! Started logfile: /scr/pima/bg219a_uvs/J1638-1415_X_dfm.log on Fri May 20 00:13:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1638-1415_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1638-1415_X_uva.fits
! AN table 1: 52 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.961538 visibilities/baseline/integration-bin.
! Found source: J1638-1415
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 9000 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1638-1415_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.034568Jy  sigma=27.114605
! Fit after  self-cal, rms=0.822359Jy  sigma=21.322731
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5623 mas, bmaj=1.544 mas, bpa=1.823 degrees
! Estimated noise=0.60995 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126832 Jy
! Component: 100  -  total flux cleaned = 0.165739 Jy
! Total flux subtracted in 100 components = 0.165739 Jy
! Clean residual min=-0.011342 max=0.018255 Jy/beam
! Clean residual mean=-0.000009 rms=0.002777 Jy/beam
! Combined flux in latest and established models = 0.165739 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.165739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068252Jy  sigma=1.785360
! Fit after  self-cal, rms=0.068223Jy  sigma=1.783400
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213952 Jy
! Component: 100  -  total flux cleaned = 0.0343621 Jy
! Total flux subtracted in 100 components = 0.0343621 Jy
! Clean residual min=-0.006245 max=0.007224 Jy/beam
! Clean residual mean=-0.000006 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 0.200101 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 10 components and 0.200101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057537Jy  sigma=1.465102
! Fit after  self-cal, rms=0.057525Jy  sigma=1.463939
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7134 mas, bmaj=1.796 mas, bpa=-0.07105 degrees
! Estimated noise=0.300057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013709 Jy
! Component: 100  -  total flux cleaned = 0.0209328 Jy
! Component: 150  -  total flux cleaned = 0.0248737 Jy
! Component: 200  -  total flux cleaned = 0.0270344 Jy
! Total flux subtracted in 200 components = 0.0270344 Jy
! Clean residual min=-0.003865 max=0.006069 Jy/beam
! Clean residual mean=0.000008 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.227135 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 31 components and 0.227135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054549Jy  sigma=1.374053
! Fit after  self-cal, rms=0.054551Jy  sigma=1.373271
! Inverting map 
! Added new window around map position (1.6, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557145 Jy
! Component: 100  -  total flux cleaned = 0.00797304 Jy
! Component: 150  -  total flux cleaned = 0.00954502 Jy
! Component: 200  -  total flux cleaned = 0.0101488 Jy
! Total flux subtracted in 200 components = 0.0101488 Jy
! Clean residual min=-0.002971 max=0.003323 Jy/beam
! Clean residual mean=0.000006 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.237284 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 50 components and 0.237284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054050Jy  sigma=1.358368
! Fit after  self-cal, rms=0.053997Jy  sigma=1.356917
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7134 x 1.796 at -0.07105 degrees (North through East)
! Clean map  min=-0.0024948  max=0.18112 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        1.03     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        1.00     OV        1.01     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        0.99     NL        1.03     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.03     OV        1.01     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        1.02     NL        1.03     OV        1.01     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.01     NL        1.03     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.01     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        0.98     NL        1.01     OV        1.00     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.00     NL        1.02     OV        1.02     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.96     NL        1.02     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.053997Jy  sigma=1.356917
! Fit after  self-cal, rms=0.053625Jy  sigma=1.351761
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7134 mas, bmaj=1.796 mas, bpa=-0.003479 degrees
! Estimated noise=0.298977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000422556 Jy
! Component: 100  -  total flux cleaned = 0.000620809 Jy
! Component: 150  -  total flux cleaned = 0.000648005 Jy
! Component: 200  -  total flux cleaned = 0.000648639 Jy
! Total flux subtracted in 200 components = 0.000648639 Jy
! Clean residual min=-0.002425 max=0.002187 Jy/beam
! Clean residual mean=0.000004 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.237933 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.237933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053589Jy  sigma=1.350794
