! Started logfile: /scr/pima/bg219a_uvs/J1624+5652_S_uvs.log on Wed Apr  6 22:58:35 2016
obs /scr/pima/bg219a_uvs/J1624+5652_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1624+5652_S_uva.fits
! AN table 1: 21 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.938776 visibilities/baseline/integration-bin.
! Found source: J1624+5652
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1656 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J1624+5652_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036946Jy  sigma=25.319369
! Fit after  self-cal, rms=0.806022Jy  sigma=19.221587
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.524 mas, bmaj=17.01 mas, bpa=48.86 degrees
! Estimated noise=1.04986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141064 Jy
! Component: 100  -  total flux cleaned = 0.191898 Jy
! Total flux subtracted in 100 components = 0.191898 Jy
! Clean residual min=-0.013803 max=0.024236 Jy/beam
! Clean residual mean=-0.000259 rms=0.004736 Jy/beam
! Combined flux in latest and established models = 0.191898 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.191898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072149Jy  sigma=1.761735
! Fit after  self-cal, rms=0.072069Jy  sigma=1.758264
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.167 mas, bmaj=16.9 mas, bpa=48.55 degrees
! Estimated noise=0.753734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0377227 Jy
! Component: 100  -  total flux cleaned = 0.0547947 Jy
! Component: 150  -  total flux cleaned = 0.063678 Jy
! Component: 200  -  total flux cleaned = 0.0690767 Jy
! Total flux subtracted in 200 components = 0.0690767 Jy
! Clean residual min=-0.004537 max=0.004584 Jy/beam
! Clean residual mean=-0.000126 rms=0.001270 Jy/beam
! Combined flux in latest and established models = 0.260975 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 49 components and 0.260975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053543Jy  sigma=1.222406
! Fit after  self-cal, rms=0.053458Jy  sigma=1.219181
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.167 x 16.9 at 48.55 degrees (North through East)
! Clean map  min=-0.0044551  max=0.20042 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        1.07     NL        0.99     
!   OV        1.01     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.97     MK        0.98     NL        1.04     
!   OV        0.98     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.96     MK        1.05     NL        1.00     
!   OV        0.99     PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        0.99     MK        1.03     NL        0.99     
!   OV        0.94     PT        0.96     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.053458Jy  sigma=1.219181
! Fit after  self-cal, rms=0.052641Jy  sigma=1.201082
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.184 mas, bmaj=17 mas, bpa=48.5 degrees
! Estimated noise=0.746501 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000348854 Jy
! Component: 100  -  total flux cleaned = -0.000817783 Jy
! Component: 150  -  total flux cleaned = -0.000903759 Jy
! Component: 200  -  total flux cleaned = -0.000870478 Jy
! Total flux subtracted in 200 components = -0.000870478 Jy
! Clean residual min=-0.003348 max=0.002515 Jy/beam
! Clean residual mean=-0.000001 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.260104 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 82 components and 0.260104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052543Jy  sigma=1.198920
! Fit after  self-cal, rms=0.052550Jy  sigma=1.198589
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052550Jy  sigma=1.198589
! Fit after  self-cal, rms=0.052469Jy  sigma=1.198527
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.183 mas, bmaj=17 mas, bpa=48.5 degrees
! Estimated noise=0.745686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176872 Jy
! Component: 100  -  total flux cleaned = -0.000281419 Jy
! Component: 150  -  total flux cleaned = -0.000198946 Jy
! Component: 200  -  total flux cleaned = -0.00017408 Jy
! Total flux subtracted in 200 components = -0.00017408 Jy
! Clean residual min=-0.003237 max=0.002488 Jy/beam
! Clean residual mean=0.000002 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.25993 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 93 components and 0.25993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052429Jy  sigma=1.197762
