! Started logfile: /scr/pima/bg219a_uvs/J1440+0157_X_dfm.log on Fri May 20 00:10:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1440+0157_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1440+0157_X_uva.fits
! AN table 1: 36 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.68254 visibilities/baseline/integration-bin.
! Found source: J1440+0157
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 6192 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1440+0157_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008197Jy  sigma=28.459200
! Fit after  self-cal, rms=0.886953Jy  sigma=24.907407
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.635 mas, bmaj=1.767 mas, bpa=-4.583 degrees
! Estimated noise=0.54163 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0804964 Jy
! Component: 100  -  total flux cleaned = 0.106489 Jy
! Total flux subtracted in 100 components = 0.106489 Jy
! Clean residual min=-0.006509 max=0.012040 Jy/beam
! Clean residual mean=0.000006 rms=0.002120 Jy/beam
! Combined flux in latest and established models = 0.106489 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.106489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056753Jy  sigma=1.589591
! Fit after  self-cal, rms=0.056556Jy  sigma=1.583115
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137349 Jy
! Component: 100  -  total flux cleaned = 0.0212238 Jy
! Total flux subtracted in 100 components = 0.0212238 Jy
! Clean residual min=-0.005002 max=0.005451 Jy/beam
! Clean residual mean=0.000003 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.127713 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.127713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051373Jy  sigma=1.420215
! Fit after  self-cal, rms=0.051384Jy  sigma=1.419474
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7921 mas, bmaj=2.113 mas, bpa=-5.153 degrees
! Estimated noise=0.346488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00840794 Jy
! Component: 100  -  total flux cleaned = 0.0123426 Jy
! Component: 150  -  total flux cleaned = 0.0143614 Jy
! Component: 200  -  total flux cleaned = 0.0154398 Jy
! Total flux subtracted in 200 components = 0.0154398 Jy
! Clean residual min=-0.003244 max=0.005098 Jy/beam
! Clean residual mean=0.000002 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.143153 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.143153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050230Jy  sigma=1.381349
! Fit after  self-cal, rms=0.050243Jy  sigma=1.381034
! Inverting map 
! Added new window around map position (-1.6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00421482 Jy
! Component: 100  -  total flux cleaned = 0.00533258 Jy
! Component: 150  -  total flux cleaned = 0.00559431 Jy
! Component: 200  -  total flux cleaned = 0.00571549 Jy
! Total flux subtracted in 200 components = 0.00571549 Jy
! Clean residual min=-0.002464 max=0.002366 Jy/beam
! Clean residual mean=0.000001 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.148868 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 35 components and 0.148868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049912Jy  sigma=1.370644
! Fit after  self-cal, rms=0.049886Jy  sigma=1.369605
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7921 x 2.113 at -5.153 degrees (North through East)
! Clean map  min=-0.0022673  max=0.11388 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     LA        0.95     MK        1.05     NL        0.98     
!   OV        1.03     PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     LA        1.01     MK        0.99     NL        1.04     
!   OV        0.98     PT        1.05     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        1.01     NL        1.07     
!   OV        1.00     PT        1.01     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        0.97     MK        0.96     NL        1.04     
!   OV        1.00     PT        1.03     SC        0.93     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     LA        1.00     MK        0.97     NL        1.00     
!   OV        1.01     PT        0.98     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.99     MK        0.98     NL        1.08     
!   OV        0.99     PT        1.01     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.97     MK        1.09     NL        1.00     
!   OV        1.03     PT        0.98     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.99     MK        1.01     NL        1.01     
!   OV        1.02     PT        1.00     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.95     MK        0.93     NL        1.07     
!   OV        1.04     PT        0.99     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.97     MK        0.97     NL        1.01     
!   OV        1.00     PT        1.00     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     LA        0.95     MK        0.92     NL        1.02     
