! Started logfile: /scr/pima/bg219a_uvs/J1635+5955_S_dfm.log on Fri May 20 00:13:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1635+5955_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1635+5955_S_uva.fits
! AN table 1: 21 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.922902 visibilities/baseline/integration-bin.
! Found source: J1635+5955
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1628 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1635+5955_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008679Jy  sigma=25.073186
! Fit after  self-cal, rms=0.913926Jy  sigma=22.730580
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.519 mas, bmaj=16.61 mas, bpa=52.11 degrees
! Estimated noise=1.16265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0681372 Jy
! Component: 100  -  total flux cleaned = 0.0834472 Jy
! Total flux subtracted in 100 components = 0.0834472 Jy
! Clean residual min=-0.006504 max=0.005999 Jy/beam
! Clean residual mean=-0.000035 rms=0.001680 Jy/beam
! Combined flux in latest and established models = 0.0834472 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0834472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053894Jy  sigma=1.258184
! Fit after  self-cal, rms=0.053878Jy  sigma=1.257816
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.046 mas, bmaj=17.06 mas, bpa=52.08 degrees
! Estimated noise=0.753392 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00591814 Jy
! Component: 100  -  total flux cleaned = 0.00808156 Jy
! Component: 150  -  total flux cleaned = 0.00899413 Jy
! Component: 200  -  total flux cleaned = 0.00951055 Jy
! Total flux subtracted in 200 components = 0.00951055 Jy
! Clean residual min=-0.002772 max=0.002742 Jy/beam
! Clean residual mean=-0.000011 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.0929578 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 29 components and 0.0929578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053276Jy  sigma=1.241084
! Fit after  self-cal, rms=0.053314Jy  sigma=1.240654
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.046 x 17.06 at 52.08 degrees (North through East)
! Clean map  min=-0.0027658  max=0.087703 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.96     MK        1.06     NL        1.03     
!   OV        1.02     PT        0.95     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     LA        0.99     MK        0.97     NL        1.03     
!   OV        0.98     PT        1.01     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        1.04     MK        1.09     NL        0.99     
!   OV        0.99     PT        1.02     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        1.02     MK        1.16     NL        0.91     
!   OV        0.97     PT        1.08     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.053314Jy  sigma=1.240654
! Fit after  self-cal, rms=0.052922Jy  sigma=1.232520
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.047 mas, bmaj=17.02 mas, bpa=51.92 degrees
! Estimated noise=0.748137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000501541 Jy
! Component: 100  -  total flux cleaned = 0.000342266 Jy
! Component: 150  -  total flux cleaned = 0.000342139 Jy
! Component: 200  -  total flux cleaned = 0.000452174 Jy
! Total flux subtracted in 200 components = 0.000452174 Jy
! Clean residual min=-0.002400 max=0.002209 Jy/beam
! Clean residual mean=-0.000010 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.09341 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 52 components and 0.09341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052847Jy  sigma=1.230727
! Fit after  self-cal, rms=0.052902Jy  sigma=1.230301
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052902Jy  sigma=1.230301
! Fit after  self-cal, rms=0.052991Jy  sigma=1.230133
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.046 mas, bmaj=17.02 mas, bpa=51.88 degrees
! Estimated noise=0.74845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162292 Jy
! Component: 100  -  total flux cleaned = 0.000242416 Jy
! Component: 150  -  total flux cleaned = 0.000288372 Jy
! Component: 200  -  total flux cleaned = 0.000327045 Jy
! Total flux subtracted in 200 components = 0.000327045 Jy
! Clean residual min=-0.002397 max=0.002289 Jy/beam
! Clean residual mean=-0.000009 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.093737 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.093737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052965Jy  sigma=1.229576
! Fit after  self-cal, rms=0.052976Jy  sigma=1.229534
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.3137e-05 Jy
! Component: 100  -  total flux cleaned = 0.000106374 Jy
! Component: 150  -  total flux cleaned = 0.000155952 Jy
! Component: 200  -  total flux cleaned = 0.000187751 Jy
! Total flux subtracted in 200 components = 0.000187751 Jy
! Clean residual min=-0.002390 max=0.002304 Jy/beam
! Clean residual mean=-0.000007 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.0939248 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 71 components and 0.0939248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052963Jy  sigma=1.229322
! Fit after  self-cal, rms=0.052966Jy  sigma=1.229310
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052966Jy  sigma=1.229310
! Fit after  self-cal, rms=0.052979Jy  sigma=1.229257
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.043 mas, bmaj=17.03 mas, bpa=51.86 degrees
! Estimated noise=0.748605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.05668e-05 Jy
! Component: 100  -  total flux cleaned = 4.0433e-05 Jy
! Component: 150  -  total flux cleaned = 5.53198e-05 Jy
! Component: 200  -  total flux cleaned = 5.52189e-05 Jy
! Total flux subtracted in 200 components = 5.52189e-05 Jy
! Clean residual min=-0.002392 max=0.002294 Jy/beam
! Clean residual mean=-0.000008 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.09398 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.09398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052968Jy  sigma=1.229049
! Fit after  self-cal, rms=0.052971Jy  sigma=1.229040
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.71816e-05 Jy
! Component: 100  -  total flux cleaned = 9.6698e-05 Jy
