Component: 150  -  total flux cleaned = 0.167237 Jy
! Component: 200  -  total flux cleaned = 0.184717 Jy
! Total flux subtracted in 200 components = 0.184717 Jy
! Clean residual min=-0.026057 max=0.028027 Jy/beam
! Clean residual mean=-0.000035 rms=0.005086 Jy/beam
! Combined flux in latest and established models = 1.57086 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 42 components and 1.57086 Jy
! Inverting map 
! Added new window around map position (1.2, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193942 Jy
! Component: 100  -  total flux cleaned = 0.0217896 Jy
! Component: 150  -  total flux cleaned = 0.024523 Jy
! Component: 200  -  total flux cleaned = 0.0257161 Jy
! Total flux subtracted in 200 components = 0.0257161 Jy
! Clean residual min=-0.018769 max=0.019681 Jy/beam
! Clean residual mean=-0.000006 rms=0.004006 Jy/beam
! Combined flux in latest and established models = 1.59657 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 1.59657 Jy
! Inverting map 
! Added new window around map position (0.2, 19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125813 Jy
! Component: 100  -  total flux cleaned = 0.0131164 Jy
! Component: 150  -  total flux cleaned = 0.01266 Jy
! Component: 200  -  total flux cleaned = 0.0126792 Jy
! Total flux subtracted in 200 components = 0.0126792 Jy
! Clean residual min=-0.015673 max=0.015007 Jy/beam
! Clean residual mean=0.000007 rms=0.003366 Jy/beam
! Combined flux in latest and established models = 1.60925 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 75 components and 1.60925 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.944 mas, bmaj=5.685 mas, bpa=9.312 degrees
! Estimated noise=1.10376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208558 Jy
! Component: 100  -  total flux cleaned = 0.00241613 Jy
! Component: 150  -  total flux cleaned = 0.00212551 Jy
! Component: 200  -  total flux cleaned = 0.00212434 Jy
! Total flux subtracted in 200 components = 0.00212434 Jy
! Clean residual min=-0.016710 max=0.018196 Jy/beam
! Clean residual mean=0.000030 rms=0.005512 Jy/beam
! Combined flux in latest and established models = 1.61138 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000242063 Jy
! Component: 100  -  total flux cleaned = -0.000454888 Jy
! Component: 150  -  total flux cleaned = -0.00108226 Jy
! Component: 200  -  total flux cleaned = -0.00146378 Jy
! Total flux subtracted in 200 components = -0.00146378 Jy
! Clean residual min=-0.016239 max=0.017120 Jy/beam
! Clean residual mean=0.000031 rms=0.005249 Jy/beam
! Combined flux in latest and established models = 1.60991 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 97 components and 1.60991 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6762 mas, bmaj=1.6 mas, bpa=7.167 degrees
! Estimated noise=0.712065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198706 Jy
! Component: 100  -  total flux cleaned = -0.0012668 Jy
! Component: 150  -  total flux cleaned = -0.000942414 Jy
! Component: 200  -  total flux cleaned = -0.00126009 Jy
! Total flux subtracted in 200 components = -0.00126009 Jy
! Clean residual min=-0.013328 max=0.013359 Jy/beam
! Clean residual mean=0.000008 rms=0.002950 Jy/beam
! Combined flux in latest and established models = 1.60865 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 116 components and 1.60865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.351007Jy  sigma=4.184166
! Fit after  self-cal, rms=0.350915Jy  sigma=4.181751
wmodel /J1700-2610_X_map.mod
! wmodel: Unable to open new model file: /J1700-2610_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1700-2610_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6762 x 1.6 at 7.167 degrees (North through East)
! Clean map  min=-0.016342  max=1.2376 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1700-2610_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.23758 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00285044 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.690967 0.690967 1.38193 2.76387 5.52774 11.0555 22.111 44.2219 88.4438
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0085 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.237 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  434.173 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1700-2610_X_dfm.log closed on Fri May 20 00:15:14 2016