!   OV        1.05     PT        1.01     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     LA        0.97     MK        1.00     NL        1.07     
!   OV        0.98     PT        1.05     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.049886Jy  sigma=1.369605
! Fit after  self-cal, rms=0.049454Jy  sigma=1.361859
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7892 mas, bmaj=2.111 mas, bpa=-5.045 degrees
! Estimated noise=0.345483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000675414 Jy
! Component: 100  -  total flux cleaned = 0.000675075 Jy
! Component: 150  -  total flux cleaned = 0.00062333 Jy
! Component: 200  -  total flux cleaned = 0.000600447 Jy
! Total flux subtracted in 200 components = 0.000600447 Jy
! Clean residual min=-0.001990 max=0.001742 Jy/beam
! Clean residual mean=0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.149469 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.149469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049419Jy  sigma=1.360968
! Fit after  self-cal, rms=0.049431Jy  sigma=1.360799
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049431Jy  sigma=1.360799
! Fit after  self-cal, rms=0.049445Jy  sigma=1.355717
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7913 mas, bmaj=2.106 mas, bpa=-5.096 degrees
! Estimated noise=0.345342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312956 Jy
! Component: 100  -  total flux cleaned = 0.000297767 Jy
! Component: 150  -  total flux cleaned = 0.0002526 Jy
! Component: 200  -  total flux cleaned = 0.000186259 Jy
! Total flux subtracted in 200 components = 0.000186259 Jy
! Clean residual min=-0.001721 max=0.001606 Jy/beam
! Clean residual mean=0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.149655 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.149655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049434Jy  sigma=1.355420
! Fit after  self-cal, rms=0.049443Jy  sigma=1.355314
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.18152e-05 Jy
! Component: 100  -  total flux cleaned = -8.90295e-05 Jy
! Component: 150  -  total flux cleaned = -0.000121698 Jy
! Component: 200  -  total flux cleaned = -0.000142547 Jy
! Total flux subtracted in 200 components = -0.000142547 Jy
! Clean residual min=-0.001727 max=0.001626 Jy/beam
! Clean residual mean=0.000000 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.149512 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 57 components and 0.149512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049439Jy  sigma=1.355182
! Fit after  self-cal, rms=0.049438Jy  sigma=1.355177
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049438Jy  sigma=1.355177
! Fit after  self-cal, rms=0.049382Jy  sigma=1.355144
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7911 mas, bmaj=2.106 mas, bpa=-5.123 degrees
! Estimated noise=0.344849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.74207e-05 Jy
! Component: 100  -  total flux cleaned = -8.68481e-05 Jy
! Component: 150  -  total flux cleaned = -0.000105007 Jy
! Component: 200  -  total flux cleaned = -0.000130843 Jy
! Total flux subtracted in 200 components = -0.000130843 Jy
! Clean residual min=-0.001689 max=0.001645 Jy/beam
! Clean residual mean=0.000000 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.149381 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 0.149381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049378Jy  sigma=1.355040
! Fit after  self-cal, rms=0.049378Jy  sigma=1.355031
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.15248e-05 Jy
! Component: 100  -  total flux cleaned = -7.82607e-05 Jy
! Component: 150  -  total flux cleaned = -8.60716e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101321 Jy
! Total flux subtracted in 200 components = -0.000101321 Jy
! Clean residual min=-0.001692 max=0.001658 Jy/beam
! Clean residual mean=0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.14928 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 64 components and 0.14928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049375Jy  sigma=1.354963
! Fit after  self-cal, rms=0.049375Jy  sigma=1.354962
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049375Jy  sigma=1.354962
! Fit after  self-cal, rms=0.049330Jy  sigma=1.354946
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.306 mas, bmaj=4.911 mas, bpa=-10.95 degrees
! Estimated noise=0.468327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252324 Jy
! Component: 100  -  total flux cleaned = -0.000289497 Jy
! Component: 150  -  total flux cleaned = -0.000322048 Jy
! Component: 200  -  total flux cleaned = -0.000345427 Jy
! Total flux subtracted in 200 components = -0.000345427 Jy
! Clean residual min=-0.001874 max=0.001471 Jy/beam
! Clean residual mean=0.000001 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.148935 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 75 components and 0.148935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049329Jy  sigma=1.354918
