! Started logfile: /scr/pima/bg219a_uvs/J1608+5613_S_uvs.log on Wed Apr 6 22:58:30 2016 obs /scr/pima/bg219a_uvs/J1608+5613_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219a_uvs/J1608+5613_S_uva.fits ! AN table 1: 28 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.882653 visibilities/baseline/integration-bin. ! Found source: J1608+5613 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 49 lines of history. ! ! Reading 2076 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219a_uvs/J1608+5613_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.019926Jy sigma=25.697480 ! Fit after self-cal, rms=0.834965Jy sigma=20.770435 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=16.65 mas, bpa=44.75 degrees ! Estimated noise=0.947041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12329 Jy ! Component: 100 - total flux cleaned = 0.156906 Jy ! Total flux subtracted in 100 components = 0.156906 Jy ! Clean residual min=-0.009805 max=0.016277 Jy/beam ! Clean residual mean=-0.000154 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 0.156906 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.156906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060163Jy sigma=1.491379 ! Fit after self-cal, rms=0.060182Jy sigma=1.490963 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=16.84 mas, bpa=44.3 degrees ! Estimated noise=0.632543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250491 Jy ! Component: 100 - total flux cleaned = 0.0364075 Jy ! Component: 150 - total flux cleaned = 0.0418455 Jy ! Component: 200 - total flux cleaned = 0.0439716 Jy ! Total flux subtracted in 200 components = 0.0439716 Jy ! Clean residual min=-0.003373 max=0.004773 Jy/beam ! Clean residual mean=-0.000065 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.200877 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.200877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051057Jy sigma=1.216931 ! Fit after self-cal, rms=0.051080Jy sigma=1.216071 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.417 x 16.84 at 44.3 degrees (North through East) ! Clean map min=-0.0031976 max=0.16889 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 LA 0.99 MK 1.02 NL 0.98 ! OV 1.03 PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 LA 0.99 MK 1.02 NL 1.02 ! OV 1.01 PT 0.97 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 LA 0.98 MK 1.04 NL 0.98 ! OV 1.01 PT 0.98 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 LA 0.99 MK 0.99 NL 0.95 ! OV 0.95 PT 0.96 SC 0.95 ! ! ! Fit before self-cal, rms=0.051080Jy sigma=1.216071 ! Fit after self-cal, rms=0.050323Jy sigma=1.202316 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=16.88 mas, bpa=44.23 degrees ! Estimated noise=0.627365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242 Jy ! Component: 100 - total flux cleaned = 0.000312318 Jy ! Component: 150 - total flux cleaned = 0.000273298 Jy ! Component: 200 - total flux cleaned = 0.000202309 Jy ! Total flux subtracted in 200 components = 0.000202309 Jy ! Clean residual min=-0.002506 max=0.002892 Jy/beam ! Clean residual mean=-0.000007 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.20108 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.20108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050208Jy sigma=1.199855 ! Fit after self-cal, rms=0.050218Jy sigma=1.199661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050218Jy sigma=1.199661 ! Fit after self-cal, rms=0.050128Jy sigma=1.199413 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.416 mas, bmaj=16.89 mas, bpa=44.22 degrees ! Estimated noise=0.62692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123669 Jy ! Component: 100 - total flux cleaned = 0.000218142 Jy ! Component: 150 - total flux cleaned = 0.000245101 Jy ! Component: 200 - total flux cleaned = 0.000318772 Jy ! Total flux subtracted in 200 components = 0.000318772 Jy ! Clean residual min=-0.002561 max=0.002777 Jy/beam ! Clean residual mean=-0.000007 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.201398 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 60 components and 0.201398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050087Jy sigma=1.198589 ! Fit after self-cal, rms=0.050085Jy