! Started logfile: /scr/pima/bg219a_uvs/J1653-1551_X_dfm.log on Fri May 20 00:14:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1653-1551_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1653-1551_X_uva.fits
! AN table 1: 41 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.978862 visibilities/baseline/integration-bin.
! Found source: J1653-1551
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7224 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1653-1551_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004679Jy  sigma=26.584251
! Fit after  self-cal, rms=0.868367Jy  sigma=22.894399
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5772 mas, bmaj=1.529 mas, bpa=1.167 degrees
! Estimated noise=0.578994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0992292 Jy
! Component: 100  -  total flux cleaned = 0.122641 Jy
! Total flux subtracted in 100 components = 0.122641 Jy
! Clean residual min=-0.006010 max=0.009619 Jy/beam
! Clean residual mean=-0.000015 rms=0.001614 Jy/beam
! Combined flux in latest and established models = 0.122641 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.122641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056417Jy  sigma=1.454573
! Fit after  self-cal, rms=0.056370Jy  sigma=1.453074
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109072 Jy
! Component: 100  -  total flux cleaned = 0.0169635 Jy
! Total flux subtracted in 100 components = 0.0169635 Jy
! Clean residual min=-0.004106 max=0.004504 Jy/beam
! Clean residual mean=-0.000008 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.139604 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.139604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053504Jy  sigma=1.366108
! Fit after  self-cal, rms=0.053517Jy  sigma=1.365576
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6913 mas, bmaj=1.774 mas, bpa=0.6009 degrees
! Estimated noise=0.321617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00584406 Jy
! Component: 100  -  total flux cleaned = 0.00879354 Jy
! Component: 150  -  total flux cleaned = 0.010408 Jy
! Component: 200  -  total flux cleaned = 0.0112947 Jy
! Total flux subtracted in 200 components = 0.0112947 Jy
! Clean residual min=-0.002511 max=0.003560 Jy/beam
! Clean residual mean=0.000001 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.150899 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.150899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052945Jy  sigma=1.348604
! Fit after  self-cal, rms=0.052957Jy  sigma=1.348476
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6913 x 1.774 at 0.6009 degrees (North through East)
! Clean map  min=-0.0022755  max=0.13365 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.05     NL        1.01     OV        1.02     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        1.03     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.04     NL        1.01     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.99     NL        1.01     OV        0.99     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        1.02     OV        1.01     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        1.01     OV        1.04     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.96     NL        1.04     OV        1.02     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.97     NL        0.99     OV        1.04     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.06     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.98     NL        1.01     OV        1.06     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.94     MK        0.96     NL        0.97     OV        1.06     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.93     MK        1.04     NL        1.04     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.052957Jy  sigma=1.348476
! Fit after  self-cal, rms=0.052658Jy  sigma=1.341751
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6917 mas, bmaj=1.775 mas, bpa=0.6631 degrees
! Estimated noise=0.320937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296998 Jy
! Component: 100  -  total flux cleaned = 0.0039959 Jy
! Component: 150  -  total flux cleaned = 0.00440949 Jy
! Component: 200  -  total flux cleaned = 0.00471871 Jy
! Total flux subtracted in 200 components = 0.00471871 Jy
! Clean residual min=-0.001653 max=0.001694 Jy/beam
! Clean residual mean=-0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.155618 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.155618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052503Jy  sigma=1.337504
! Fit after  self-cal, rms=0.052496Jy  sigma=1.337198
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052496Jy  sigma=1.337198
! Fit after  self-cal, rms=0.052473Jy  sigma=1.332394
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6907 mas, bmaj=1.781 mas, bpa=0.6315 degrees
! Estimated noise=0.320249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000819556 Jy
! Component: 100  -  total flux cleaned = 0.000960391 Jy
! Component: 150  -  total flux cleaned = 0.00106111 Jy
! Component: 200  -  total flux cleaned = 0.00113658 Jy
! Total flux subtracted in 200 components = 0.00113658 Jy
! Clean residual min=-0.001207 max=0.001390 Jy/beam
! Clean residual mean=0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.156754 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 57 components and 0.156754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052460Jy  sigma=1.332023
! Fit after  self-cal, rms=0.052469Jy  sigma=1.331959
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (47.4, -36.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000766821 Jy
! Component: 100  -  total flux cleaned = 0.00085052 Jy
! Component: 150  -  total flux cleaned = 0.000938266 Jy
! Component: 200  -  total flux cleaned = 0.0010428 Jy
! Total flux subtracted in 200 components = 0.0010428 Jy
! Clean residual min=-0.001211 max=0.001295 Jy/beam
! Clean residual mean=0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.157797 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 74 components and 0.157797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052435Jy  sigma=1.331193
! Fit after  self-cal, rms=0.052433Jy  sigma=1.331108
! Inverting map 
! Added new window around map position (-43.2, -34).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00083554 Jy
! Component: 100  -  total flux cleaned = 0.00104998 Jy
! Component: 150  -  total flux cleaned = 0.00129133 Jy
! Component: 200  -  total flux cleaned = 0.00147772 Jy
! Total flux subtracted in 200 components = 0.00147772 Jy
! Clean residual min=-0.001154 max=0.001097 Jy/beam
! Clean residual mean=-0.000002 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.159275 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.159275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052403Jy  sigma=1.330317
! Fit after  self-cal, rms=0.052400Jy  sigma=1.330238
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052400Jy  sigma=1.330238
