! Started logfile: /scr/pima/bg219a_uvs/J1608+5613_S_dfm.log on Fri May 20 00:13:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1608+5613_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1608+5613_S_uva.fits
! AN table 1: 28 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.882653 visibilities/baseline/integration-bin.
! Found source: J1608+5613
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 2076 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1608+5613_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.019926Jy  sigma=25.697480
! Fit after  self-cal, rms=0.834965Jy  sigma=20.770435
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.874 mas, bmaj=16.65 mas, bpa=44.75 degrees
! Estimated noise=0.947041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12329 Jy
! Component: 100  -  total flux cleaned = 0.156906 Jy
! Total flux subtracted in 100 components = 0.156906 Jy
! Clean residual min=-0.009805 max=0.016277 Jy/beam
! Clean residual mean=-0.000154 rms=0.003541 Jy/beam
! Combined flux in latest and established models = 0.156906 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.156906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060163Jy  sigma=1.491379
! Fit after  self-cal, rms=0.060182Jy  sigma=1.490963
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.417 mas, bmaj=16.84 mas, bpa=44.3 degrees
! Estimated noise=0.632543 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250491 Jy
! Component: 100  -  total flux cleaned = 0.0364075 Jy
! Component: 150  -  total flux cleaned = 0.0418455 Jy
! Component: 200  -  total flux cleaned = 0.0439716 Jy
! Total flux subtracted in 200 components = 0.0439716 Jy
! Clean residual min=-0.003373 max=0.004773 Jy/beam
! Clean residual mean=-0.000065 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.200877 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.200877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051057Jy  sigma=1.216931
! Fit after  self-cal, rms=0.051080Jy  sigma=1.216071
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.417 x 16.84 at 44.3 degrees (North through East)
! Clean map  min=-0.0031976  max=0.16889 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        1.02     NL        0.98     
!   OV        1.03     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        1.02     NL        1.02     
!   OV        1.01     PT        0.97     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        0.98     MK        1.04     NL        0.98     
!   OV        1.01     PT        0.98     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     LA        0.99     MK        0.99     NL        0.95     
!   OV        0.95     PT        0.96     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.051080Jy  sigma=1.216071
! Fit after  self-cal, rms=0.050323Jy  sigma=1.202316
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.422 mas, bmaj=16.88 mas, bpa=44.23 degrees
! Estimated noise=0.627365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000242 Jy
! Component: 100  -  total flux cleaned = 0.000312318 Jy
! Component: 150  -  total flux cleaned = 0.000273298 Jy
! Component: 200  -  total flux cleaned = 0.000202309 Jy
! Total flux subtracted in 200 components = 0.000202309 Jy
! Clean residual min=-0.002506 max=0.002892 Jy/beam
! Clean residual mean=-0.000007 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.20108 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 45 components and 0.20108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050208Jy  sigma=1.199855
! Fit after  self-cal, rms=0.050218Jy  sigma=1.199661
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050218Jy  sigma=1.199661
! Fit after  self-cal, rms=0.050128Jy  sigma=1.199413
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=16.89 mas, bpa=44.22 degrees
! Estimated noise=0.62692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123669 Jy
! Component: 100  -  total flux cleaned = 0.000218142 Jy
! Component: 150  -  total flux cleaned = 0.000245101 Jy
! Component: 200  -  total flux cleaned = 0.000318772 Jy
! Total flux subtracted in 200 components = 0.000318772 Jy
! Clean residual min=-0.002561 max=0.002777 Jy/beam
! Clean residual mean=-0.000007 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.201398 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 60 components and 0.201398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050087Jy  sigma=1.198589
! Fit after  self-cal, rms=0.050085Jy  sigma=1.198558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (58, -108).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000908532 Jy
! Component: 100  -  total flux cleaned = 0.00075699 Jy
! Component: 150  -  total flux cleaned = 0.000699669 Jy
! Component: 200  -  total flux cleaned = 0.000745621 Jy
! Total flux subtracted in 200 components = 0.000745621 Jy
! Clean residual min=-0.001641 max=0.001734 Jy/beam
! Clean residual mean=-0.000009 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.202144 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 96 components and 0.202144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049870Jy  sigma=1.194187
! Fit after  self-cal, rms=0.049859Jy  sigma=1.193932
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049859Jy  sigma=1.193932
! Fit after  self-cal, rms=0.049780Jy  sigma=1.193710
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.414 mas, bmaj=16.91 mas, bpa=44.22 degrees
! Estimated noise=0.626161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.02689e-05 Jy
! Component: 100  -  total flux cleaned = -7.2767e-06 Jy
! Component: 150  -  total flux cleaned = -3.54329e-05 Jy
! Component: 200  -  total flux cleaned = -0.000121151 Jy
! Total flux subtracted in 200 components = -0.000121151 Jy
! Clean residual min=-0.001586 max=0.001639 Jy/beam
! Clean residual mean=-0.000004 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.202023 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 112 components and 0.202023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049726Jy  sigma=1.192730
! Fit after  self-cal, rms=0.049725Jy  sigma=1.192684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000484058 Jy
! Component: 100  -  total flux cleaned = -0.000430185 Jy
