! Started logfile: /scr/pima/bg219a_uvs/J1457+0749_S_dfm.log on Fri May 20 00:11:52 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219a_uvs/J1457+0749_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1457+0749_S_uva.fits
! AN table 1: 28 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.714286 visibilities/baseline/integration-bin.
! Found source: J1457+0749
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 1680 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1457+0749_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012126Jy  sigma=26.453321
! Fit after  self-cal, rms=0.902258Jy  sigma=23.539099
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.659 mas, bmaj=7.039 mas, bpa=-7.745 degrees
! Estimated noise=0.932894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0749151 Jy
! Component: 100  -  total flux cleaned = 0.0916265 Jy
! Total flux subtracted in 100 components = 0.0916265 Jy
! Clean residual min=-0.005323 max=0.006769 Jy/beam
! Clean residual mean=-0.000151 rms=0.001516 Jy/beam
! Combined flux in latest and established models = 0.0916265 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0916265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050204Jy  sigma=1.245150
! Fit after  self-cal, rms=0.050204Jy  sigma=1.244797
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.21 mas, bmaj=8.03 mas, bpa=-5.703 degrees
! Estimated noise=0.734986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00907133 Jy
! Component: 100  -  total flux cleaned = 0.01328 Jy
! Component: 150  -  total flux cleaned = 0.0156434 Jy
! Component: 200  -  total flux cleaned = 0.0170265 Jy
! Total flux subtracted in 200 components = 0.0170265 Jy
! Clean residual min=-0.003866 max=0.003995 Jy/beam
! Clean residual mean=-0.000120 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.108653 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 36 components and 0.108653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048703Jy  sigma=1.203486
! Fit after  self-cal, rms=0.048713Jy  sigma=1.203021
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.21 x 8.03 at -5.703 degrees (North through East)
! Clean map  min=-0.0036333  max=0.097062 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     LA        1.00     MK        1.02     NL        0.97     
!   OV        1.00     PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        1.05     NL        1.00     
!   OV        1.02     PT        0.97     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     LA        0.99     MK        0.96     NL        0.93     
!   OV        1.03     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.11     LA        1.00     MK        1.03     NL        1.01     
!   OV        0.98     PT        1.02     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.048713Jy  sigma=1.203021
! Fit after  self-cal, rms=0.048431Jy  sigma=1.197612
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.216 mas, bmaj=8.018 mas, bpa=-5.6 degrees
! Estimated noise=0.732979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123826 Jy
! Component: 100  -  total flux cleaned = 2.65976e-05 Jy
! Component: 150  -  total flux cleaned = 9.33172e-05 Jy
! Component: 200  -  total flux cleaned = 0.000133913 Jy
! Total flux subtracted in 200 components = 0.000133913 Jy
! Clean residual min=-0.003741 max=0.004166 Jy/beam
! Clean residual mean=-0.000112 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.108787 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 45 components and 0.108787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048405Jy  sigma=1.197002
! Fit after  self-cal, rms=0.048401Jy  sigma=1.196835
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048401Jy  sigma=1.196835
! Fit after  self-cal, rms=0.048197Jy  sigma=1.191887
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.218 mas, bmaj=8.007 mas, bpa=-5.578 degrees
! Estimated noise=0.732853 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.12232e-05 Jy
! Component: 100  -  total flux cleaned = -3.25948e-06 Jy
! Component: 150  -  total flux cleaned = 4.03636e-05 Jy
! Component: 200  -  total flux cleaned = 6.78478e-05 Jy
! Total flux subtracted in 200 components = 6.78478e-05 Jy
! Clean residual min=-0.003202 max=0.003865 Jy/beam
! Clean residual mean=-0.000060 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.108855 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 0.108855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048184Jy  sigma=1.191690
! Fit after  self-cal, rms=0.048185Jy  sigma=1.191569
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-78.5, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00290739 Jy
! Component: 100  -  total flux cleaned = 0.00331946 Jy
! Component: 150  -  total flux cleaned = 0.00342909 Jy
! Component: 200  -  total flux cleaned = 0.00354902 Jy
! Total flux subtracted in 200 components = 0.00354902 Jy
! Clean residual min=-0.002825 max=0.002636 Jy/beam
! Clean residual mean=-0.000041 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.112404 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.112404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047887Jy  sigma=1.184203
! Fit after  self-cal, rms=0.047868Jy  sigma=1.183396
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047868Jy  sigma=1.183396
! Fit after  self-cal, rms=0.047907Jy  sigma=1.182826
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.221 mas, bmaj=8.017 mas, bpa=-5.521 degrees
! Estimated noise=0.733253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110234 Jy
! Component: 100  -  total flux cleaned = 0.00110707 Jy
! Component: 150  -  total flux cleaned = 0.00113706 Jy
! Component: 200  -  total flux cleaned = 0.00113837 Jy
! Total flux subtracted in 200 components = 0.00113837 Jy
! Clean residual min=-0.002685 max=0.002568 Jy/beam
! Clean residual mean=-0.000029 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.113542 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.113542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047842Jy  sigma=1.181294
! Fit after  self-cal, rms=0.047841Jy  sigma=1.181157
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261293 Jy
! Component: 100  -  total flux cleaned = 0.00033495 Jy