! Fit after  self-cal, rms=0.052325Jy  sigma=1.329964
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.69 mas, bmaj=1.781 mas, bpa=0.6057 degrees
! Estimated noise=0.319619 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000656688 Jy
! Component: 100  -  total flux cleaned = 0.00087265 Jy
! Component: 150  -  total flux cleaned = 0.00107053 Jy
! Component: 200  -  total flux cleaned = 0.0012158 Jy
! Total flux subtracted in 200 components = 0.0012158 Jy
! Clean residual min=-0.001080 max=0.001137 Jy/beam
! Clean residual mean=-0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.16049 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 93 components and 0.16049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052312Jy  sigma=1.329644
! Fit after  self-cal, rms=0.052312Jy  sigma=1.329620
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017332 Jy
! Component: 100  -  total flux cleaned = 0.000278628 Jy
! Component: 150  -  total flux cleaned = 0.000351862 Jy
! Component: 200  -  total flux cleaned = 0.000420978 Jy
! Total flux subtracted in 200 components = 0.000420978 Jy
! Clean residual min=-0.001088 max=0.001115 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.160911 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 104 components and 0.160911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052306Jy  sigma=1.329492
! Fit after  self-cal, rms=0.052306Jy  sigma=1.329489
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052306Jy  sigma=1.329489
! Fit after  self-cal, rms=0.052274Jy  sigma=1.329439
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=5.384 mas, bpa=-0.2992 degrees
! Estimated noise=0.458827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000345438 Jy
! Component: 100  -  total flux cleaned = 0.000407365 Jy
! Component: 150  -  total flux cleaned = 0.000446974 Jy
! Component: 200  -  total flux cleaned = 0.00047229 Jy
! Total flux subtracted in 200 components = 0.00047229 Jy
! Clean residual min=-0.000855 max=0.000980 Jy/beam
! Clean residual mean=-0.000003 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.161384 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 118 components and 0.161384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052275Jy  sigma=1.329462
! Fit after  self-cal, rms=0.052273Jy  sigma=1.329449
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.8729e-05 Jy
! Component: 100  -  total flux cleaned = 2.31773e-05 Jy
! Component: 150  -  total flux cleaned = 2.29955e-05 Jy
! Component: 200  -  total flux cleaned = 8.5967e-06 Jy
! Total flux subtracted in 200 components = 8.5967e-06 Jy
! Clean residual min=-0.000865 max=0.000965 Jy/beam
! Clean residual mean=-0.000003 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.161392 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 121 components and 0.161392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052274Jy  sigma=1.329469
! Fit after  self-cal, rms=0.052274Jy  sigma=1.329467
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6897 mas, bmaj=1.781 mas, bpa=0.5998 degrees
! Estimated noise=0.319399 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6897 x 1.781 at 0.5998 degrees (North through East)
! Clean map  min=-0.0010083  max=0.13375 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5755 mas, bmaj=1.537 mas, bpa=1.209 degrees
! Estimated noise=0.577357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0988342 Jy
! Component: 100  -  total flux cleaned = 0.122586 Jy
! Component: 150  -  total flux cleaned = 0.133703 Jy
! Component: 200  -  total flux cleaned = 0.139892 Jy
! Total flux subtracted in 200 components = 0.139892 Jy
! Clean residual min=-0.003952 max=0.003998 Jy/beam
! Clean residual mean=-0.000004 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.139892 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.139892 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6897 mas, bmaj=1.781 mas, bpa=0.5998 degrees
! Estimated noise=0.319399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565386 Jy
! Component: 100  -  total flux cleaned = 0.00899302 Jy
! Component: 150  -  total flux cleaned = 0.0114309 Jy
! Component: 200  -  total flux cleaned = 0.0133839 Jy
! Total flux subtracted in 200 components = 0.0133839 Jy
! Clean residual min=-0.001758 max=0.001544 Jy/beam
! Clean residual mean=0.000004 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.153276 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 41 components and 0.153276 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=5.384 mas, bpa=-0.2992 degrees
! Estimated noise=0.458827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00266314 Jy
! Component: 100  -  total flux cleaned = 0.0041469 Jy
! Component: 150  -  total flux cleaned = 0.00518781 Jy
! Component: 200  -  total flux cleaned = 0.00594146 Jy
! Total flux subtracted in 200 components = 0.00594146 Jy
! Clean residual min=-0.001090 max=0.000966 Jy/beam
! Clean residual mean=0.000000 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.159218 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000578848 Jy
! Component: 100  -  total flux cleaned = 0.00103536 Jy
! Component: 150  -  total flux cleaned = 0.00139601 Jy
! Component: 200  -  total flux cleaned = 0.0015859 Jy
! Total flux subtracted in 200 components = 0.0015859 Jy
! Clean residual min=-0.000891 max=0.000998 Jy/beam
! Clean residual mean=-0.000003 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.160804 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 87 components and 0.160804 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6897 mas, bmaj=1.781 mas, bpa=0.5998 degrees
! Estimated noise=0.319399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.46415e-05 Jy
! Component: 100  -  total flux cleaned = 0.000273408 Jy
! Component: 150  -  total flux cleaned = 0.000425107 Jy
! Component: 200  -  total flux cleaned = 0.000535212 Jy
! Total flux subtracted in 200 components = 0.000535212 Jy
! Clean residual min=-0.001207 max=0.001148 Jy/beam
! Clean residual mean=-0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.161339 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.161339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052311Jy  sigma=1.330322
! Fit after  self-cal, rms=0.052304Jy  sigma=1.330140
wmodel /J1653-1551_X_map.mod
! wmodel: Unable to open new model file: /J1653-1551_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1653-1551_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6897 x 1.781 at 0.5998 degrees (North through East)
! Clean map  min=-0.001173  max=0.13352 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1653-1551_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133518 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000274091 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.615852 0.615852 1.2317 2.46341 4.92682 9.85363 19.7073 39.4145 78.8291
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  487.13 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1653-1551_X_dfm.log closed on Fri May 20 00:14:45 2016