! Started logfile: /scr/pima/bg219a_uvs/J1653-1551_S_dfm.log on Fri May 20 00:14:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1653-1551_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1653-1551_S_uva.fits
! AN table 1: 41 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.978862 visibilities/baseline/integration-bin.
! Found source: J1653-1551
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2408 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1653-1551_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017577Jy  sigma=21.197912
! Fit after  self-cal, rms=0.850789Jy  sigma=17.734186
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.196 mas, bmaj=5.983 mas, bpa=-0.9676 degrees
! Estimated noise=0.945973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112764 Jy
! Component: 100  -  total flux cleaned = 0.141612 Jy
! Total flux subtracted in 100 components = 0.141612 Jy
! Clean residual min=-0.009452 max=0.013180 Jy/beam
! Clean residual mean=0.000010 rms=0.002539 Jy/beam
! Combined flux in latest and established models = 0.141612 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.141612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070056Jy  sigma=1.386993
! Fit after  self-cal, rms=0.070038Jy  sigma=1.386654
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.609 mas, bmaj=6.844 mas, bpa=-1.31 degrees
! Estimated noise=0.710493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207517 Jy
! Component: 100  -  total flux cleaned = 0.0311997 Jy
! Component: 150  -  total flux cleaned = 0.0368989 Jy
! Component: 200  -  total flux cleaned = 0.0400444 Jy
! Total flux subtracted in 200 components = 0.0400444 Jy
! Clean residual min=-0.003886 max=0.005439 Jy/beam
! Clean residual mean=0.000008 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.181657 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 23 components and 0.181657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064378Jy  sigma=1.248772
! Fit after  self-cal, rms=0.064376Jy  sigma=1.247402
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.609 x 6.844 at -1.31 degrees (North through East)
! Clean map  min=-0.0036127  max=0.15239 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.06     MK        1.06     NL        0.95     OV        1.00     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.06     NL        0.97     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.00     NL        0.97     OV        1.00     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.96     NL        0.99     OV        0.95     
!   PT        0.98     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.064376Jy  sigma=1.247402
! Fit after  self-cal, rms=0.064017Jy  sigma=1.237909
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.628 mas, bmaj=6.87 mas, bpa=-1.337 degrees
! Estimated noise=0.706969 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6, -8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00357289 Jy
! Component: 100  -  total flux cleaned = 0.00374972 Jy
! Component: 150  -  total flux cleaned = 0.00355331 Jy
! Component: 200  -  total flux cleaned = 0.00355241 Jy
! Total flux subtracted in 200 components = 0.00355241 Jy
! Clean residual min=-0.003186 max=0.003267 Jy/beam
! Clean residual mean=0.000004 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.185209 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 42 components and 0.185209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063686Jy  sigma=1.231221
! Fit after  self-cal, rms=0.063665Jy  sigma=1.230783
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063665Jy  sigma=1.230783
! Fit after  self-cal, rms=0.063144Jy  sigma=1.227238
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.619 mas, bmaj=6.851 mas, bpa=-1.404 degrees
! Estimated noise=0.70288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000637521 Jy
! Component: 100  -  total flux cleaned = 0.000506619 Jy
! Component: 150  -  total flux cleaned = 0.000391084 Jy
! Component: 200  -  total flux cleaned = 0.000313904 Jy
! Total flux subtracted in 200 components = 0.000313904 Jy
! Clean residual min=-0.002892 max=0.003328 Jy/beam
! Clean residual mean=0.000001 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.185523 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 57 components and 0.185523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063103Jy  sigma=1.226455
! Fit after  self-cal, rms=0.063105Jy  sigma=1.226397
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-54.5, 21.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208447 Jy
! Component: 100  -  total flux cleaned = 0.00229833 Jy
! Component: 150  -  total flux cleaned = 0.00273144 Jy
! Component: 200  -  total flux cleaned = 0.00307178 Jy
! Total flux subtracted in 200 components = 0.00307178 Jy
! Clean residual min=-0.002726 max=0.002600 Jy/beam
! Clean residual mean=0.000001 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.188595 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 79 components and 0.188595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062953Jy  sigma=1.223646
! Fit after  self-cal, rms=0.062948Jy  sigma=1.223358
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062948Jy  sigma=1.223358
! Fit after  self-cal, rms=0.062694Jy  sigma=1.223026
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.615 mas, bmaj=6.842 mas, bpa=-1.407 degrees
! Estimated noise=0.701115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000794643 Jy
! Component: 100  -  total flux cleaned = 0.00106279 Jy
! Component: 150  -  total flux cleaned = 0.00126428 Jy
! Component: 200  -  total flux cleaned = 0.00141467 Jy
! Total flux subtracted in 200 components = 0.00141467 Jy
! Clean residual min=-0.002684 max=0.002400 Jy/beam
! Clean residual mean=0.000000 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.19001 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 88 components and 0.19001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062643Jy  sigma=1.222195
! Fit after  self-cal, rms=0.062640Jy  sigma=1.222137
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255103 Jy
! Component: 100  -  total flux cleaned = 0.000365371 Jy
! Component: 150  -  total flux cleaned = 0.000468705 Jy