sigma=1.198558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (58, -108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908532 Jy ! Component: 100 - total flux cleaned = 0.00075699 Jy ! Component: 150 - total flux cleaned = 0.000699669 Jy ! Component: 200 - total flux cleaned = 0.000745621 Jy ! Total flux subtracted in 200 components = 0.000745621 Jy ! Clean residual min=-0.001641 max=0.001734 Jy/beam ! Clean residual mean=-0.000009 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.202144 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 96 components and 0.202144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049870Jy sigma=1.194187 ! Fit after self-cal, rms=0.049859Jy sigma=1.193932 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049859Jy sigma=1.193932 ! Fit after self-cal, rms=0.049780Jy sigma=1.193710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.414 mas, bmaj=16.91 mas, bpa=44.22 degrees ! Estimated noise=0.626161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.02689e-05 Jy ! Component: 100 - total flux cleaned = -7.2767e-06 Jy ! Component: 150 - total flux cleaned = -3.54329e-05 Jy ! Component: 200 - total flux cleaned = -0.000121151 Jy ! Total flux subtracted in 200 components = -0.000121151 Jy ! Clean residual min=-0.001586 max=0.001639 Jy/beam ! Clean residual mean=-0.000004 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.202023 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 112 components and 0.202023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049726Jy sigma=1.192730 ! Fit after self-cal, rms=0.049725Jy sigma=1.192684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000484058 Jy ! Component: 100 - total flux cleaned = -0.000430185 Jy ! Component: 150 - total flux cleaned = -0.000482565 Jy ! Component: 200 - total flux cleaned = -0.000507877 Jy ! Total flux subtracted in 200 components = -0.000507877 Jy ! Clean residual min=-0.001523 max=0.001590 Jy/beam ! Clean residual mean=-0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.201515 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 127 components and 0.201515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049697Jy sigma=1.192142 ! Fit after self-cal, rms=0.049696Jy sigma=1.192124 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049696Jy sigma=1.192124 ! Fit after self-cal, rms=0.049662Jy sigma=1.192082 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.242 mas, bmaj=16.05 mas, bpa=41.22 degrees ! Estimated noise=0.74839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000625914 Jy ! Component: 100 - total flux cleaned = -0.000861965 Jy ! Component: 150 - total flux cleaned = -0.000990704 Jy ! Component: 200 - total flux cleaned = -0.00107061 Jy ! Total flux subtracted in 200 components = -0.00107061 Jy ! Clean residual min=-0.001222 max=0.001030 Jy/beam ! Clean residual mean=0.000001 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.200444 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 147 components and 0.200444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049656Jy sigma=1.191770 ! Fit after self-cal, rms=0.049654Jy sigma=1.191750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000440684 Jy ! Component: 100 - total flux cleaned = -0.0006183 Jy ! Component: 150 - total flux cleaned = -0.000740293 Jy ! Component: 200 - total flux cleaned = -0.000777809 Jy ! Total flux subtracted in 200 components = -0.000777809 Jy ! Clean residual min=-0.001119 max=0.000960 Jy/beam ! Clean residual mean=0.000002 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.199667 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 171 components and 0.199667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049649Jy sigma=1.191574 ! Fit after self-cal, rms=0.049649Jy sigma=1.191565 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=16.92 mas, bpa=44.22 degrees ! Estimated noise=0.62597 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 16.92 at 44.22 degrees (North through East) ! Clean map min=-0.002409 max=0.16737 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=16.76 mas, bpa=44.69 degrees ! Estimated noise=0.933157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121416 Jy ! Component: 100 - total flux cleaned = 0.155197 Jy ! Component: 150 - total flux cleaned = 0.174348 Jy ! Component: 200 - total flux