! Fit after  self-cal, rms=0.052426Jy  sigma=1.197683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.76193e-06 Jy
! Component: 100  -  total flux cleaned = 4.19811e-05 Jy
! Component: 150  -  total flux cleaned = 6.30176e-05 Jy
! Component: 200  -  total flux cleaned = 8.21687e-05 Jy
! Total flux subtracted in 200 components = 8.21687e-05 Jy
! Clean residual min=-0.003175 max=0.002511 Jy/beam
! Clean residual mean=0.000003 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.260012 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 0.260012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052406Jy  sigma=1.197281
! Fit after  self-cal, rms=0.052405Jy  sigma=1.197251
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052405Jy  sigma=1.197251
! Fit after  self-cal, rms=0.052364Jy  sigma=1.197220
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.182 mas, bmaj=17 mas, bpa=48.5 degrees
! Estimated noise=0.745216 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.19187e-05 Jy
! Component: 100  -  total flux cleaned = -7.14107e-05 Jy
! Component: 150  -  total flux cleaned = -8.9753e-05 Jy
! Component: 200  -  total flux cleaned = -8.9934e-05 Jy
! Total flux subtracted in 200 components = -8.9934e-05 Jy
! Clean residual min=-0.003147 max=0.002495 Jy/beam
! Clean residual mean=0.000005 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.259922 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 109 components and 0.259922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052349Jy  sigma=1.196971
! Fit after  self-cal, rms=0.052350Jy  sigma=1.196961
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.20748e-07 Jy
! Component: 100  -  total flux cleaned = 1.63756e-05 Jy
! Component: 150  -  total flux cleaned = 1.59453e-05 Jy
! Component: 200  -  total flux cleaned = 1.54681e-05 Jy
! Total flux subtracted in 200 components = 1.54681e-05 Jy
! Clean residual min=-0.003125 max=0.002508 Jy/beam
! Clean residual mean=0.000005 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.259938 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 116 components and 0.259938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052340Jy  sigma=1.196786
! Fit after  self-cal, rms=0.052340Jy  sigma=1.196783
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052340Jy  sigma=1.196783
! Fit after  self-cal, rms=0.052307Jy  sigma=1.196766
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.262 mas, bmaj=16.26 mas, bpa=46.15 degrees
! Estimated noise=0.896197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122667 Jy
! Component: 100  -  total flux cleaned = 0.000108605 Jy
! Component: 150  -  total flux cleaned = 8.56319e-05 Jy
! Component: 200  -  total flux cleaned = 8.57541e-05 Jy
! Total flux subtracted in 200 components = 8.57541e-05 Jy
! Clean residual min=-0.001823 max=0.001916 Jy/beam
! Clean residual mean=0.000015 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.260024 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 132 components and 0.260024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052304Jy  sigma=1.196682
! Fit after  self-cal, rms=0.052305Jy  sigma=1.196666
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.13002e-06 Jy
! Component: 100  -  total flux cleaned = -2.63842e-05 Jy
! Component: 150  -  total flux cleaned = -2.61024e-05 Jy
! Component: 200  -  total flux cleaned = -9.50736e-06 Jy
! Total flux subtracted in 200 components = -9.50736e-06 Jy
! Clean residual min=-0.001831 max=0.001909 Jy/beam
! Clean residual mean=0.000015 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.260014 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 139 components and 0.260014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052303Jy  sigma=1.196630
! Fit after  self-cal, rms=0.052304Jy  sigma=1.196623
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.181 mas, bmaj=17 mas, bpa=48.5 degrees
! Estimated noise=0.744861 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.181 x 17 at 48.5 degrees (North through East)
! Clean map  min=-0.0028991  max=0.19865 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.535 mas, bmaj=17.08 mas, bpa=48.8 degrees
! Estimated noise=1.04277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13987 Jy
! Component: 100  -  total flux cleaned = 0.190731 Jy
! Component: 150  -  total flux cleaned = 0.217991 Jy
! Component: 200  -  total flux cleaned = 0.233042 Jy
