! Started logfile: /scr/pima/bg219a_uvs/J1524-3012_X_dfm.log on Fri May 20 00:12:30 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1524-3012_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1524-3012_X_uva.fits
! AN table 1: 57 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.654971 visibilities/baseline/integration-bin.
! Found source: J1524-3012
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6720 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1524-3012_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019885Jy  sigma=24.930930
! Fit after  self-cal, rms=0.846935Jy  sigma=20.603889
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5283 mas, bmaj=1.731 mas, bpa=-4.724 degrees
! Estimated noise=0.794602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113533 Jy
! Component: 100  -  total flux cleaned = 0.158869 Jy
! Total flux subtracted in 100 components = 0.158869 Jy
! Clean residual min=-0.012829 max=0.021333 Jy/beam
! Clean residual mean=0.000037 rms=0.003817 Jy/beam
! Combined flux in latest and established models = 0.158869 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.158869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067605Jy  sigma=1.653760
! Fit after  self-cal, rms=0.067441Jy  sigma=1.648063
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6888 mas, bmaj=2.081 mas, bpa=-5.598 degrees
! Estimated noise=0.360438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273204 Jy
! Component: 100  -  total flux cleaned = 0.0398262 Jy
! Component: 150  -  total flux cleaned = 0.0456669 Jy
! Component: 200  -  total flux cleaned = 0.0483964 Jy
! Total flux subtracted in 200 components = 0.0483964 Jy
! Clean residual min=-0.006704 max=0.011876 Jy/beam
! Clean residual mean=-0.000007 rms=0.002099 Jy/beam
! Combined flux in latest and established models = 0.207266 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.207266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057258Jy  sigma=1.383871
! Fit after  self-cal, rms=0.057218Jy  sigma=1.382381
! Inverting map 
! Added new window around map position (-1.4, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010123 Jy
! Component: 100  -  total flux cleaned = 0.0140347 Jy
! Component: 150  -  total flux cleaned = 0.0150696 Jy
! Component: 200  -  total flux cleaned = 0.0158447 Jy
! Total flux subtracted in 200 components = 0.0158447 Jy
! Clean residual min=-0.004114 max=0.006040 Jy/beam
! Clean residual mean=-0.000003 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.22311 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.22311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055452Jy  sigma=1.338444
! Fit after  self-cal, rms=0.055241Jy  sigma=1.332720
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6888 x 2.081 at -5.598 degrees (North through East)
! Clean map  min=-0.0030219  max=0.14532 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.98     MK        1.01     NL        1.08     OV        1.01     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.01     MK        1.05     NL        1.08     OV        1.01     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        1.05     NL        1.12     OV        1.01     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.04     NL        1.12     OV        0.99     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.00     NL        1.07     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.02     NL        1.05     OV        1.02     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.96     NL        1.06     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.99     MK        1.05     NL        1.11     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        0.99     NL        1.10     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.96     MK        1.00     NL        1.04     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.97     NL        1.09     OV        1.00     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   LA        1.00     MK        0.93     NL        1.04     OV        1.00     
!   PT        0.95     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.055241Jy  sigma=1.332720
! Fit after  self-cal, rms=0.055502Jy  sigma=1.319965
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.689 mas, bmaj=2.085 mas, bpa=-5.464 degrees
! Estimated noise=0.363294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257483 Jy
! Component: 100  -  total flux cleaned = 0.000179235 Jy
! Component: 150  -  total flux cleaned = 7.72871e-05 Jy
! Component: 200  -  total flux cleaned = 4.57612e-05 Jy
! Total flux subtracted in 200 components = 4.57612e-05 Jy
! Clean residual min=-0.002054 max=0.002309 Jy/beam
! Clean residual mean=0.000000 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.223156 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 43 components and 0.223156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055454Jy  sigma=1.318852
! Fit after  self-cal, rms=0.055464Jy  sigma=1.318651
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055464Jy  sigma=1.318651
! Fit after  self-cal, rms=0.054976Jy  sigma=1.315025
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.686 mas, bmaj=2.077 mas, bpa=-5.675 degrees
! Estimated noise=0.360967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000478927 Jy
! Component: 100  -  total flux cleaned = -0.000449082 Jy
! Component: 150  -  total flux cleaned = -0.000469198 Jy
! Component: 200  -  total flux cleaned = -0.000541114 Jy
! Total flux subtracted in 200 components = -0.000541114 Jy
! Clean residual min=-0.002046 max=0.001805 Jy/beam
! Clean residual mean=-0.000000 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.222615 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.222615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054953Jy  sigma=1.314483
! Fit after  self-cal, rms=0.054953Jy  sigma=1.314366
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113004 Jy
! Component: 100  -  total flux cleaned = -0.000166331 Jy
! Component: 150  -  total flux cleaned = -0.000229874 Jy
! Component: 200  -  total flux cleaned = -0.000258776 Jy
! Total flux subtracted in 200 components = -0.000258776 Jy
! Clean residual min=-0.001939 max=0.001741 Jy/beam
! Clean residual mean=-0.000000 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.222356 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.222356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054942Jy  sigma=1.314127
! Fit after  self-cal, rms=0.054941Jy  sigma=1.314095
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054941Jy  sigma=1.314095
! Fit after  self-cal, rms=0.054781Jy  sigma=1.314027
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6848 mas, bmaj=2.075 mas, bpa=-5.737 degrees
! Estimated noise=0.359998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000177111 Jy
! Component: 100  -  total flux cleaned = -0.000193216 Jy