cleaned = 0.185547 Jy ! Total flux subtracted in 200 components = 0.185547 Jy ! Clean residual min=-0.005756 max=0.006386 Jy/beam ! Clean residual mean=-0.000049 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.185547 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.185547 Jy ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=16.92 mas, bpa=44.22 degrees ! Estimated noise=0.62597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856081 Jy ! Component: 100 - total flux cleaned = 0.0128101 Jy ! Component: 150 - total flux cleaned = 0.0130853 Jy ! Component: 200 - total flux cleaned = 0.0127919 Jy ! Total flux subtracted in 200 components = 0.0127919 Jy ! Clean residual min=-0.002583 max=0.002257 Jy/beam ! Clean residual mean=-0.000019 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.198338 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.198338 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.242 mas, bmaj=16.05 mas, bpa=41.22 degrees ! Estimated noise=0.74839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.70643e-05 Jy ! Component: 100 - total flux cleaned = -0.000337112 Jy ! Component: 150 - total flux cleaned = -0.000997621 Jy ! Component: 200 - total flux cleaned = -0.0012353 Jy ! Total flux subtracted in 200 components = -0.0012353 Jy ! Clean residual min=-0.001302 max=0.001507 Jy/beam ! Clean residual mean=-0.000006 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.197103 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0002394 Jy ! Component: 100 - total flux cleaned = -0.000448363 Jy ! Component: 150 - total flux cleaned = -0.000571008 Jy ! Component: 200 - total flux cleaned = -0.000657271 Jy ! Total flux subtracted in 200 components = -0.000657271 Jy ! Clean residual min=-0.001116 max=0.001253 Jy/beam ! Clean residual mean=-0.000002 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.196446 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 103 components and 0.196446 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=16.92 mas, bpa=44.22 degrees ! Estimated noise=0.62597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257206 Jy ! Component: 100 - total flux cleaned = -0.000160597 Jy ! Component: 150 - total flux cleaned = -2.61225e-05 Jy ! Component: 200 - total flux cleaned = 0.000136307 Jy ! Total flux subtracted in 200 components = 0.000136307 Jy ! Clean residual min=-0.001717 max=0.001540 Jy/beam ! Clean residual mean=0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.196582 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 140 components and 0.196582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049736Jy sigma=1.193094 ! Fit after self-cal, rms=0.049729Jy sigma=1.193032 wmodel /scr/pima/bg219a_uvs/J1608+5613_S_map.mod ! Writing 140 model components to file: /scr/pima/bg219a_uvs/J1608+5613_S_map.mod wobs /scr/pima/bg219a_uvs/J1608+5613_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219a_uvs/J1608+5613_S_uvs.fits wwins /scr/pima/bg219a_uvs/J1608+5613_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219a_uvs/J1608+5613_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000718889 Jy ! Component: 100 - total flux cleaned = -0.000799093 Jy ! Component: 150 - total flux cleaned = -0.000723116 Jy ! Component: 200 - total flux cleaned = -0.000628409 Jy ! Component: 250 - total flux cleaned = -0.000490138 Jy ! Component: 300 - total flux cleaned = -0.000357254 Jy ! Component: 350 - total flux cleaned = -0.000293112 Jy ! Component: 400 - total flux cleaned = -8.5684e-05 Jy ! Component: 450 - total flux cleaned = 5.49514e-05 Jy ! Component: 500 - total flux cleaned = 0.000192153 Jy ! Component: 550 - total flux cleaned = 0.000249617 Jy ! Component: 600 - total flux cleaned = 0.000361995 Jy ! Component: 650 - total flux cleaned = 0.000453452 Jy ! Component: 700 - total flux cleaned = 0.000560805 Jy ! Component: 750 - total flux cleaned = 0.000665506 Jy ! Component: 800 - total flux cleaned = 0.00076731 Jy ! Component: 850 - total flux cleaned = 0.000800448 Jy ! Component: 900 - total flux cleaned = 0.000833165 Jy ! Component: 950 - total flux cleaned = 0.000833561 Jy ! Component: 1000 - total flux cleaned = 0.000849394 Jy ! Component: 1050 - total flux cleaned = 0.000941994 Jy ! Component: 1100 - total flux cleaned = 0.00100252 