! Component: 150  -  total flux cleaned = -0.000482565 Jy
! Component: 200  -  total flux cleaned = -0.000507877 Jy
! Total flux subtracted in 200 components = -0.000507877 Jy
! Clean residual min=-0.001523 max=0.001590 Jy/beam
! Clean residual mean=-0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.201515 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 127 components and 0.201515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049697Jy  sigma=1.192142
! Fit after  self-cal, rms=0.049696Jy  sigma=1.192124
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049696Jy  sigma=1.192124
! Fit after  self-cal, rms=0.049662Jy  sigma=1.192082
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.242 mas, bmaj=16.05 mas, bpa=41.22 degrees
! Estimated noise=0.74839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000625914 Jy
! Component: 100  -  total flux cleaned = -0.000861965 Jy
! Component: 150  -  total flux cleaned = -0.000990704 Jy
! Component: 200  -  total flux cleaned = -0.00107061 Jy
! Total flux subtracted in 200 components = -0.00107061 Jy
! Clean residual min=-0.001222 max=0.001030 Jy/beam
! Clean residual mean=0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.200444 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 147 components and 0.200444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049656Jy  sigma=1.191770
! Fit after  self-cal, rms=0.049654Jy  sigma=1.191750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000440684 Jy
! Component: 100  -  total flux cleaned = -0.0006183 Jy
! Component: 150  -  total flux cleaned = -0.000740293 Jy
! Component: 200  -  total flux cleaned = -0.000777809 Jy
! Total flux subtracted in 200 components = -0.000777809 Jy
! Clean residual min=-0.001119 max=0.000960 Jy/beam
! Clean residual mean=0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.199667 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 171 components and 0.199667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049649Jy  sigma=1.191574
! Fit after  self-cal, rms=0.049649Jy  sigma=1.191565
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=16.92 mas, bpa=44.22 degrees
! Estimated noise=0.62597 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.413 x 16.92 at 44.22 degrees (North through East)
! Clean map  min=-0.002409  max=0.16737 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=16.76 mas, bpa=44.69 degrees
! Estimated noise=0.933157 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121416 Jy
! Component: 100  -  total flux cleaned = 0.155197 Jy
! Component: 150  -  total flux cleaned = 0.174348 Jy
! Component: 200  -  total flux cleaned = 0.185547 Jy
! Total flux subtracted in 200 components = 0.185547 Jy
! Clean residual min=-0.005756 max=0.006386 Jy/beam
! Clean residual mean=-0.000049 rms=0.001710 Jy/beam
! Combined flux in latest and established models = 0.185547 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.185547 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=16.92 mas, bpa=44.22 degrees
! Estimated noise=0.62597 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00856081 Jy
! Component: 100  -  total flux cleaned = 0.0128101 Jy
! Component: 150  -  total flux cleaned = 0.0130853 Jy
! Component: 200  -  total flux cleaned = 0.0127919 Jy
! Total flux subtracted in 200 components = 0.0127919 Jy
! Clean residual min=-0.002583 max=0.002257 Jy/beam
! Clean residual mean=-0.000019 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.198338 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 35 components and 0.198338 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.242 mas, bmaj=16.05 mas, bpa=41.22 degrees
! Estimated noise=0.74839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.70643e-05 Jy
! Component: 100  -  total flux cleaned = -0.000337112 Jy
! Component: 150  -  total flux cleaned = -0.000997621 Jy
! Component: 200  -  total flux cleaned = -0.0012353 Jy
! Total flux subtracted in 200 components = -0.0012353 Jy
! Clean residual min=-0.001302 max=0.001507 Jy/beam
! Clean residual mean=-0.000006 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.197103 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0002394 Jy
! Component: 100  -  total flux cleaned = -0.000448363 Jy
! Component: 150  -  total flux cleaned = -0.000571008 Jy
! Component: 200  -  total flux cleaned = -0.000657271 Jy
! Total flux subtracted in 200 components = -0.000657271 Jy
! Clean residual min=-0.001116 max=0.001253 Jy/beam
! Clean residual mean=-0.000002 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.196446 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 103 components and 0.196446 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=16.92 mas, bpa=44.22 degrees
! Estimated noise=0.62597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000257206 Jy
! Component: 100  -  total flux cleaned = -0.000160597 Jy
! Component: 150  -  total flux cleaned = -2.61225e-05 Jy
! Component: 200  -  total flux cleaned = 0.000136307 Jy
! Total flux subtracted in 200 components = 0.000136307 Jy
! Clean residual min=-0.001717 max=0.001540 Jy/beam
! Clean residual mean=0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.196582 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 140 components and 0.196582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049736Jy  sigma=1.193094
! Fit after  self-cal, rms=0.049729Jy  sigma=1.193032
wmodel /J1608+5613_S_map.mod
! wmodel: Unable to open new model file: /J1608+5613_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1608+5613_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.413 x 16.92 at 44.22 degrees (North through East)
! Clean map  min=-0.0027065  max=0.16688 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1608+5613_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.16688 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000465568 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.83695 0.83695 1.6739 3.3478 6.6956 13.3912 26.7824 53.5648
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.166 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  358.444 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1608+5613_S_dfm.log closed on Fri May 20 00:13:12 2016