! Started logfile: /scr/pima/bg219a_uvs/J1442+3234_X_dfm.log on Fri May 20 00:11:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1442+3234_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1442+3234_X_uva.fits
! AN table 1: 36 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.689153 visibilities/baseline/integration-bin.
! Found source: J1442+3234
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6252 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1442+3234_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019313Jy  sigma=28.593652
! Fit after  self-cal, rms=0.822553Jy  sigma=22.993606
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8058 mas, bmaj=1.117 mas, bpa=24.16 degrees
! Estimated noise=0.63767 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124203 Jy
! Component: 100  -  total flux cleaned = 0.162896 Jy
! Total flux subtracted in 100 components = 0.162896 Jy
! Clean residual min=-0.009973 max=0.016479 Jy/beam
! Clean residual mean=-0.000029 rms=0.002847 Jy/beam
! Combined flux in latest and established models = 0.162896 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.162896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067982Jy  sigma=1.885398
! Fit after  self-cal, rms=0.067985Jy  sigma=1.884384
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184292 Jy
! Component: 100  -  total flux cleaned = 0.028844 Jy
! Total flux subtracted in 100 components = 0.028844 Jy
! Clean residual min=-0.008676 max=0.010985 Jy/beam
! Clean residual mean=-0.000022 rms=0.001944 Jy/beam
! Combined flux in latest and established models = 0.19174 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.19174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059097Jy  sigma=1.624767
! Fit after  self-cal, rms=0.059100Jy  sigma=1.624185
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=1.401 mas, bpa=12.71 degrees
! Estimated noise=0.344702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127094 Jy
! Component: 100  -  total flux cleaned = 0.0189594 Jy
! Component: 150  -  total flux cleaned = 0.0222273 Jy
! Component: 200  -  total flux cleaned = 0.0227925 Jy
! Total flux subtracted in 200 components = 0.0227925 Jy
! Clean residual min=-0.007287 max=0.012581 Jy/beam
! Clean residual mean=-0.000058 rms=0.002230 Jy/beam
! Combined flux in latest and established models = 0.214533 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 25 components and 0.214533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056446Jy  sigma=1.552918
! Fit after  self-cal, rms=0.056430Jy  sigma=1.552358
! Inverting map 
! Added new window around map position (2.4, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115776 Jy
! Component: 100  -  total flux cleaned = 0.0167919 Jy
! Component: 150  -  total flux cleaned = 0.0188463 Jy
! Component: 200  -  total flux cleaned = 0.0201546 Jy
! Total flux subtracted in 200 components = 0.0201546 Jy
! Clean residual min=-0.004725 max=0.005295 Jy/beam
! Clean residual mean=-0.000035 rms=0.001368 Jy/beam
! Combined flux in latest and established models = 0.234687 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 53 components and 0.234687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054131Jy  sigma=1.487795
! Fit after  self-cal, rms=0.053956Jy  sigma=1.482126
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.127 x 1.401 at 12.71 degrees (North through East)
! Clean map  min=-0.0042255  max=0.17479 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.99     MK        1.01     NL        1.05     
!   OV        1.02     PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        1.00     MK        1.04     NL        1.00     
!   OV        1.02     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.00     MK        1.02     NL        1.04     
!   OV        1.01     PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.98     MK        0.99     NL        1.03     
!   OV        1.05     PT        0.97     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.98     MK        1.00     NL        1.02     
!   OV        1.00     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.99     MK        1.02     NL        1.02     
!   OV        0.99     PT        0.99     SC        0.91     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        1.03     NL        1.03     
!   OV        1.02     PT        0.95     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.99     MK        1.02     NL        1.00     
!   OV        1.01     PT        0.98     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        1.00     MK        1.04     NL        1.01     
!   OV        1.01     PT        0.98     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        1.01     MK        1.06     NL        1.05     
!   OV        0.99     PT        0.96     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        0.96     MK        0.98     NL        1.01     