! Total flux subtracted in 200 components = 0.233042 Jy
! Clean residual min=-0.006733 max=0.008807 Jy/beam
! Clean residual mean=-0.000087 rms=0.001997 Jy/beam
! Combined flux in latest and established models = 0.233043 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.233043 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.181 mas, bmaj=17 mas, bpa=48.5 degrees
! Estimated noise=0.744861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131206 Jy
! Component: 100  -  total flux cleaned = 0.0198258 Jy
! Component: 150  -  total flux cleaned = 0.0234047 Jy
! Component: 200  -  total flux cleaned = 0.0244142 Jy
! Total flux subtracted in 200 components = 0.0244142 Jy
! Clean residual min=-0.003692 max=0.002676 Jy/beam
! Clean residual mean=-0.000019 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.257457 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 45 components and 0.257457 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.262 mas, bmaj=16.26 mas, bpa=46.15 degrees
! Estimated noise=0.896197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198415 Jy
! Component: 100  -  total flux cleaned = 0.00246418 Jy
! Component: 150  -  total flux cleaned = 0.00282646 Jy
! Component: 200  -  total flux cleaned = 0.0028921 Jy
! Total flux subtracted in 200 components = 0.0028921 Jy
! Clean residual min=-0.002125 max=0.001981 Jy/beam
! Clean residual mean=0.000016 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.260349 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.43817e-05 Jy
! Component: 100  -  total flux cleaned = 7.7783e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100323 Jy
! Component: 200  -  total flux cleaned = 0.000138594 Jy
! Total flux subtracted in 200 components = 0.000138594 Jy
! Clean residual min=-0.001978 max=0.001951 Jy/beam
! Clean residual mean=0.000019 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.260487 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 83 components and 0.260487 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.181 mas, bmaj=17 mas, bpa=48.5 degrees
! Estimated noise=0.744861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000402187 Jy
! Component: 100  -  total flux cleaned = -0.000402509 Jy
! Component: 150  -  total flux cleaned = -0.000265807 Jy
! Component: 200  -  total flux cleaned = -0.000164859 Jy
! Total flux subtracted in 200 components = -0.000164859 Jy
! Clean residual min=-0.003052 max=0.002525 Jy/beam
! Clean residual mean=0.000008 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.260322 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 112 components and 0.260323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052309Jy  sigma=1.196760
! Fit after  self-cal, rms=0.052306Jy  sigma=1.196742
wmodel /scr/pima/bg219a_uvs/J1624+5652_S_map.mod
! Writing 112 model components to file: /scr/pima/bg219a_uvs/J1624+5652_S_map.mod
wobs /scr/pima/bg219a_uvs/J1624+5652_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219a_uvs/J1624+5652_S_uvs.fits
wwins /scr/pima/bg219a_uvs/J1624+5652_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219a_uvs/J1624+5652_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000794834 Jy
! Component: 100  -  total flux cleaned = -0.000882707 Jy
! Component: 150  -  total flux cleaned = -0.000761264 Jy
! Component: 200  -  total flux cleaned = -0.000489762 Jy
! Component: 250  -  total flux cleaned = -0.000269519 Jy
! Component: 300  -  total flux cleaned = -5.80735e-05 Jy
! Component: 350  -  total flux cleaned = 0.000109948 Jy
! Component: 400  -  total flux cleaned = 0.000174312 Jy
! Component: 450  -  total flux cleaned = 0.000237434 Jy
! Component: 500  -  total flux cleaned = 0.00029795 Jy
! Component: 550  -  total flux cleaned = 0.000267651 Jy
! Component: 600  -  total flux cleaned = 0.000209584 Jy
! Component: 650  -  total flux cleaned = 0.000182299 Jy
! Component: 700  -  total flux cleaned = 0.000237753 Jy
! Component: 750  -  total flux cleaned = 0.000237322 Jy
! Component: 800  -  total flux cleaned = 0.000262906 Jy
! Component: 850  -  total flux cleaned = 0.000211158 Jy
! Component: 900  -  total flux cleaned = 0.000211359 Jy
! Component: 950  -  total flux cleaned = 0.00023577 Jy
! Component: 1000  -  total flux cleaned = 0.000235932 Jy
! Component: 1050  -  total flux cleaned = 0.00028325 Jy
! Component: 1100  -  total flux cleaned = 0.000305891 Jy
! Component: 1150  -  total flux cleaned = 0.000260457 Jy
