! Started logfile: /scr/pima/bg219a_uvs/J1440+0127_X_dfm.log on Fri May 20 00:10:52 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219a_uvs/J1440+0127_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219a_uvs/J1440+0127_X_uva.fits
! AN table 1: 52 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.600733 visibilities/baseline/integration-bin.
! Found source: J1440+0127
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 7872 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1440+0127_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001903Jy  sigma=29.144646
! Fit after  self-cal, rms=0.965498Jy  sigma=28.081475
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7297 mas, bmaj=6.231 mas, bpa=-21.81 degrees
! Estimated noise=0.48956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278211 Jy
! Component: 100  -  total flux cleaned = 0.0339399 Jy
! Total flux subtracted in 100 components = 0.0339399 Jy
! Clean residual min=-0.002821 max=0.002737 Jy/beam
! Clean residual mean=0.000000 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.0339399 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0339399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.046270Jy  sigma=1.294486
! Fit after  self-cal, rms=0.044548Jy  sigma=1.243687
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9659 mas, bmaj=5.871 mas, bpa=-21.54 degrees
! Estimated noise=0.296902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289872 Jy
! Component: 100  -  total flux cleaned = 0.00358234 Jy
! Component: 150  -  total flux cleaned = 0.00372754 Jy
! Component: 200  -  total flux cleaned = 0.00388049 Jy
! Total flux subtracted in 200 components = 0.00388049 Jy
! Clean residual min=-0.001501 max=0.001628 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.0378204 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 29 components and 0.0378204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.044277Jy  sigma=1.236477
! Fit after  self-cal, rms=0.044208Jy  sigma=1.235047
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9659 x 5.871 at -21.54 degrees (North through East)
! Clean map  min=-0.0016098  max=0.038126 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    LA        1.00*    MK        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     LA        0.94     MK        1.18     NL        1.09     
!   OV        1.03     PT        1.00     SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     LA        0.92     MK        1.08     NL        1.13     
!   OV        1.03     PT        1.06     SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     LA        0.98     MK        0.98     NL        0.98     
!   OV        1.03     PT        1.06     SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        1.02     MK        0.94     NL        0.95     
!   OV        0.97     PT        1.17     SC        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     LA        0.96     MK        1.03     NL        1.02     
!   OV        1.02     PT        0.96     SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        1.02     MK        1.08     NL        0.94     
!   OV        0.94     PT        0.98     SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        1.07     MK        1.03     NL        0.99     
!   OV        1.01     PT        0.92     SC        1.00*    
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.14     LA        1.00     MK        0.99     NL        0.88     
!   OV        0.94     PT        1.00     SC        1.00*    
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     LA        0.98     MK        0.92     NL        0.91     
!   OV        1.01     PT        1.03     SC        1.00*    
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.99     MK        0.96     NL        0.91     
!   OV        0.98     PT        0.97     SC        1.00*    
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     LA        0.91     MK        0.99     NL        0.92     
!   OV        0.96     PT        0.91     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.044208Jy  sigma=1.235047
! Fit after  self-cal, rms=0.043522Jy  sigma=1.232715
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9678 mas, bmaj=5.855 mas, bpa=-21.55 degrees
! Estimated noise=0.292335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258719 Jy
! Component: 100  -  total flux cleaned = -0.000112149 Jy
! Component: 150  -  total flux cleaned = 5.65692e-05 Jy
! Component: 200  -  total flux cleaned = 0.000155622 Jy
! Total flux subtracted in 200 components = 0.000155622 Jy
! Clean residual min=-0.001195 max=0.001349 Jy/beam
! Clean residual mean=-0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.037976 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 41 components and 0.037976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043484Jy  sigma=1.231725
! Fit after  self-cal, rms=0.043512Jy  sigma=1.231039
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043512Jy  sigma=1.231039
! Fit after  self-cal, rms=0.043516Jy  sigma=1.227992
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9668 mas, bmaj=5.857 mas, bpa=-21.62 degrees
! Estimated noise=0.292069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.05084e-05 Jy
! Component: 100  -  total flux cleaned = 0.000131426 Jy
! Component: 150  -  total flux cleaned = 0.000144439 Jy
! Component: 200  -  total flux cleaned = 0.000180654 Jy
! Total flux subtracted in 200 components = 0.000180654 Jy
! Clean residual min=-0.001191 max=0.001183 Jy/beam
! Clean residual mean=-0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.0381566 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.0381566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043506Jy  sigma=1.227716
! Fit after  self-cal, rms=0.043535Jy  sigma=1.226612
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.77548e-05 Jy
! Component: 100  -  total flux cleaned = 4.31034e-05 Jy
! Component: 150  -  total flux cleaned = 7.80698e-05 Jy
! Component: 200  -  total flux cleaned = 0.00013343 Jy
! Total flux subtracted in 200 components = 0.00013343 Jy
! Clean residual min=-0.001130 max=0.001172 Jy/beam
! Clean residual mean=-0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0382901 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 0.0382901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043528Jy  sigma=1.226403
! Fit after  self-cal, rms=0.043526Jy  sigma=1.226376
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043526Jy  sigma=1.226376
! Fit after  self-cal, rms=0.043464Jy  sigma=1.226197
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9644 mas, bmaj=5.856 mas, bpa=-21.62 degrees
! Estimated noise=0.290598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.89607e-05 Jy
! Component: 100  -  total flux cleaned = -5.1459e-06 Jy
