! Started logfile: /scr/pima/bg219a_uvs/J1642+6856_S_dfm.log on Fri May 20 00:14:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1642+6856_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1642+6856_S_uva.fits
! AN table 1: 18 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.716931 visibilities/baseline/integration-bin.
! Found source: J1642+6856
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1084 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1642+6856_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.796950Jy  sigma=27.002167
! Fit after  self-cal, rms=0.499118Jy  sigma=7.383430
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.591 mas, bmaj=3.931 mas, bpa=87 degrees
! Estimated noise=2.16898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.13067 Jy
! Component: 100  -  total flux cleaned = 1.38192 Jy
! Total flux subtracted in 100 components = 1.38192 Jy
! Clean residual min=-0.056979 max=0.081694 Jy/beam
! Clean residual mean=-0.000658 rms=0.012924 Jy/beam
! Combined flux in latest and established models = 1.38192 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.38192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182690Jy  sigma=2.632535
! Fit after  self-cal, rms=0.182540Jy  sigma=2.632032
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0820146 Jy
! Component: 100  -  total flux cleaned = 0.12415 Jy
! Total flux subtracted in 100 components = 0.12415 Jy
! Clean residual min=-0.037747 max=0.062399 Jy/beam
! Clean residual mean=-0.000420 rms=0.008479 Jy/beam
! Combined flux in latest and established models = 1.50607 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 1.50607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134395Jy  sigma=1.848763
! Fit after  self-cal, rms=0.133735Jy  sigma=1.845508
! Inverting map 
! Added new window around map position (-1, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532747 Jy
! Component: 100  -  total flux cleaned = 0.0800083 Jy
! Total flux subtracted in 100 components = 0.0800083 Jy
! Clean residual min=-0.025619 max=0.024486 Jy/beam
! Clean residual mean=-0.000295 rms=0.005650 Jy/beam
! Combined flux in latest and established models = 1.58608 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 1.58608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104242Jy  sigma=1.441189
! Fit after  self-cal, rms=0.099725Jy  sigma=1.387556
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.081 mas, bmaj=4.711 mas, bpa=82.51 degrees
! Estimated noise=1.67874 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0292137 Jy
! Component: 100  -  total flux cleaned = 0.0470763 Jy
! Component: 150  -  total flux cleaned = 0.0599575 Jy
! Component: 200  -  total flux cleaned = 0.0694993 Jy
! Total flux subtracted in 200 components = 0.0694993 Jy
! Clean residual min=-0.017976 max=0.020629 Jy/beam
! Clean residual mean=-0.000489 rms=0.004782 Jy/beam
! Combined flux in latest and established models = 1.65558 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 38 components and 1.65558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088663Jy  sigma=1.239393
! Fit after  self-cal, rms=0.086936Jy  sigma=1.215210
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.081 x 4.711 at 82.51 degrees (North through East)
! Clean map  min=-0.017749  max=1.4677 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.99     MK        1.04     NL        0.99     
!   OV        1.02     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        1.00     MK        1.02     NL        1.00     
!   OV        1.01     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.99     MK        1.00     NL        1.00     
!   OV        1.01     PT        0.96     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        0.98     MK        1.01     NL        0.99     
!   OV        1.00     PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.086936Jy  sigma=1.215210
! Fit after  self-cal, rms=0.078349Jy  sigma=1.089760
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.083 mas, bmaj=4.717 mas, bpa=82.2 degrees
! Estimated noise=1.67424 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00893059 Jy
! Component: 100  -  total flux cleaned = 0.00999764 Jy
! Component: 150  -  total flux cleaned = 0.0107414 Jy
! Component: 200  -  total flux cleaned = 0.0111454 Jy
! Total flux subtracted in 200 components = 0.0111454 Jy
! Clean residual min=-0.009712 max=0.010050 Jy/beam
! Clean residual mean=-0.000135 rms=0.002401 Jy/beam
! Combined flux in latest and established models = 1.66672 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 49 components and 1.66672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077089Jy  sigma=1.073384
! Fit after  self-cal, rms=0.076895Jy  sigma=1.071462
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076895Jy  sigma=1.071462
! Fit after  self-cal, rms=0.075962Jy  sigma=1.057005
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.084 mas, bmaj=4.71 mas, bpa=82.36 degrees
! Estimated noise=1.67281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00251028 Jy
! Component: 100  -  total flux cleaned = 0.00297546 Jy
! Component: 150  -  total flux cleaned = 0.00313374 Jy