! Fit after  self-cal, rms=0.053587Jy  sigma=1.350719
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053587Jy  sigma=1.350719
! Fit after  self-cal, rms=0.053710Jy  sigma=1.345959
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7126 mas, bmaj=1.801 mas, bpa=-0.03386 degrees
! Estimated noise=0.299156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285928 Jy
! Component: 100  -  total flux cleaned = 0.000224781 Jy
! Component: 150  -  total flux cleaned = 0.000239428 Jy
! Component: 200  -  total flux cleaned = 0.00025316 Jy
! Total flux subtracted in 200 components = 0.00025316 Jy
! Clean residual min=-0.001737 max=0.001895 Jy/beam
! Clean residual mean=0.000005 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.238186 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 65 components and 0.238186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053698Jy  sigma=1.345621
! Fit after  self-cal, rms=0.053701Jy  sigma=1.345574
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108763 Jy
! Component: 100  -  total flux cleaned = 0.000108025 Jy
! Component: 150  -  total flux cleaned = 6.68739e-05 Jy
! Component: 200  -  total flux cleaned = 5.69867e-05 Jy
! Total flux subtracted in 200 components = 5.69867e-05 Jy
! Clean residual min=-0.001730 max=0.001885 Jy/beam
! Clean residual mean=0.000005 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.238243 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 70 components and 0.238243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053697Jy  sigma=1.345453
! Fit after  self-cal, rms=0.053696Jy  sigma=1.345440
! Inverting map 
! Added new window around map position (-26.6, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108279 Jy
! Component: 100  -  total flux cleaned = 0.000961739 Jy
! Component: 150  -  total flux cleaned = 0.000800685 Jy
! Component: 200  -  total flux cleaned = 0.000664731 Jy
! Total flux subtracted in 200 components = 0.000664731 Jy
! Clean residual min=-0.001615 max=0.001673 Jy/beam
! Clean residual mean=0.000005 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.238907 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 91 components and 0.238907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053622Jy  sigma=1.343796
! Fit after  self-cal, rms=0.053619Jy  sigma=1.343726
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053619Jy  sigma=1.343726
! Fit after  self-cal, rms=0.053633Jy  sigma=1.343562
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7127 mas, bmaj=1.802 mas, bpa=-0.007216 degrees
! Estimated noise=0.298929 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.88337e-05 Jy
! Component: 100  -  total flux cleaned = 2.36924e-05 Jy
! Component: 150  -  total flux cleaned = 2.44032e-05 Jy
! Component: 200  -  total flux cleaned = 4.54483e-05 Jy
! Total flux subtracted in 200 components = 4.54483e-05 Jy
! Clean residual min=-0.001562 max=0.001616 Jy/beam
! Clean residual mean=0.000005 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.238953 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 0.238953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053614Jy  sigma=1.343113
! Fit after  self-cal, rms=0.053614Jy  sigma=1.343103
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (50.8, -43).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118202 Jy
! Component: 100  -  total flux cleaned = 0.0013294 Jy
! Component: 150  -  total flux cleaned = 0.00152114 Jy
! Component: 200  -  total flux cleaned = 0.00155959 Jy
! Total flux subtracted in 200 components = 0.00155959 Jy
! Clean residual min=-0.001402 max=0.001359 Jy/beam
! Clean residual mean=0.000003 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.240512 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 0.240513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053575Jy  sigma=1.342176
! Fit after  self-cal, rms=0.053573Jy  sigma=1.342114
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053573Jy  sigma=1.342114
! Fit after  self-cal, rms=0.053568Jy  sigma=1.342033
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.085 mas, bmaj=5.338 mas, bpa=-0.04582 degrees
! Estimated noise=0.423552 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.23192e-05 Jy
! Component: 100  -  total flux cleaned = 0.00018778 Jy
! Component: 150  -  total flux cleaned = 0.000346593 Jy
! Component: 200  -  total flux cleaned = 0.000434886 Jy
! Total flux subtracted in 200 components = 0.000434886 Jy
! Clean residual min=-0.001367 max=0.001575 Jy/beam
! Clean residual mean=0.000007 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.240947 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 116 components and 0.240947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053567Jy  sigma=1.342019
! Fit after  self-cal, rms=0.053567Jy  sigma=1.342004
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.62193e-05 Jy
! Component: 100  -  total flux cleaned = 4.01906e-05 Jy
! Component: 150  -  total flux cleaned = 7.02561e-05 Jy
! Component: 200  -  total flux cleaned = 8.86301e-05 Jy
! Total flux subtracted in 200 components = 8.86301e-05 Jy
! Clean residual min=-0.001258 max=0.001514 Jy/beam