! Component: 150  -  total flux cleaned = 3.78497e-05 Jy
! Component: 200  -  total flux cleaned = 7.67301e-05 Jy
! Total flux subtracted in 200 components = 7.67301e-05 Jy
! Clean residual min=-0.001114 max=0.001163 Jy/beam
! Clean residual mean=-0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0383668 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.0383668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043457Jy  sigma=1.226027
! Fit after  self-cal, rms=0.043487Jy  sigma=1.225947
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.73195e-05 Jy
! Component: 100  -  total flux cleaned = 4.35734e-06 Jy
! Component: 150  -  total flux cleaned = 5.18187e-05 Jy
! Component: 200  -  total flux cleaned = 7.88346e-05 Jy
! Total flux subtracted in 200 components = 7.88346e-05 Jy
! Clean residual min=-0.001109 max=0.001129 Jy/beam
! Clean residual mean=-0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0384456 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 70 components and 0.0384456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043482Jy  sigma=1.225818
! Fit after  self-cal, rms=0.043473Jy  sigma=1.225613
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043473Jy  sigma=1.225613
! Fit after  self-cal, rms=0.043349Jy  sigma=1.225561
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.402 mas, bmaj=5.687 mas, bpa=-16.12 degrees
! Estimated noise=0.351846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265857 Jy
! Component: 100  -  total flux cleaned = 0.000256006 Jy
! Component: 150  -  total flux cleaned = 0.000291944 Jy
! Component: 200  -  total flux cleaned = 0.000324667 Jy
! Total flux subtracted in 200 components = 0.000324667 Jy
! Clean residual min=-0.000918 max=0.001005 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.0387703 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 80 components and 0.0387703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043347Jy  sigma=1.225483
! Fit after  self-cal, rms=0.043356Jy  sigma=1.225439
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.22582e-05 Jy
! Component: 100  -  total flux cleaned = 9.01798e-05 Jy
! Component: 150  -  total flux cleaned = 0.000120946 Jy
! Component: 200  -  total flux cleaned = 0.000135148 Jy
! Total flux subtracted in 200 components = 0.000135148 Jy
! Clean residual min=-0.000888 max=0.000987 Jy/beam
! Clean residual mean=-0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.0389054 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 89 components and 0.0389054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043356Jy  sigma=1.225407
! Fit after  self-cal, rms=0.043358Jy  sigma=1.225395
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9623 mas, bmaj=5.857 mas, bpa=-21.63 degrees
! Estimated noise=0.289409 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9623 x 5.857 at -21.63 degrees (North through East)
! Clean map  min=-0.0015045  max=0.037433 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7266 mas, bmaj=6.289 mas, bpa=-21.87 degrees
! Estimated noise=0.476894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0283382 Jy
! Component: 100  -  total flux cleaned = 0.0342673 Jy
! Component: 150  -  total flux cleaned = 0.0352955 Jy
! Component: 200  -  total flux cleaned = 0.036058 Jy
! Total flux subtracted in 200 components = 0.036058 Jy
! Clean residual min=-0.002495 max=0.002672 Jy/beam
! Clean residual mean=-0.000000 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.0360581 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0360581 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9623 mas, bmaj=5.857 mas, bpa=-21.63 degrees
! Estimated noise=0.289409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150376 Jy
! Component: 100  -  total flux cleaned = 0.00180261 Jy
! Component: 150  -  total flux cleaned = 0.00209958 Jy
! Component: 200  -  total flux cleaned = 0.00225802 Jy
! Total flux subtracted in 200 components = 0.00225802 Jy
! Clean residual min=-0.001329 max=0.001238 Jy/beam
! Clean residual mean=-0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.0383161 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.0383161 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.402 mas, bmaj=5.687 mas, bpa=-16.12 degrees
! Estimated noise=0.351846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000593073 Jy
! Component: 100  -  total flux cleaned = 0.000636065 Jy
! Component: 150  -  total flux cleaned = 0.000671872 Jy
! Component: 200  -  total flux cleaned = 0.000704524 Jy
! Total flux subtracted in 200 components = 0.000704524 Jy
! Clean residual min=-0.001049 max=0.001224 Jy/beam
! Clean residual mean=-0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0390206 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.47943e-05 Jy
! Component: 100  -  total flux cleaned = 1.53252e-05 Jy
! Component: 150  -  total flux cleaned = 1.5696e-05 Jy
! Component: 200  -  total flux cleaned = 1.5935e-05 Jy
! Total flux subtracted in 200 components = 1.5935e-05 Jy
! Clean residual min=-0.000944 max=0.001137 Jy/beam
! Clean residual mean=-0.000000 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.0390366 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 53 components and 0.0390366 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9623 mas, bmaj=5.857 mas, bpa=-21.63 degrees
! Estimated noise=0.289409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.29732e-05 Jy
! Component: 100  -  total flux cleaned = -4.23395e-05 Jy
! Component: 150  -  total flux cleaned = -5.76022e-05 Jy
! Component: 200  -  total flux cleaned = -5.81105e-05 Jy
! Total flux subtracted in 200 components = -5.81105e-05 Jy
! Clean residual min=-0.001157 max=0.001152 Jy/beam
! Clean residual mean=-0.000000 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.0389784 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 0.0389784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043366Jy  sigma=1.225725
! Fit after  self-cal, rms=0.043370Jy  sigma=1.225654
wmodel /J1440+0127_X_map.mod
! wmodel: Unable to open new model file: /J1440+0127_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219a_uvs/J1440+0127_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9623 x 5.857 at -21.63 degrees (North through East)
! Clean map  min=-0.00187  max=0.036772 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219a_uvs/J1440+0127_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0367721 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000283385 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.31196 2.31196 4.62392 9.24784 18.4957 36.9914 73.9827
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.036 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  129.759 
quit
! Quitting program
! Log file /scr/pima/bg219a_uvs/J1440+0127_X_dfm.log closed on Fri May 20 00:10:54 2016