! Component: 150  -  total flux cleaned = 0.000111006 Jy
! Component: 200  -  total flux cleaned = 0.000138436 Jy
! Total flux subtracted in 200 components = 0.000138436 Jy
! Clean residual min=-0.002392 max=0.002295 Jy/beam
! Clean residual mean=-0.000007 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.0941184 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 76 components and 0.0941184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052962Jy  sigma=1.228902
! Fit after  self-cal, rms=0.052964Jy  sigma=1.228896
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052964Jy  sigma=1.228896
! Fit after  self-cal, rms=0.052965Jy  sigma=1.228881
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.262 mas, bmaj=16.56 mas, bpa=50.1 degrees
! Estimated noise=0.907952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202878 Jy
! Component: 100  -  total flux cleaned = 0.000301041 Jy
! Component: 150  -  total flux cleaned = 0.000368539 Jy
! Component: 200  -  total flux cleaned = 0.000425811 Jy
! Total flux subtracted in 200 components = 0.000425811 Jy
! Clean residual min=-0.001752 max=0.001985 Jy/beam
! Clean residual mean=-0.000007 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.0945442 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 90 components and 0.0945442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052962Jy  sigma=1.228778
! Fit after  self-cal, rms=0.052961Jy  sigma=1.228759
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.21859e-05 Jy
! Component: 100  -  total flux cleaned = 0.000105388 Jy
! Component: 150  -  total flux cleaned = 0.00010578 Jy
! Component: 200  -  total flux cleaned = 0.000114962 Jy
! Total flux subtracted in 200 components = 0.000114962 Jy
! Clean residual min=-0.001730 max=0.001971 Jy/beam
! Clean residual mean=-0.000005 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.0946592 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 105 components and 0.0946592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052960Jy  sigma=1.228735
! Fit after  self-cal, rms=0.052959Jy  sigma=1.228727
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.04 mas, bmaj=17.03 mas, bpa=51.86 degrees
! Estimated noise=0.748938 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.04 x 17.03 at 51.86 degrees (North through East)
! Clean map  min=-0.0025716  max=0.087445 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.523 mas, bmaj=16.57 mas, bpa=51.88 degrees
! Estimated noise=1.16207 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.067936 Jy
! Component: 100  -  total flux cleaned = 0.08359 Jy
! Component: 150  -  total flux cleaned = 0.088331 Jy
! Component: 200  -  total flux cleaned = 0.0906384 Jy
! Total flux subtracted in 200 components = 0.0906384 Jy
! Clean residual min=-0.004480 max=0.004390 Jy/beam
! Clean residual mean=-0.000012 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.0906384 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0906384 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.04 mas, bmaj=17.03 mas, bpa=51.86 degrees
! Estimated noise=0.748938 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134987 Jy
! Component: 100  -  total flux cleaned = 0.00177736 Jy
! Component: 150  -  total flux cleaned = 0.0020777 Jy
! Component: 200  -  total flux cleaned = 0.00233668 Jy
! Total flux subtracted in 200 components = 0.00233668 Jy
! Clean residual min=-0.002491 max=0.002250 Jy/beam
! Clean residual mean=-0.000018 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.0929751 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 51 components and 0.0929751 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.262 mas, bmaj=16.56 mas, bpa=50.1 degrees
! Estimated noise=0.907952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000617669 Jy
! Component: 100  -  total flux cleaned = 0.000807017 Jy
! Component: 150  -  total flux cleaned = 0.0009611 Jy
! Component: 200  -  total flux cleaned = 0.00106748 Jy
! Total flux subtracted in 200 components = 0.00106748 Jy
! Clean residual min=-0.001939 max=0.001920 Jy/beam
! Clean residual mean=-0.000016 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.0940426 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.04963e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122906 Jy
! Component: 150  -  total flux cleaned = 0.000150727 Jy
! Component: 200  -  total flux cleaned = 0.000200106 Jy
! Total flux subtracted in 200 components = 0.000200106 Jy
! Clean residual min=-0.001845 max=0.001851 Jy/beam
! Clean residual mean=-0.000011 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0942427 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 77 components and 0.0942427 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.04 mas, bmaj=17.03 mas, bpa=51.86 degrees
! Estimated noise=0.748938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145832 Jy
! Component: 100  -  total flux cleaned = 0.000168993 Jy
! Component: 150  -  total flux cleaned = 0.000233688 Jy
! Component: 200  -  total flux cleaned = 0.000273914 Jy
! Total flux subtracted in 200 components = 0.000273914 Jy
! Clean residual min=-0.002381 max=0.002217 Jy/beam
! Clean residual mean=-0.000003 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.0945166 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 98 components and 0.0945166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052970Jy  sigma=1.229138
! Fit after  self-cal, rms=0.052970Jy  sigma=1.229118
wmodel /J1635+5955_S_map.mod
! wmodel: Unable to open new model file: /J1635+5955_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1635+5955_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.04 x 17.03 at 51.86 degrees (North through East)
! Clean map  min=-0.0022533  max=0.087151 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1635+5955_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.087151 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000605812 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.08539 2.08539 4.17077 8.34154 16.6831 33.3662 66.7323
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.087 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  143.858 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1635+5955_S_dfm.log closed on Fri May 20 00:13:33 2016