! Component: 150  -  total flux cleaned = -0.000208329 Jy
! Component: 200  -  total flux cleaned = -0.000249567 Jy
! Total flux subtracted in 200 components = -0.000249567 Jy
! Clean residual min=-0.001921 max=0.001632 Jy/beam
! Clean residual mean=0.000000 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.222107 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 0.222107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054772Jy  sigma=1.313821
! Fit after  self-cal, rms=0.054771Jy  sigma=1.313802
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.44176e-05 Jy
! Component: 100  -  total flux cleaned = -8.54784e-05 Jy
! Component: 150  -  total flux cleaned = -0.000122406 Jy
! Component: 200  -  total flux cleaned = -0.00014508 Jy
! Total flux subtracted in 200 components = -0.00014508 Jy
! Clean residual min=-0.001878 max=0.001580 Jy/beam
! Clean residual mean=0.000000 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.221962 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 64 components and 0.221962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054765Jy  sigma=1.313679
! Fit after  self-cal, rms=0.054765Jy  sigma=1.313665
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054765Jy  sigma=1.313665
! Fit after  self-cal, rms=0.054688Jy  sigma=1.313642
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.93 mas, bmaj=6.363 mas, bpa=-1.27 degrees
! Estimated noise=0.525879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136653 Jy
! Component: 100  -  total flux cleaned = 0.000137472 Jy
! Component: 150  -  total flux cleaned = 0.000138439 Jy
! Component: 200  -  total flux cleaned = 0.000145421 Jy
! Total flux subtracted in 200 components = 0.000145421 Jy
! Clean residual min=-0.001872 max=0.001616 Jy/beam
! Clean residual mean=0.000001 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.222107 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 69 components and 0.222107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054689Jy  sigma=1.313635
! Fit after  self-cal, rms=0.054687Jy  sigma=1.313614
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101799 Jy
! Component: 100  -  total flux cleaned = 0.000108209 Jy
! Component: 150  -  total flux cleaned = 0.00011872 Jy
! Component: 200  -  total flux cleaned = 0.000123385 Jy
! Total flux subtracted in 200 components = 0.000123385 Jy
! Clean residual min=-0.001846 max=0.001583 Jy/beam
! Clean residual mean=0.000002 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.22223 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 73 components and 0.22223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054690Jy  sigma=1.313670
! Fit after  self-cal, rms=0.054689Jy  sigma=1.313663
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6841 mas, bmaj=2.073 mas, bpa=-5.774 degrees
! Estimated noise=0.359495 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6841 x 2.073 at -5.774 degrees (North through East)
! Clean map  min=-0.0017271  max=0.14461 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5241 mas, bmaj=1.735 mas, bpa=-4.867 degrees
! Estimated noise=0.781447 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112131 Jy
! Component: 100  -  total flux cleaned = 0.158089 Jy
! Component: 150  -  total flux cleaned = 0.18121 Jy
! Component: 200  -  total flux cleaned = 0.194365 Jy
! Total flux subtracted in 200 components = 0.194365 Jy
! Clean residual min=-0.006345 max=0.008128 Jy/beam
! Clean residual mean=0.000014 rms=0.001693 Jy/beam
! Combined flux in latest and established models = 0.194365 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.194365 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6841 mas, bmaj=2.073 mas, bpa=-5.774 degrees
! Estimated noise=0.359495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105365 Jy
! Component: 100  -  total flux cleaned = 0.01661 Jy
! Component: 150  -  total flux cleaned = 0.0203464 Jy
! Component: 200  -  total flux cleaned = 0.0227784 Jy
! Total flux subtracted in 200 components = 0.0227784 Jy
! Clean residual min=-0.002411 max=0.002216 Jy/beam
! Clean residual mean=0.000000 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.217143 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.217143 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.93 mas, bmaj=6.363 mas, bpa=-1.27 degrees
! Estimated noise=0.525879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314543 Jy
! Component: 100  -  total flux cleaned = 0.00447627 Jy
! Component: 150  -  total flux cleaned = 0.00509062 Jy
! Component: 200  -  total flux cleaned = 0.0053784 Jy
! Total flux subtracted in 200 components = 0.0053784 Jy
! Clean residual min=-0.001880 max=0.001562 Jy/beam
! Clean residual mean=0.000003 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.222522 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.60582e-05 Jy
! Component: 100  -  total flux cleaned = 3.09158e-05 Jy
! Component: 150  -  total flux cleaned = 2.57299e-05 Jy
! Component: 200  -  total flux cleaned = 2.59512e-05 Jy
! Total flux subtracted in 200 components = 2.59512e-05 Jy
! Clean residual min=-0.001869 max=0.001563 Jy/beam
! Clean residual mean=0.000003 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.222548 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 63 components and 0.222548 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6841 mas, bmaj=2.073 mas, bpa=-5.774 degrees
! Estimated noise=0.359495 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012989 Jy
! Component: 100  -  total flux cleaned = -0.00114145 Jy
! Component: 150  -  total flux cleaned = -0.00101685 Jy
! Component: 200  -  total flux cleaned = -0.000941571 Jy
! Total flux subtracted in 200 components = -0.000941571 Jy
! Clean residual min=-0.001812 max=0.001780 Jy/beam
! Clean residual mean=0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.221606 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 77 components and 0.221606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054703Jy  sigma=1.314047
! Fit after  self-cal, rms=0.054694Jy  sigma=1.313815
wmodel /J1524-3012_X_map.mod
! wmodel: Unable to open new model file: /J1524-3012_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1524-3012_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6841 x 2.073 at -5.774 degrees (North through East)
! Clean map  min=-0.0016244  max=0.14557 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1524-3012_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.14557 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000419479 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.864489 0.864489 1.72898 3.45796 6.91591 13.8318 27.6637 55.3273
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.145 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  347.025 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1524-3012_X_dfm.log closed on Fri May 20 00:12:32 2016