! Component: 200  -  total flux cleaned = 0.00327628 Jy
! Total flux subtracted in 200 components = 0.00327628 Jy
! Clean residual min=-0.007689 max=0.008677 Jy/beam
! Clean residual mean=-0.000082 rms=0.002105 Jy/beam
! Combined flux in latest and established models = 1.67 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 1.67 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075707Jy  sigma=1.054196
! Fit after  self-cal, rms=0.075640Jy  sigma=1.053847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000377835 Jy
! Component: 100  -  total flux cleaned = 0.000511405 Jy
! Component: 150  -  total flux cleaned = 0.000629402 Jy
! Component: 200  -  total flux cleaned = 0.000682784 Jy
! Total flux subtracted in 200 components = 0.000682784 Jy
! Clean residual min=-0.007777 max=0.008431 Jy/beam
! Clean residual mean=-0.000079 rms=0.002070 Jy/beam
! Combined flux in latest and established models = 1.67068 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 59 components and 1.67068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075516Jy  sigma=1.052608
! Fit after  self-cal, rms=0.075474Jy  sigma=1.052427
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075474Jy  sigma=1.052427
! Fit after  self-cal, rms=0.075479Jy  sigma=1.051976
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.083 mas, bmaj=4.708 mas, bpa=82.4 degrees
! Estimated noise=1.67273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000790816 Jy
! Component: 100  -  total flux cleaned = 0.000974526 Jy
! Component: 150  -  total flux cleaned = 0.00103119 Jy
! Component: 200  -  total flux cleaned = 0.00108382 Jy
! Total flux subtracted in 200 components = 0.00108382 Jy
! Clean residual min=-0.007585 max=0.008025 Jy/beam
! Clean residual mean=-0.000079 rms=0.002034 Jy/beam
! Combined flux in latest and established models = 1.67177 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 61 components and 1.67177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075368Jy  sigma=1.050870
! Fit after  self-cal, rms=0.075337Jy  sigma=1.050756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126525 Jy
! Component: 100  -  total flux cleaned = 0.000173894 Jy
! Component: 150  -  total flux cleaned = 0.000218143 Jy
! Component: 200  -  total flux cleaned = 0.000263598 Jy
! Total flux subtracted in 200 components = 0.000263598 Jy
! Clean residual min=-0.007600 max=0.007861 Jy/beam
! Clean residual mean=-0.000078 rms=0.002013 Jy/beam
! Combined flux in latest and established models = 1.67203 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 1.67203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075270Jy  sigma=1.050036
! Fit after  self-cal, rms=0.075248Jy  sigma=1.049965
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075248Jy  sigma=1.049965
! Fit after  self-cal, rms=0.075267Jy  sigma=1.049808
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.471 mas, bmaj=10.84 mas, bpa=75.93 degrees
! Estimated noise=2.17287 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149423 Jy
! Component: 100  -  total flux cleaned = 0.00212911 Jy
! Component: 150  -  total flux cleaned = 0.00236981 Jy
! Component: 200  -  total flux cleaned = 0.00255797 Jy
! Total flux subtracted in 200 components = 0.00255797 Jy
! Clean residual min=-0.008850 max=0.009419 Jy/beam
! Clean residual mean=-0.000176 rms=0.002733 Jy/beam
! Combined flux in latest and established models = 1.67459 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 1.67459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075246Jy  sigma=1.049463
! Fit after  self-cal, rms=0.075133Jy  sigma=1.048472
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.98997e-05 Jy
! Component: 100  -  total flux cleaned = 0.000393232 Jy
! Component: 150  -  total flux cleaned = 0.000445112 Jy
! Component: 200  -  total flux cleaned = 0.000536795 Jy
! Total flux subtracted in 200 components = 0.000536795 Jy
! Clean residual min=-0.008719 max=0.009116 Jy/beam
! Clean residual mean=-0.000170 rms=0.002653 Jy/beam
! Combined flux in latest and established models = 1.67513 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 67 components and 1.67513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075199Jy  sigma=1.048779
! Fit after  self-cal, rms=0.075124Jy  sigma=1.048141
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.083 mas, bmaj=4.707 mas, bpa=82.44 degrees
! Estimated noise=1.67276 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.083 x 4.707 at 82.44 degrees (North through East)
! Clean map  min=-0.0078883  max=1.4645 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075124Jy  sigma=1.048141
! Fit after  self-cal, rms=0.055289Jy  sigma=0.668107
! Inverting map and beam 
! Estimated beam: bmin=3.083 mas, bmaj=4.704 mas, bpa=82.55 degrees
! Estimated noise=1.67268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00080864 Jy
! Component: 100  -  total flux cleaned = -0.000316274 Jy
! Component: 150  -  total flux cleaned = -0.000194816 Jy
! Component: 200  -  total flux cleaned = -0.000303586 Jy
! Total flux subtracted in 200 components = -0.000303586 Jy
! Clean residual min=-0.007469 max=0.007631 Jy/beam
