! Started logfile: /scr/pima/bg219a_uvs/J1631+4927_S_uvs.log on Wed Apr  6 22:58:39 2016
obs /scr/pima/bg219a_uvs/J1631+4927_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1631+4927_S_uva.fits
! AN table 1: 36 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.67037 visibilities/baseline/integration-bin.
! Found source: J1631+4927
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1448 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J1631+4927_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042462Jy  sigma=28.043020
! Fit after  self-cal, rms=0.814072Jy  sigma=21.762596
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.585 mas, bmaj=11.58 mas, bpa=25.84 degrees
! Estimated noise=1.03997 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.143056 Jy
! Component: 100  -  total flux cleaned = 0.175244 Jy
! Total flux subtracted in 100 components = 0.175244 Jy
! Clean residual min=-0.008545 max=0.011727 Jy/beam
! Clean residual mean=0.000028 rms=0.002525 Jy/beam
! Combined flux in latest and established models = 0.175244 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.175244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050288Jy  sigma=1.272970
! Fit after  self-cal, rms=0.050274Jy  sigma=1.272610
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=11.94 mas, bpa=25.56 degrees
! Estimated noise=0.751202 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130188 Jy
! Component: 100  -  total flux cleaned = 0.0173892 Jy
! Component: 150  -  total flux cleaned = 0.0182622 Jy
! Component: 200  -  total flux cleaned = 0.0189779 Jy
! Total flux subtracted in 200 components = 0.0189779 Jy
! Clean residual min=-0.003630 max=0.004066 Jy/beam
! Clean residual mean=0.000034 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.194222 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 19 components and 0.194222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047227Jy  sigma=1.186372
! Fit after  self-cal, rms=0.047248Jy  sigma=1.186003
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.305 x 11.94 at 25.56 degrees (North through East)
! Clean map  min=-0.0033717  max=0.1872 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.05     NL        0.98     OV        1.04     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.04     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.02     MK        0.99     NL        0.97     OV        1.02     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.97     MK        0.99     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.047248Jy  sigma=1.186003
! Fit after  self-cal, rms=0.046729Jy  sigma=1.176686
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.311 mas, bmaj=11.91 mas, bpa=25.61 degrees
! Estimated noise=0.748585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000783034 Jy
! Component: 100  -  total flux cleaned = -0.00061927 Jy
! Component: 150  -  total flux cleaned = -0.000389097 Jy
! Component: 200  -  total flux cleaned = -0.000331829 Jy
! Total flux subtracted in 200 components = -0.000331829 Jy
! Clean residual min=-0.003113 max=0.003304 Jy/beam
! Clean residual mean=0.000027 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.193891 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 33 components and 0.193891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046642Jy  sigma=1.174834
! Fit after  self-cal, rms=0.046648Jy  sigma=1.174698
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046648Jy  sigma=1.174698
! Fit after  self-cal, rms=0.046364Jy  sigma=1.171152
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.306 mas, bmaj=11.92 mas, bpa=25.62 degrees
! Estimated noise=0.747322 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000587493 Jy
! Component: 100  -  total flux cleaned = 0.000616825 Jy
! Component: 150  -  total flux cleaned = 0.000662488 Jy
! Component: 200  -  total flux cleaned = 0.000743089 Jy
! Total flux subtracted in 200 components = 0.000743089 Jy
! Clean residual min=-0.002437 max=0.002657 Jy/beam
! Clean residual mean=0.000005 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.194634 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.194634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046328Jy  sigma=1.170413
! Fit after  self-cal, rms=0.046324Jy  sigma=1.170351