!   OV        1.08     PT        0.95     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.99     MK        1.04     NL        1.00     
!   OV        1.04     PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.053956Jy  sigma=1.482126
! Fit after  self-cal, rms=0.053755Jy  sigma=1.471706
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.128 mas, bmaj=1.411 mas, bpa=13.75 degrees
! Estimated noise=0.3462 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204556 Jy
! Component: 100  -  total flux cleaned = 0.00226285 Jy
! Component: 150  -  total flux cleaned = 0.00256042 Jy
! Component: 200  -  total flux cleaned = 0.00286013 Jy
! Total flux subtracted in 200 components = 0.00286013 Jy
! Clean residual min=-0.003577 max=0.004319 Jy/beam
! Clean residual mean=-0.000019 rms=0.001058 Jy/beam
! Combined flux in latest and established models = 0.237547 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 72 components and 0.237547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053576Jy  sigma=1.466654
! Fit after  self-cal, rms=0.053548Jy  sigma=1.465882
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053548Jy  sigma=1.465882
! Fit after  self-cal, rms=0.053612Jy  sigma=1.457813
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.129 mas, bmaj=1.403 mas, bpa=13.38 degrees
! Estimated noise=0.347165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000863863 Jy
! Component: 100  -  total flux cleaned = 0.00130081 Jy
! Component: 150  -  total flux cleaned = 0.00165473 Jy
! Component: 200  -  total flux cleaned = 0.00175498 Jy
! Total flux subtracted in 200 components = 0.00175498 Jy
! Clean residual min=-0.003255 max=0.003652 Jy/beam
! Clean residual mean=-0.000009 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.239302 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 86 components and 0.239302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053536Jy  sigma=1.455716
! Fit after  self-cal, rms=0.053536Jy  sigma=1.455459
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25.6, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00338308 Jy
! Component: 100  -  total flux cleaned = 0.00521406 Jy
! Component: 150  -  total flux cleaned = 0.00651121 Jy
! Component: 200  -  total flux cleaned = 0.00751747 Jy
! Total flux subtracted in 200 components = 0.00751747 Jy
! Clean residual min=-0.002414 max=0.002719 Jy/beam
! Clean residual mean=-0.000000 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.24682 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 114 components and 0.24682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053306Jy  sigma=1.449149
! Fit after  self-cal, rms=0.053290Jy  sigma=1.448739
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053290Jy  sigma=1.448739
! Fit after  self-cal, rms=0.053269Jy  sigma=1.448268
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.131 mas, bmaj=1.402 mas, bpa=12.98 degrees
! Estimated noise=0.347202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131154 Jy
! Component: 100  -  total flux cleaned = 0.00205758 Jy
! Component: 150  -  total flux cleaned = 0.00251756 Jy
! Component: 200  -  total flux cleaned = 0.0027861 Jy
! Total flux subtracted in 200 components = 0.0027861 Jy
! Clean residual min=-0.002156 max=0.002225 Jy/beam
! Clean residual mean=0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.249606 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 129 components and 0.249606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053224Jy  sigma=1.447011
! Fit after  self-cal, rms=0.053220Jy  sigma=1.446935
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000510702 Jy
! Component: 100  -  total flux cleaned = 0.000753381 Jy
! Component: 150  -  total flux cleaned = 0.000978152 Jy
! Component: 200  -  total flux cleaned = 0.00118802 Jy
! Total flux subtracted in 200 components = 0.00118802 Jy
! Clean residual min=-0.002113 max=0.002058 Jy/beam
! Clean residual mean=0.000003 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.250794 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 136 components and 0.250794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053201Jy  sigma=1.446461
! Fit after  self-cal, rms=0.053201Jy  sigma=1.446440
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053201Jy  sigma=1.446440
! Fit after  self-cal, rms=0.053216Jy  sigma=1.446276
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.46 mas, bmaj=3.056 mas, bpa=10.77 degrees
! Estimated noise=0.424462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129902 Jy
! Component: 100  -  total flux cleaned = 0.00214526 Jy
! Component: 150  -  total flux cleaned = 0.0025788 Jy
! Component: 200  -  total flux cleaned = 0.0028364 Jy
! Total flux subtracted in 200 components = 0.0028364 Jy
! Clean residual min=-0.002366 max=0.002499 Jy/beam
! Clean residual mean=0.000008 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.25363 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 147 components and 0.25363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053203Jy  sigma=1.445830