! Clean residual mean=0.000006 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.241036 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 121 components and 0.241036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053567Jy  sigma=1.342002
! Fit after  self-cal, rms=0.053566Jy  sigma=1.341998
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7128 mas, bmaj=1.803 mas, bpa=-0.0123 degrees
! Estimated noise=0.298821 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7128 x 1.803 at -0.0123 degrees (North through East)
! Clean map  min=-0.0019523  max=0.18057 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5617 mas, bmaj=1.551 mas, bpa=1.873 degrees
! Estimated noise=0.607591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126245 Jy
! Component: 100  -  total flux cleaned = 0.165733 Jy
! Component: 150  -  total flux cleaned = 0.187078 Jy
! Component: 200  -  total flux cleaned = 0.200157 Jy
! Total flux subtracted in 200 components = 0.200157 Jy
! Clean residual min=-0.005600 max=0.006961 Jy/beam
! Clean residual mean=-0.000004 rms=0.001424 Jy/beam
! Combined flux in latest and established models = 0.200157 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.200157 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7128 mas, bmaj=1.803 mas, bpa=-0.0123 degrees
! Estimated noise=0.298821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139357 Jy
! Component: 100  -  total flux cleaned = 0.02175 Jy
! Component: 150  -  total flux cleaned = 0.0264335 Jy
! Component: 200  -  total flux cleaned = 0.0294892 Jy
! Total flux subtracted in 200 components = 0.0294892 Jy
! Clean residual min=-0.002432 max=0.002641 Jy/beam
! Clean residual mean=0.000008 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.229647 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 42 components and 0.229647 Jy
! Inverting map 
! Added new window around map position (-5.6, 15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00229734 Jy
! Component: 100  -  total flux cleaned = 0.00359503 Jy
! Component: 150  -  total flux cleaned = 0.00475284 Jy
! Component: 200  -  total flux cleaned = 0.00574519 Jy
! Total flux subtracted in 200 components = 0.00574519 Jy
! Clean residual min=-0.001819 max=0.001565 Jy/beam
! Clean residual mean=0.000005 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.235392 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 67 components and 0.235392 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.085 mas, bmaj=5.338 mas, bpa=-0.04582 degrees
! Estimated noise=0.423552 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145474 Jy
! Component: 100  -  total flux cleaned = 0.00185532 Jy
! Component: 150  -  total flux cleaned = 0.00227442 Jy
! Component: 200  -  total flux cleaned = 0.00263134 Jy
! Total flux subtracted in 200 components = 0.00263134 Jy
! Clean residual min=-0.001890 max=0.001376 Jy/beam
! Clean residual mean=0.000011 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.238023 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000335061 Jy
! Component: 100  -  total flux cleaned = 0.000602697 Jy
! Component: 150  -  total flux cleaned = 0.000836822 Jy
! Component: 200  -  total flux cleaned = 0.000993637 Jy
! Total flux subtracted in 200 components = 0.000993637 Jy
! Clean residual min=-0.001562 max=0.001285 Jy/beam
! Clean residual mean=0.000009 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.239017 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 102 components and 0.239017 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7128 mas, bmaj=1.803 mas, bpa=-0.0123 degrees
! Estimated noise=0.298821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.11928e-06 Jy
! Component: 100  -  total flux cleaned = 9.90295e-05 Jy
! Component: 150  -  total flux cleaned = 0.000161781 Jy
! Component: 200  -  total flux cleaned = 0.000218138 Jy
! Total flux subtracted in 200 components = 0.000218138 Jy
! Clean residual min=-0.001539 max=0.001480 Jy/beam
! Clean residual mean=0.000003 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.239235 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 113 components and 0.239235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053575Jy  sigma=1.342233
! Fit after  self-cal, rms=0.053568Jy  sigma=1.342061
wmodel /J1638-1415_X_map.mod
! wmodel: Unable to open new model file: /J1638-1415_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1638-1415_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7128 x 1.803 at -0.0123 degrees (North through East)
! Clean map  min=-0.0015662  max=0.18018 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1638-1415_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.180177 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00032257 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.537088 0.537088 1.07418 2.14835 4.2967 8.5934 17.1868 34.3736 68.7472
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.18 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  558.568 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1638-1415_X_dfm.log closed on Fri May 20 00:13:44 2016