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.8192e-06 Jy
! Component: 100  -  total flux cleaned = 8.06021e-05 Jy
! Component: 150  -  total flux cleaned = 0.000162068 Jy
! Component: 200  -  total flux cleaned = 0.000249461 Jy
! Total flux subtracted in 200 components = 0.000249461 Jy
! Clean residual min=-0.002442 max=0.002658 Jy/beam
! Clean residual mean=0.000005 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.194883 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.194883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046310Jy  sigma=1.170091
! Fit after  self-cal, rms=0.046310Jy  sigma=1.170069
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046310Jy  sigma=1.170069
! Fit after  self-cal, rms=0.046270Jy  sigma=1.169948
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=11.91 mas, bpa=25.63 degrees
! Estimated noise=0.747106 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000398158 Jy
! Component: 100  -  total flux cleaned = 0.000505618 Jy
! Component: 150  -  total flux cleaned = 0.000578768 Jy
! Component: 200  -  total flux cleaned = 0.000603867 Jy
! Total flux subtracted in 200 components = 0.000603867 Jy
! Clean residual min=-0.002440 max=0.002557 Jy/beam
! Clean residual mean=0.000003 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.195487 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.195487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046258Jy  sigma=1.169663
! Fit after  self-cal, rms=0.046258Jy  sigma=1.169643
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.92498e-06 Jy
! Component: 100  -  total flux cleaned = 1.49019e-05 Jy
! Component: 150  -  total flux cleaned = 5.837e-05 Jy
! Component: 200  -  total flux cleaned = 8.89514e-05 Jy
! Total flux subtracted in 200 components = 8.89514e-05 Jy
! Clean residual min=-0.002457 max=0.002559 Jy/beam
! Clean residual mean=0.000003 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.195576 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.195576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046252Jy  sigma=1.169522
! Fit after  self-cal, rms=0.046253Jy  sigma=1.169507
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046253Jy  sigma=1.169507
! Fit after  self-cal, rms=0.046213Jy  sigma=1.169422
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.109 mas, bmaj=11.75 mas, bpa=25.29 degrees
! Estimated noise=0.892867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00069442 Jy
! Component: 100  -  total flux cleaned = 0.000857445 Jy
! Component: 150  -  total flux cleaned = 0.000930629 Jy
! Component: 200  -  total flux cleaned = 0.000993469 Jy
! Total flux subtracted in 200 components = 0.000993469 Jy
! Clean residual min=-0.001870 max=0.002259 Jy/beam
! Clean residual mean=0.000003 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.196569 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 75 components and 0.196569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046207Jy  sigma=1.169303
! Fit after  self-cal, rms=0.046207Jy  sigma=1.169282
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.19165e-05 Jy
! Component: 100  -  total flux cleaned = 9.79428e-05 Jy
! Component: 150  -  total flux cleaned = 0.000132414 Jy
! Component: 200  -  total flux cleaned = 0.000165208 Jy
! Total flux subtracted in 200 components = 0.000165208 Jy
! Clean residual min=-0.001852 max=0.002223 Jy/beam
! Clean residual mean=0.000002 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.196735 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 85 components and 0.196735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046205Jy  sigma=1.169238
! Fit after  self-cal, rms=0.046205Jy  sigma=1.169228
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=11.9 mas, bpa=25.64 degrees
! Estimated noise=0.746788 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.305 x 11.9 at 25.64 degrees (North through East)
! Clean map  min=-0.004656  max=0.18677 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.588 mas, bmaj=11.56 mas, bpa=25.87 degrees
! Estimated noise=1.03008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141634 Jy
! Component: 100  -  total flux cleaned = 0.173627 Jy
! Component: 150  -  total flux cleaned = 0.185371 Jy
! Component: 200  -  total flux cleaned = 0.189092 Jy
! Total flux subtracted in 200 components = 0.189092 Jy