! Fit after  self-cal, rms=0.053201Jy  sigma=1.445771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000353749 Jy
! Component: 100  -  total flux cleaned = 0.000504035 Jy
! Component: 150  -  total flux cleaned = 0.000662673 Jy
! Component: 200  -  total flux cleaned = 0.000773003 Jy
! Total flux subtracted in 200 components = 0.000773003 Jy
! Clean residual min=-0.002306 max=0.002420 Jy/beam
! Clean residual mean=0.000010 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.254403 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 152 components and 0.254403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053195Jy  sigma=1.445582
! Fit after  self-cal, rms=0.053194Jy  sigma=1.445560
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.132 mas, bmaj=1.402 mas, bpa=12.89 degrees
! Estimated noise=0.347438 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.132 x 1.402 at 12.89 degrees (North through East)
! Clean map  min=-0.0017877  max=0.17497 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8083 mas, bmaj=1.114 mas, bpa=24.14 degrees
! Estimated noise=0.647577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.125953 Jy
! Component: 100  -  total flux cleaned = 0.165331 Jy
! Component: 150  -  total flux cleaned = 0.184104 Jy
! Component: 200  -  total flux cleaned = 0.196209 Jy
! Total flux subtracted in 200 components = 0.196209 Jy
! Clean residual min=-0.006292 max=0.007029 Jy/beam
! Clean residual mean=-0.000017 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 0.196209 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.196209 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.132 mas, bmaj=1.402 mas, bpa=12.89 degrees
! Estimated noise=0.347438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139026 Jy
! Component: 100  -  total flux cleaned = 0.0222562 Jy
! Component: 150  -  total flux cleaned = 0.0280104 Jy
! Component: 200  -  total flux cleaned = 0.0325348 Jy
! Total flux subtracted in 200 components = 0.0325348 Jy
! Clean residual min=-0.003555 max=0.003637 Jy/beam
! Clean residual mean=-0.000026 rms=0.001076 Jy/beam
! Combined flux in latest and established models = 0.228744 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 52 components and 0.228744 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.46 mas, bmaj=3.056 mas, bpa=10.77 degrees
! Estimated noise=0.424462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616861 Jy
! Component: 100  -  total flux cleaned = 0.0104859 Jy
! Component: 150  -  total flux cleaned = 0.0136031 Jy
! Component: 200  -  total flux cleaned = 0.0158939 Jy
! Total flux subtracted in 200 components = 0.0158939 Jy
! Clean residual min=-0.003243 max=0.002685 Jy/beam
! Clean residual mean=-0.000014 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.244638 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173788 Jy
! Component: 100  -  total flux cleaned = 0.00311615 Jy
! Component: 150  -  total flux cleaned = 0.00424583 Jy
! Component: 200  -  total flux cleaned = 0.0051784 Jy
! Total flux subtracted in 200 components = 0.0051784 Jy
! Clean residual min=-0.002471 max=0.002243 Jy/beam
! Clean residual mean=-0.000001 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.249816 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 121 components and 0.249816 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.132 mas, bmaj=1.402 mas, bpa=12.89 degrees
! Estimated noise=0.347438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00070528 Jy
! Component: 100  -  total flux cleaned = 0.00087248 Jy
! Component: 150  -  total flux cleaned = 0.00105121 Jy
! Component: 200  -  total flux cleaned = 0.00114634 Jy
! Total flux subtracted in 200 components = 0.00114634 Jy
! Clean residual min=-0.002073 max=0.001881 Jy/beam
! Clean residual mean=0.000001 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.250962 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 139 components and 0.250962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053260Jy  sigma=1.447230
! Fit after  self-cal, rms=0.053244Jy  sigma=1.446661
wmodel /J1442+3234_X_map.mod
! wmodel: Unable to open new model file: /J1442+3234_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1442+3234_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.132 x 1.402 at 12.89 degrees (North through East)
! Clean map  min=-0.0019368  max=0.17577 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1442+3234_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.175775 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000482306 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.823165 0.823165 1.64633 3.29266 6.58532 13.1706 26.3413 52.6826
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.175 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  364.446 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1442+3234_X_dfm.log closed on Fri May 20 00:11:30 2016