! Component: 200  -  total flux cleaned = 0.000541492 Jy
! Total flux subtracted in 200 components = 0.000541492 Jy
! Clean residual min=-0.002666 max=0.002403 Jy/beam
! Clean residual mean=0.000000 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.190551 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 0.190551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062616Jy  sigma=1.221782
! Fit after  self-cal, rms=0.062616Jy  sigma=1.221770
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062616Jy  sigma=1.221770
! Fit after  self-cal, rms=0.062523Jy  sigma=1.221644
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.188 mas, bmaj=17.71 mas, bpa=-0.6792 degrees
! Estimated noise=0.980224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115938 Jy
! Component: 100  -  total flux cleaned = -0.000114039 Jy
! Component: 150  -  total flux cleaned = -0.00011375 Jy
! Component: 200  -  total flux cleaned = -0.000114094 Jy
! Total flux subtracted in 200 components = -0.000114094 Jy
! Clean residual min=-0.002693 max=0.001887 Jy/beam
! Clean residual mean=0.000002 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.190437 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 112 components and 0.190437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062527Jy  sigma=1.221611
! Fit after  self-cal, rms=0.062525Jy  sigma=1.221595
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.34607e-05 Jy
! Component: 100  -  total flux cleaned = -2.39752e-05 Jy
! Component: 150  -  total flux cleaned = -5.32684e-05 Jy
! Component: 200  -  total flux cleaned = -9.02402e-05 Jy
! Total flux subtracted in 200 components = -9.02402e-05 Jy
! Clean residual min=-0.002710 max=0.001855 Jy/beam
! Clean residual mean=0.000003 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.190347 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 118 components and 0.190347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062526Jy  sigma=1.221582
! Fit after  self-cal, rms=0.062526Jy  sigma=1.221576
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.612 mas, bmaj=6.837 mas, bpa=-1.428 degrees
! Estimated noise=0.700479 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.612 x 6.837 at -1.428 degrees (North through East)
! Clean map  min=-0.0025154  max=0.15141 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=5.97 mas, bpa=-1.119 degrees
! Estimated noise=0.928582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110501 Jy
! Component: 100  -  total flux cleaned = 0.139222 Jy
! Component: 150  -  total flux cleaned = 0.154326 Jy
! Component: 200  -  total flux cleaned = 0.163026 Jy
! Total flux subtracted in 200 components = 0.163026 Jy
! Clean residual min=-0.005067 max=0.006439 Jy/beam
! Clean residual mean=0.000004 rms=0.001410 Jy/beam
! Combined flux in latest and established models = 0.163026 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.163026 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.612 mas, bmaj=6.837 mas, bpa=-1.428 degrees
! Estimated noise=0.700479 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00922519 Jy
! Component: 100  -  total flux cleaned = 0.0147516 Jy
! Component: 150  -  total flux cleaned = 0.0186663 Jy
! Component: 200  -  total flux cleaned = 0.0207817 Jy
! Total flux subtracted in 200 components = 0.0207817 Jy
! Clean residual min=-0.003437 max=0.002872 Jy/beam
! Clean residual mean=0.000004 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.183808 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 46 components and 0.183808 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.188 mas, bmaj=17.71 mas, bpa=-0.6792 degrees
! Estimated noise=0.980224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285715 Jy
! Component: 100  -  total flux cleaned = 0.00407062 Jy
! Component: 150  -  total flux cleaned = 0.00486651 Jy
! Component: 200  -  total flux cleaned = 0.00527645 Jy
! Total flux subtracted in 200 components = 0.00527645 Jy
! Clean residual min=-0.002814 max=0.001813 Jy/beam
! Clean residual mean=0.000006 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.189085 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204201 Jy
! Component: 100  -  total flux cleaned = 0.00032719 Jy
! Component: 150  -  total flux cleaned = 0.000385938 Jy
! Component: 200  -  total flux cleaned = 0.000396283 Jy
! Total flux subtracted in 200 components = 0.000396283 Jy
! Clean residual min=-0.002812 max=0.001815 Jy/beam
! Clean residual mean=0.000005 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.189481 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 67 components and 0.189481 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.612 mas, bmaj=6.837 mas, bpa=-1.428 degrees
! Estimated noise=0.700479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000279499 Jy
! Component: 100  -  total flux cleaned = -0.000280963 Jy
! Component: 150  -  total flux cleaned = -0.000224804 Jy
! Component: 200  -  total flux cleaned = -7.63798e-05 Jy
! Total flux subtracted in 200 components = -7.63798e-05 Jy
! Clean residual min=-0.002687 max=0.002443 Jy/beam
! Clean residual mean=0.000001 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.189404 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.189404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062591Jy  sigma=1.222785
! Fit after  self-cal, rms=0.062583Jy  sigma=1.222622
wmodel /J1653-1551_S_map.mod
! wmodel: Unable to open new model file: /J1653-1551_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1653-1551_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.612 x 6.837 at -1.428 degrees (North through East)
! Clean map  min=-0.0025893  max=0.15062 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1653-1551_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.150624 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000607128 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.20922 1.20922 2.41844 4.83689 9.67378 19.3476 38.6951 77.3902
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.15 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  248.093 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1653-1551_S_dfm.log closed on Fri May 20 00:14:42 2016