! Clean residual min=-0.005993 max=0.004987 Jy/beam
! Clean residual mean=0.000006 rms=0.001387 Jy/beam
! Combined flux in latest and established models = 0.189092 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.189092 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=11.9 mas, bpa=25.64 degrees
! Estimated noise=0.746788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278171 Jy
! Component: 100  -  total flux cleaned = 0.00345287 Jy
! Component: 150  -  total flux cleaned = 0.00417949 Jy
! Component: 200  -  total flux cleaned = 0.00477041 Jy
! Total flux subtracted in 200 components = 0.00477041 Jy
! Clean residual min=-0.002468 max=0.002606 Jy/beam
! Clean residual mean=0.000006 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.193862 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.193862 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.109 mas, bmaj=11.75 mas, bpa=25.29 degrees
! Estimated noise=0.892867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145874 Jy
! Component: 100  -  total flux cleaned = 0.00195101 Jy
! Component: 150  -  total flux cleaned = 0.00216892 Jy
! Component: 200  -  total flux cleaned = 0.00231799 Jy
! Total flux subtracted in 200 components = 0.00231799 Jy
! Clean residual min=-0.001935 max=0.002398 Jy/beam
! Clean residual mean=0.000004 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.19618 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.2703e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133306 Jy
! Component: 150  -  total flux cleaned = 0.000184747 Jy
! Component: 200  -  total flux cleaned = 0.000232515 Jy
! Total flux subtracted in 200 components = 0.000232515 Jy
! Clean residual min=-0.001895 max=0.002384 Jy/beam
! Clean residual mean=0.000003 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.196413 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 52 components and 0.196413 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=11.9 mas, bpa=25.64 degrees
! Estimated noise=0.746788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014158 Jy
! Component: 100  -  total flux cleaned = 0.000264901 Jy
! Component: 150  -  total flux cleaned = 0.000292276 Jy
! Component: 200  -  total flux cleaned = 0.000292402 Jy
! Total flux subtracted in 200 components = 0.000292402 Jy
! Clean residual min=-0.002388 max=0.002566 Jy/beam
! Clean residual mean=0.000001 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.196705 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.196705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046251Jy  sigma=1.169960
! Fit after  self-cal, rms=0.046247Jy  sigma=1.169783
wmodel /scr/pima/bg219a_uvs/J1631+4927_S_map.mod
! Writing 63 model components to file: /scr/pima/bg219a_uvs/J1631+4927_S_map.mod
wobs /scr/pima/bg219a_uvs/J1631+4927_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J1631+4927_S_uvs.fits
wwins /scr/pima/bg219a_uvs/J1631+4927_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J1631+4927_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00060367 Jy
! Component: 100  -  total flux cleaned = 0.000936635 Jy
! Component: 150  -  total flux cleaned = 0.00124999 Jy
! Component: 200  -  total flux cleaned = 0.00136153 Jy
! Component: 250  -  total flux cleaned = 0.00150337 Jy
! Component: 300  -  total flux cleaned = 0.0015711 Jy
! Component: 350  -  total flux cleaned = 0.00163678 Jy
! Component: 400  -  total flux cleaned = 0.00170038 Jy
! Component: 450  -  total flux cleaned = 0.00170052 Jy
! Component: 500  -  total flux cleaned = 0.00175922 Jy
! Component: 550  -  total flux cleaned = 0.00178685 Jy
! Component: 600  -  total flux cleaned = 0.00184202 Jy
! Component: 650  -  total flux cleaned = 0.00194958 Jy
! Component: 700  -  total flux cleaned = 0.00202791 Jy
! Component: 750  -  total flux cleaned = 0.00213026 Jy
! Component: 800  -  total flux cleaned = 0.00213022 Jy
! Component: 850  -  total flux cleaned = 0.0021305 Jy
! Component: 900  -  total flux cleaned = 0.00210598 Jy
! Component: 950  -  total flux cleaned = 0.00205835 Jy
! Component: 1000  -  total flux cleaned = 0.00198853 Jy
! Component: 1050  -  total flux cleaned = 0.00201137 Jy
! Component: 1100  -  total flux cleaned = 0.00198895 Jy
! Component: 1150  -  total flux cleaned = 0.00205592 Jy
! Component: 1200  -  total flux cleaned = 0.00209974 Jy