! Component: 1200  -  total flux cleaned = 0.000238528 Jy
! Component: 1250  -  total flux cleaned = 0.000238845 Jy
! Component: 1300  -  total flux cleaned = 0.000195916 Jy
! Component: 1350  -  total flux cleaned = 0.000111355 Jy
! Component: 1400  -  total flux cleaned = 0.000111129 Jy
! Component: 1450  -  total flux cleaned = 2.89203e-05 Jy
! Component: 1500  -  total flux cleaned = -5.19567e-05 Jy
! Component: 1550  -  total flux cleaned = -0.000111385 Jy
! Component: 1600  -  total flux cleaned = -0.000111331 Jy
! Component: 1650  -  total flux cleaned = -0.00013102 Jy
! Component: 1700  -  total flux cleaned = -0.00018832 Jy
! Component: 1750  -  total flux cleaned = -0.000225783 Jy
! Component: 1800  -  total flux cleaned = -0.000262792 Jy
! Component: 1850  -  total flux cleaned = -0.00028101 Jy
! Component: 1900  -  total flux cleaned = -0.000262763 Jy
! Component: 1950  -  total flux cleaned = -0.000262621 Jy
! Component: 2000  -  total flux cleaned = -0.000244741 Jy
! Component: 2050  -  total flux cleaned = -0.000209374 Jy
! Component: 2100  -  total flux cleaned = -0.000174498 Jy
! Component: 2150  -  total flux cleaned = -0.000191984 Jy
! Component: 2200  -  total flux cleaned = -0.000157479 Jy
! Component: 2250  -  total flux cleaned = -0.000157647 Jy
! Component: 2300  -  total flux cleaned = -0.000123835 Jy
! Component: 2350  -  total flux cleaned = -0.000123813 Jy
! Component: 2400  -  total flux cleaned = -7.38216e-05 Jy
! Component: 2450  -  total flux cleaned = -5.72551e-05 Jy
! Component: 2500  -  total flux cleaned = -2.43646e-05 Jy
! Component: 2550  -  total flux cleaned = -8.10216e-06 Jy
! Component: 2600  -  total flux cleaned = -7.97444e-06 Jy
! Component: 2650  -  total flux cleaned = 5.64234e-05 Jy
! Component: 2700  -  total flux cleaned = 4.04059e-05 Jy
! Component: 2750  -  total flux cleaned = 8.81406e-05 Jy
! Component: 2800  -  total flux cleaned = 0.000104103 Jy
! Component: 2850  -  total flux cleaned = 0.000166865 Jy
! Component: 2900  -  total flux cleaned = 0.000229369 Jy
! Component: 2950  -  total flux cleaned = 0.000307218 Jy
! Component: 3000  -  total flux cleaned = 0.000384743 Jy
! Component: 3050  -  total flux cleaned = 0.000461964 Jy
! Component: 3100  -  total flux cleaned = 0.000538898 Jy
! Component: 3150  -  total flux cleaned = 0.000615575 Jy
! Component: 3200  -  total flux cleaned = 0.000737914 Jy
! Component: 3250  -  total flux cleaned = 0.000783586 Jy
! Component: 3300  -  total flux cleaned = 0.000874865 Jy
! Component: 3350  -  total flux cleaned = 0.000935538 Jy
! Component: 3400  -  total flux cleaned = 0.000965864 Jy
! Component: 3450  -  total flux cleaned = 0.00102637 Jy
! Component: 3500  -  total flux cleaned = 0.00104149 Jy
! Component: 3550  -  total flux cleaned = 0.00107169 Jy
! Component: 3600  -  total flux cleaned = 0.00114724 Jy
! Component: 3650  -  total flux cleaned = 0.00116227 Jy
! Component: 3700  -  total flux cleaned = 0.00119242 Jy
! Component: 3750  -  total flux cleaned = 0.00122267 Jy
! Component: 3800  -  total flux cleaned = 0.00123773 Jy
! Component: 3850  -  total flux cleaned = 0.00126788 Jy
! Component: 3900  -  total flux cleaned = 0.0013286 Jy
! Component: 3950  -  total flux cleaned = 0.00129822 Jy
! Component: 4000  -  total flux cleaned = 0.00135906 Jy
! Component: 4050  -  total flux cleaned = 0.00134382 Jy
! Total flux subtracted in 4096 components = 0.00135906 Jy
! Clean residual min=-0.000925 max=0.001160 Jy/beam
! Clean residual mean=-0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.261682 Jy
keep
! Adding 263 model components to the UV plane model.
! The established model now contains 375 components and 0.261682 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219a_uvs/J1624+5652_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.181 x 17 at 48.5 degrees (North through East)
! Clean map  min=-0.002194  max=0.19836 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1624+5652_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.198356 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000282478 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.427228 0.427228 0.854456 1.70891 3.41782 6.83565 13.6713 27.3426 54.6852
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.198 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  702.201 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1624+5652_S_uvs.log closed on Wed Apr  6 22:58:39 2016