Jy ! Component: 1150 - total flux cleaned = 0.00104701 Jy ! Component: 1200 - total flux cleaned = 0.00109088 Jy ! Component: 1250 - total flux cleaned = 0.00113432 Jy ! Component: 1300 - total flux cleaned = 0.00117714 Jy ! Component: 1350 - total flux cleaned = 0.00121939 Jy ! Component: 1400 - total flux cleaned = 0.0013159 Jy ! Component: 1450 - total flux cleaned = 0.00138379 Jy ! Component: 1500 - total flux cleaned = 0.00145092 Jy ! Component: 1550 - total flux cleaned = 0.00153011 Jy ! Component: 1600 - total flux cleaned = 0.00158231 Jy ! Component: 1650 - total flux cleaned = 0.0016469 Jy ! Component: 1700 - total flux cleaned = 0.00174899 Jy ! Component: 1750 - total flux cleaned = 0.00179949 Jy ! Component: 1800 - total flux cleaned = 0.00186194 Jy ! Component: 1850 - total flux cleaned = 0.00196072 Jy ! Component: 1900 - total flux cleaned = 0.00202182 Jy ! Component: 1950 - total flux cleaned = 0.00210663 Jy ! Component: 2000 - total flux cleaned = 0.00217864 Jy ! Component: 2050 - total flux cleaned = 0.00227398 Jy ! Component: 2100 - total flux cleaned = 0.00235661 Jy ! Component: 2150 - total flux cleaned = 0.00242701 Jy ! Component: 2200 - total flux cleaned = 0.00248533 Jy ! Component: 2250 - total flux cleaned = 0.00256635 Jy ! Component: 2300 - total flux cleaned = 0.00263526 Jy ! Component: 2350 - total flux cleaned = 0.00269222 Jy ! Component: 2400 - total flux cleaned = 0.00274899 Jy ! Component: 2450 - total flux cleaned = 0.00280541 Jy ! Component: 2500 - total flux cleaned = 0.00286147 Jy ! Component: 2550 - total flux cleaned = 0.00292821 Jy ! Component: 2600 - total flux cleaned = 0.00297246 Jy ! Component: 2650 - total flux cleaned = 0.00306032 Jy ! Component: 2700 - total flux cleaned = 0.00310396 Jy ! Component: 2750 - total flux cleaned = 0.0031907 Jy ! Component: 2800 - total flux cleaned = 0.0032553 Jy ! Component: 2850 - total flux cleaned = 0.00330888 Jy ! Component: 2900 - total flux cleaned = 0.00336226 Jy ! Component: 2950 - total flux cleaned = 0.00343652 Jy ! Component: 3000 - total flux cleaned = 0.00345767 Jy ! Component: 3050 - total flux cleaned = 0.00351037 Jy ! Component: 3100 - total flux cleaned = 0.00355224 Jy ! Component: 3150 - total flux cleaned = 0.00358353 Jy ! Component: 3200 - total flux cleaned = 0.00362519 Jy ! Component: 3250 - total flux cleaned = 0.00366671 Jy ! Component: 3300 - total flux cleaned = 0.00368742 Jy ! Component: 3350 - total flux cleaned = 0.00378037 Jy ! Component: 3400 - total flux cleaned = 0.00381121 Jy ! Component: 3450 - total flux cleaned = 0.0038729 Jy ! Component: 3500 - total flux cleaned = 0.00391393 Jy ! Component: 3550 - total flux cleaned = 0.00395497 Jy ! Component: 3600 - total flux cleaned = 0.00399595 Jy ! Component: 3650 - total flux cleaned = 0.00407777 Jy ! Component: 3700 - total flux cleaned = 0.00411856 Jy ! Component: 3750 - total flux cleaned = 0.00417977 Jy ! Component: 3800 - total flux cleaned = 0.00422047 Jy ! Component: 3850 - total flux cleaned = 0.00427138 Jy ! Component: 3900 - total flux cleaned = 0.00429173 Jy ! Component: 3950 - total flux cleaned = 0.00431213 Jy ! Component: 4000 - total flux cleaned = 0.00434261 Jy ! Component: 4050 - total flux cleaned = 0.00437315 Jy ! Total flux subtracted in 4096 components = 0.00438329 Jy ! Clean residual min=-0.000559 max=0.000567 Jy/beam ! Clean residual mean=0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.200965 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 409 components and 0.200965 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219a_uvs/J1608+5613_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.413 x 16.92 at 44.22 degrees (North through East) ! Clean map min=-0.0022476 max=0.16686 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1608+5613_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.166857 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175809 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.316096 0.316096 0.632192 1.26438 2.52877 5.05754 10.1151 20.2301 40.4603 80.9206 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.166 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 949.078 quit ! Quitting program ! Log file /scr/pima/bg219a_uvs/J1608+5613_S_uvs.log closed on Wed Apr 6 22:58:34 2016