! Component: 1250  -  total flux cleaned = 0.00212117 Jy
! Component: 1300  -  total flux cleaned = 0.00216382 Jy
! Component: 1350  -  total flux cleaned = 0.00224829 Jy
! Component: 1400  -  total flux cleaned = 0.00226922 Jy
! Component: 1450  -  total flux cleaned = 0.00231077 Jy
! Component: 1500  -  total flux cleaned = 0.00237183 Jy
! Component: 1550  -  total flux cleaned = 0.00239194 Jy
! Component: 1600  -  total flux cleaned = 0.00239184 Jy
! Component: 1650  -  total flux cleaned = 0.00247103 Jy
! Component: 1700  -  total flux cleaned = 0.0025298 Jy
! Component: 1750  -  total flux cleaned = 0.00260755 Jy
! Component: 1800  -  total flux cleaned = 0.00268437 Jy
! Component: 1850  -  total flux cleaned = 0.00279876 Jy
! Component: 1900  -  total flux cleaned = 0.0028931 Jy
! Component: 1950  -  total flux cleaned = 0.00294944 Jy
! Component: 2000  -  total flux cleaned = 0.0030426 Jy
! Component: 2050  -  total flux cleaned = 0.00309822 Jy
! Component: 2100  -  total flux cleaned = 0.00320823 Jy
! Component: 2150  -  total flux cleaned = 0.00329938 Jy
! Component: 2200  -  total flux cleaned = 0.00335372 Jy
! Component: 2250  -  total flux cleaned = 0.00349761 Jy
! Component: 2300  -  total flux cleaned = 0.00362265 Jy
! Component: 2350  -  total flux cleaned = 0.00372917 Jy
! Component: 2400  -  total flux cleaned = 0.00379988 Jy
! Component: 2450  -  total flux cleaned = 0.00390563 Jy
! Component: 2500  -  total flux cleaned = 0.00399337 Jy
! Component: 2550  -  total flux cleaned = 0.00409812 Jy
! Component: 2600  -  total flux cleaned = 0.00420252 Jy
! Component: 2650  -  total flux cleaned = 0.00430651 Jy
! Component: 2700  -  total flux cleaned = 0.00439304 Jy
! Component: 2750  -  total flux cleaned = 0.00446205 Jy
! Component: 2800  -  total flux cleaned = 0.00454813 Jy
! Component: 2850  -  total flux cleaned = 0.00463404 Jy
! Component: 2900  -  total flux cleaned = 0.00473703 Jy
! Component: 2950  -  total flux cleaned = 0.00478839 Jy
! Component: 3000  -  total flux cleaned = 0.00483972 Jy
! Component: 3050  -  total flux cleaned = 0.00494235 Jy
! Component: 3100  -  total flux cleaned = 0.00497657 Jy
! Component: 3150  -  total flux cleaned = 0.00502794 Jy
! Component: 3200  -  total flux cleaned = 0.00509615 Jy
! Component: 3250  -  total flux cleaned = 0.00516453 Jy
! Component: 3300  -  total flux cleaned = 0.00521578 Jy
! Component: 3350  -  total flux cleaned = 0.00526706 Jy
! Component: 3400  -  total flux cleaned = 0.00535247 Jy
! Component: 3450  -  total flux cleaned = 0.00540372 Jy
! Component: 3500  -  total flux cleaned = 0.00545505 Jy
! Component: 3550  -  total flux cleaned = 0.00552356 Jy
! Component: 3600  -  total flux cleaned = 0.00557508 Jy
! Component: 3650  -  total flux cleaned = 0.00560937 Jy
! Component: 3700  -  total flux cleaned = 0.00566099 Jy
! Component: 3750  -  total flux cleaned = 0.00572985 Jy
! Component: 3800  -  total flux cleaned = 0.00579902 Jy
! Component: 3850  -  total flux cleaned = 0.00586851 Jy
! Component: 3900  -  total flux cleaned = 0.00590342 Jy
! Component: 3950  -  total flux cleaned = 0.00595604 Jy
! Component: 4000  -  total flux cleaned = 0.00599133 Jy
! Component: 4050  -  total flux cleaned = 0.00604444 Jy
! Total flux subtracted in 4096 components = 0.00609788 Jy
! Clean residual min=-0.000909 max=0.001221 Jy/beam
! Clean residual mean=0.000005 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.202803 Jy
keep
! Adding 199 model components to the UV plane model.
! The established model now contains 262 components and 0.202803 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J1631+4927_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.305 x 11.9 at 25.64 degrees (North through East)
! Clean map  min=-0.0039061  max=0.18634 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1631+4927_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.186338 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000310111 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.499272 0.499272 0.998545 1.99709 3.99418 7.98836 15.9767 31.9534 63.9069
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.186 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  600.874 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1631+4927_S_uvs.log closed on Wed Apr  6 22:58:43 2016