! Clean residual mean=-0.000058 rms=0.001821 Jy/beam
! Combined flux in latest and established models = 1.67482 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 1.67482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055077Jy  sigma=0.665852
! Fit after  self-cal, rms=0.055058Jy  sigma=0.665719
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000180622 Jy
! Component: 100  -  total flux cleaned = -0.000230196 Jy
! Component: 150  -  total flux cleaned = -0.000371695 Jy
! Component: 200  -  total flux cleaned = -0.000416522 Jy
! Total flux subtracted in 200 components = -0.000416522 Jy
! Clean residual min=-0.007340 max=0.007442 Jy/beam
! Clean residual mean=-0.000060 rms=0.001799 Jy/beam
! Combined flux in latest and established models = 1.6744 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 77 components and 1.6744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054972Jy  sigma=0.664653
! Fit after  self-cal, rms=0.054964Jy  sigma=0.664622
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054964Jy  sigma=0.664622
! Fit after  self-cal, rms=0.054974Jy  sigma=0.664264
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.591 mas, bmaj=3.924 mas, bpa=87.13 degrees
! Estimated noise=2.16102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.12641 Jy
! Component: 100  -  total flux cleaned = 1.37749 Jy
! Component: 150  -  total flux cleaned = 1.46834 Jy
! Component: 200  -  total flux cleaned = 1.52156 Jy
! Total flux subtracted in 200 components = 1.52156 Jy
! Clean residual min=-0.022546 max=0.028412 Jy/beam
! Clean residual mean=-0.000291 rms=0.005967 Jy/beam
! Combined flux in latest and established models = 1.52156 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 1.52156 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.083 mas, bmaj=4.703 mas, bpa=82.55 degrees
! Estimated noise=1.67316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0506305 Jy
! Component: 100  -  total flux cleaned = 0.0828064 Jy
! Component: 150  -  total flux cleaned = 0.103992 Jy
! Component: 200  -  total flux cleaned = 0.118595 Jy
! Total flux subtracted in 200 components = 0.118595 Jy
! Clean residual min=-0.010546 max=0.012263 Jy/beam
! Clean residual mean=-0.000219 rms=0.002993 Jy/beam
! Combined flux in latest and established models = 1.64016 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 43 components and 1.64016 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.468 mas, bmaj=10.84 mas, bpa=75.95 degrees
! Estimated noise=2.1746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193796 Jy
! Component: 100  -  total flux cleaned = 0.0286681 Jy
! Component: 150  -  total flux cleaned = 0.0319898 Jy
! Component: 200  -  total flux cleaned = 0.0330902 Jy
! Total flux subtracted in 200 components = 0.0330902 Jy
! Clean residual min=-0.009848 max=0.010269 Jy/beam
! Clean residual mean=-0.000162 rms=0.002663 Jy/beam
! Combined flux in latest and established models = 1.67325 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000975579 Jy
! Component: 100  -  total flux cleaned = 0.00155543 Jy
! Component: 150  -  total flux cleaned = 0.00210489 Jy
! Component: 200  -  total flux cleaned = 0.00248281 Jy
! Total flux subtracted in 200 components = 0.00248281 Jy
! Clean residual min=-0.008970 max=0.009457 Jy/beam
! Clean residual mean=-0.000133 rms=0.002491 Jy/beam
! Combined flux in latest and established models = 1.67573 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 59 components and 1.67573 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.083 mas, bmaj=4.703 mas, bpa=82.55 degrees
! Estimated noise=1.67316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000956434 Jy
! Component: 100  -  total flux cleaned = -0.000432756 Jy
! Component: 150  -  total flux cleaned = 3.98113e-05 Jy
! Component: 200  -  total flux cleaned = 0.000344713 Jy
! Total flux subtracted in 200 components = 0.000344713 Jy
! Clean residual min=-0.008815 max=0.007926 Jy/beam
! Clean residual mean=-0.000050 rms=0.001915 Jy/beam
! Combined flux in latest and established models = 1.67608 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 1.67608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055710Jy  sigma=0.674470
! Fit after  self-cal, rms=0.055748Jy  sigma=0.672829
wmodel /J1642+6856_S_map.mod
! wmodel: Unable to open new model file: /J1642+6856_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1642+6856_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.083 x 4.703 at 82.55 degrees (North through East)
! Clean map  min=-0.0083544  max=1.461 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1642+6856_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.46098 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00189831 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.389803 0.389803 0.779606 1.55921 3.11842 6.23685 12.4737 24.9474 49.8948 99.7896
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0056 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.46 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  769.619 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1642+6856_S_dfm.log closed on Fri May 20 00:14:08 2016