! Component: 150  -  total flux cleaned = 0.000336235 Jy
! Component: 200  -  total flux cleaned = 0.000357416 Jy
! Total flux subtracted in 200 components = 0.000357416 Jy
! Clean residual min=-0.002618 max=0.002583 Jy/beam
! Clean residual mean=-0.000028 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.1139 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 85 components and 0.1139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047819Jy  sigma=1.180616
! Fit after  self-cal, rms=0.047818Jy  sigma=1.180597
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047818Jy  sigma=1.180597
! Fit after  self-cal, rms=0.047937Jy  sigma=1.180379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.966 mas, bmaj=16.76 mas, bpa=-13.18 degrees
! Estimated noise=0.927488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000455177 Jy
! Component: 100  -  total flux cleaned = 0.000650265 Jy
! Component: 150  -  total flux cleaned = 0.000765053 Jy
! Component: 200  -  total flux cleaned = 0.000799706 Jy
! Total flux subtracted in 200 components = 0.000799706 Jy
! Clean residual min=-0.002316 max=0.002432 Jy/beam
! Clean residual mean=-0.000049 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.114699 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 97 components and 0.114699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047931Jy  sigma=1.180186
! Fit after  self-cal, rms=0.047931Jy  sigma=1.180154
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.75894e-05 Jy
! Component: 100  -  total flux cleaned = 0.000148616 Jy
! Component: 150  -  total flux cleaned = 0.000180608 Jy
! Component: 200  -  total flux cleaned = 0.000225552 Jy
! Total flux subtracted in 200 components = 0.000225552 Jy
! Clean residual min=-0.002278 max=0.002410 Jy/beam
! Clean residual mean=-0.000046 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.114925 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 101 components and 0.114925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047930Jy  sigma=1.180125
! Fit after  self-cal, rms=0.047929Jy  sigma=1.180112
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.223 mas, bmaj=8.025 mas, bpa=-5.549 degrees
! Estimated noise=0.7345 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.223 x 8.025 at -5.549 degrees (North through East)
! Clean map  min=-0.0025435  max=0.09606 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.664 mas, bmaj=7.012 mas, bpa=-7.634 degrees
! Estimated noise=0.929432 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.074531 Jy
! Component: 100  -  total flux cleaned = 0.09114 Jy
! Component: 150  -  total flux cleaned = 0.0971046 Jy
! Component: 200  -  total flux cleaned = 0.100982 Jy
! Total flux subtracted in 200 components = 0.100982 Jy
! Clean residual min=-0.004670 max=0.004624 Jy/beam
! Clean residual mean=-0.000079 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.100982 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.100982 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.223 mas, bmaj=8.025 mas, bpa=-5.549 degrees
! Estimated noise=0.7345 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00505526 Jy
! Component: 100  -  total flux cleaned = 0.0079906 Jy
! Component: 150  -  total flux cleaned = 0.00941047 Jy
! Component: 200  -  total flux cleaned = 0.0103251 Jy
! Total flux subtracted in 200 components = 0.0103251 Jy
! Clean residual min=-0.003066 max=0.002505 Jy/beam
! Clean residual mean=-0.000044 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.111307 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 51 components and 0.111307 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.966 mas, bmaj=16.76 mas, bpa=-13.18 degrees
! Estimated noise=0.927488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017596 Jy
! Component: 100  -  total flux cleaned = 0.00248574 Jy
! Component: 150  -  total flux cleaned = 0.00287631 Jy
! Component: 200  -  total flux cleaned = 0.00307036 Jy
! Total flux subtracted in 200 components = 0.00307036 Jy
! Clean residual min=-0.002469 max=0.002375 Jy/beam
! Clean residual mean=-0.000053 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.114377 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126509 Jy
! Component: 100  -  total flux cleaned = 0.000241869 Jy
! Component: 150  -  total flux cleaned = 0.00033007 Jy
! Component: 200  -  total flux cleaned = 0.000410844 Jy
! Total flux subtracted in 200 components = 0.000410844 Jy
! Clean residual min=-0.002352 max=0.002427 Jy/beam
! Clean residual mean=-0.000048 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.114788 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 79 components and 0.114788 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.223 mas, bmaj=8.025 mas, bpa=-5.549 degrees
! Estimated noise=0.7345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.52172e-05 Jy
! Component: 100  -  total flux cleaned = -5.28162e-05 Jy
! Component: 150  -  total flux cleaned = -0.000182289 Jy
! Component: 200  -  total flux cleaned = -0.000301328 Jy
! Total flux subtracted in 200 components = -0.000301328 Jy
! Clean residual min=-0.002692 max=0.002592 Jy/beam
! Clean residual mean=-0.000025 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.114487 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 91 components and 0.114487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047961Jy  sigma=1.180877
! Fit after  self-cal, rms=0.047954Jy  sigma=1.180764
wmodel /J1457+0749_S_map.mod
! wmodel: Unable to open new model file: /J1457+0749_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1457+0749_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.223 x 8.025 at -5.549 degrees (North through East)
! Clean map  min=-0.002546  max=0.096184 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1457+0749_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0961837 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000623346 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.94424 1.94424 3.88847 7.77695 15.5539 31.1078 62.2156
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  154.302 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1457+0749_S_dfm.log closed on Fri May 20 00:11:54 2016