! Fit after  self-cal, rms=0.049330Jy  sigma=1.354914
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.98235e-05 Jy
! Component: 100  -  total flux cleaned = -8.47782e-05 Jy
! Component: 150  -  total flux cleaned = -9.41973e-05 Jy
! Component: 200  -  total flux cleaned = -9.86791e-05 Jy
! Total flux subtracted in 200 components = -9.86791e-05 Jy
! Clean residual min=-0.001871 max=0.001473 Jy/beam
! Clean residual mean=0.000001 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.148836 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 78 components and 0.148836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049329Jy  sigma=1.354907
! Fit after  self-cal, rms=0.049329Jy  sigma=1.354905
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.791 mas, bmaj=2.106 mas, bpa=-5.15 degrees
! Estimated noise=0.344482 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.791 x 2.106 at -5.15 degrees (North through East)
! Clean map  min=-0.0014298  max=0.11361 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6359 mas, bmaj=1.766 mas, bpa=-4.591 degrees
! Estimated noise=0.540252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0800519 Jy
! Component: 100  -  total flux cleaned = 0.106754 Jy
! Component: 150  -  total flux cleaned = 0.120779 Jy
! Component: 200  -  total flux cleaned = 0.128771 Jy
! Total flux subtracted in 200 components = 0.128771 Jy
! Clean residual min=-0.004710 max=0.004516 Jy/beam
! Clean residual mean=0.000003 rms=0.001221 Jy/beam
! Combined flux in latest and established models = 0.128771 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.128771 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.791 mas, bmaj=2.106 mas, bpa=-5.15 degrees
! Estimated noise=0.344482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00860514 Jy
! Component: 100  -  total flux cleaned = 0.0131823 Jy
! Component: 150  -  total flux cleaned = 0.0159166 Jy
! Component: 200  -  total flux cleaned = 0.017584 Jy
! Total flux subtracted in 200 components = 0.017584 Jy
! Clean residual min=-0.001882 max=0.001709 Jy/beam
! Clean residual mean=0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.146355 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 30 components and 0.146355 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.306 mas, bmaj=4.911 mas, bpa=-10.95 degrees
! Estimated noise=0.468327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173472 Jy
! Component: 100  -  total flux cleaned = 0.00223512 Jy
! Component: 150  -  total flux cleaned = 0.00228658 Jy
! Component: 200  -  total flux cleaned = 0.00232652 Jy
! Total flux subtracted in 200 components = 0.00232652 Jy
! Clean residual min=-0.002008 max=0.001457 Jy/beam
! Clean residual mean=0.000001 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.148682 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.20149e-05 Jy
! Component: 100  -  total flux cleaned = 5.00137e-05 Jy
! Component: 150  -  total flux cleaned = 6.45291e-05 Jy
! Component: 200  -  total flux cleaned = 7.75774e-05 Jy
! Total flux subtracted in 200 components = 7.75774e-05 Jy
! Clean residual min=-0.001940 max=0.001430 Jy/beam
! Clean residual mean=0.000001 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.14876 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 60 components and 0.148759 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.791 mas, bmaj=2.106 mas, bpa=-5.15 degrees
! Estimated noise=0.344482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.29541e-06 Jy
! Component: 100  -  total flux cleaned = -2.39989e-06 Jy
! Component: 150  -  total flux cleaned = 1.71208e-05 Jy
! Component: 200  -  total flux cleaned = 4.85829e-05 Jy
! Total flux subtracted in 200 components = 4.85829e-05 Jy
! Clean residual min=-0.001583 max=0.001643 Jy/beam
! Clean residual mean=0.000000 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.148808 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 74 components and 0.148808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.049339Jy  sigma=1.355139
! Fit after  self-cal, rms=0.049333Jy  sigma=1.355071
wmodel /J1440+0157_X_map.mod
! wmodel: Unable to open new model file: /J1440+0157_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1440+0157_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.791 x 2.106 at -5.15 degrees (North through East)
! Clean map  min=-0.0013875  max=0.11342 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1440+0157_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.113423 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000353003 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.933678 0.933678 1.86736 3.73471 7.46942 14.9388 29.8777 59.7554
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.113 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  321.309 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1440+0157_X_dfm.log closed on Fri May 20 00:11:02 2016